Multiple realities
(covers information from several alternate timelines)
This article or section is incomplete This page is marked as lacking essential detail, and needs attention. Information regarding expansion requirements may be found on the article's talk page. Feel free to edit this page to assist with this expansion.
Yamato warp core

The internal location of a Galaxy-class warp core

Warp core is the common designation for the main energy reactor powering the propulsion system on warp-capable starships. During the 22nd century, warp reactors aboard NX-class starships were technically known as the "Gravimetric Field Displacement Manifold". (ENT: "Cold Front") The reactor had eight major components. (ENT: "Desert Crossing") A less common name for this core was antimatter reactor core. (TNG: "Booby Trap", display graphic)

The first terran warp core was invented by Zefram Cochrane in 2061 and used in Humanity's first warp capable vessel, the Phoenix in 2063 that led to the event known as First Contact Day where the Human species met the Vulcans. (Star Trek: First Contact; VOY: "Friendship One", "Homestead")

On Federation starships, the warp core usually consists of a matter/antimatter reaction assembly (M/ARA) utilizing deuterium and antideuterium reacting in a dilithium crystal matrix which produces a maximum output of 4,000 teradynes per second. (VOY: "Drone")

22nd century warp cores were designed as oblong cylinders connected by pylon conduits directly into the warp nacelles. (Star Trek: Enterprise) In the 23rd century, the warp core was not situated in the main engineering. The main warp reaction occurred in a dilithium crystal converter assembly which consisted of two flattened rounded nodules situated directly in front of and connected to the warp plasma conduits to the warp engines, which were behind a large metal grate. This system enabeled the dilithium energized plasma from the M/ARA to be drlivered to the warp engines for use. (Star Trek: The Original Series; ENT: "In a Mirror, Darkly, Part II")

By 2270, most Federation warp cores were redesigned to consist of a large warp core unit in the secondary hull with matter (deuterium stored or from bussard collectors) and antimatter(stored in the antimatter pods) being injected into the core intermix chamber vertical conduits, with the resulting energy directed to the dilithium crystal energizer to be charged for use through a horizontal conduit leading out from the rear of the core to twin warp plasma conduits delivering dilithium energized plasma to the warp engines through the engine pylons. (Star Trek: The Motion Picture) The dilithium crystal energizer assembly was modified to be located in a radiation shielded room in main engineering in a later upgrade in the 2280s. (TWOK)The crystal energizer assembly was previously not seen in this newer desigh and must have been located in an area other than Main Engineering. Perhaps the deck below(TMP) The upper section of the vertical core was used to connect the M/ARA directly to the impulse drive urilizing an impulse engine deflection crystal in similar designs from the late 23rd century. Also main phaser banks drew power from the warp reactor or core to increase power. (TMP)

Of the original Constitution-class warp core, only the dilithium crystal converter assembly and the warp engine plasma conduits were ever seen in Star Trek: The Original Series. The first season had a dilithium crystal energizer room only seen in "The Alternative factor". It Is likely the predecessor to the dilithium crystal converter assembly from seasons two and three. The tech evolved over the course of the series. The engine room was modified after season one to include the dilithium crystal converter. They are two round nodules with the crystal chamber in between placed in the center of Main Engineering. The warp plasma conduits were two rows of 5 tall white tubes with pulsating red light behind a safety grate at the back of the main engine room. This was seen throughout the series three seasons. When Doug Drexler was called to design the detailed schematics of a Constitution-class starship, he included a vertical core from the dilithium crystal assembly intersecting a horizontal warp core that runs two decks below main engineering. This would be the M/ARA or integrator utilizing an intermix chamber for the reaction to occur. The resulting energy plasma energized by the dilithium crystal converter assembly into warp plasma transferred to warp engines through the watp plasma conduits[1](X) The Drexler schematic made a prominent appearance on screen in ENT: "In a Mirror, Darkly, Part II".

Star Trek: The Animated Series also featured a vertical component of the warp core, that extended from the dilithium crystal assembly. This would be a logical progression of the technology to what is seen in TMP.

As evidenced by the second draft script of ENT: "Broken Bow", the 22nd century warp core aboard an NX-class starship was originally designed to be vertical and extend through a deck, with a top which was high. A series of levers was at the bottom of the towering engine, and "pulsing pillar[s] of plasma" occasionally rose up through the warp core. Drawing inspiration from the engine of the Constitution-class USS Enterprise in Star Trek: The Motion Picture and motivated by wanting to clearly show the NX-class was a relatively early ship, Production Designer Herman Zimmerman suggested that the NX-class engine be of a horizontal configuration, an idea that was quickly approved by series co-creators and Executive Producers Rick Berman and Brannon Braga. (Star Trek: Communicator issue 135, p. 64; Star Trek: The Magazine Volume 2, Issue 7, p. 52) Changing the engine's orientation made the warp core look obviously different from its equivalents in later Star Trek chronology: warp cores that had typically been vertically positioned. (Star Trek: The Magazine Volume 2, Issue 7, p. 52) The "Broken Bow" script was changed to reflect the alteration and, in the revised final draft of the script, the warp core was described as extending "horizontally across the room." [2] Zimmerman noted, "We talked of a honeycomb design with multiple push and pull rods, accessible through openable doors." (Broken Bow, paperback ed., p. 269) However, the design of the warp core fell into place very quickly. Additionally, because it was to be represented as an engine which required a great deal of maintenance, the warp core was designed to incorporate enough controls and access panels that the crew could busy themselves with working on it. (Star Trek: The Magazine Volume 2, Issue 7, p. 52) Concerning how the warp core turned out, Zimmerman remarked, "It doesn't look like you can't understand it or that it wouldn't break down if all the components weren't working perfectly. So, it's a more realistic propulsion system than the fantastic propulsion system." (Broken Bow, paperback ed., p. 269)

As a safety precaution, the core could be physically ejected from the ship, should an event such as a catastrophic containment failure of the matter-antimatter reaction occur that cannot be corrected. This was first seen in the TOS episode "That Which Survives" There were also some tactical uses for ejecting and detonating a core on purpose. The detonation could for example be used to neutralize the cascade of a subspace tear or push a ship away from the gravity well of a black hole. (TOS: "That Which Survives"; TNG: "Cause and Effect", "All Good Things..."; VOY: "Cathexis", "Day of Honor", "Renaissance Man"; Star Trek: Insurrection; Star Trek)

Antimatter containment is achieved through the use of magnetic fields, which guide and direct the antimatter through the antimatter integrator to injector coils, which precisely compresses and streams the antimatter into the form which enters the intermix chamber. Deuterium, stored in the ship or attracted by the Bussard collectors, is funneled in a stream from the opposite deuterium injector. The resulting energy plasma molecules enter the lattice matrix of the crystallized dilithium chamber, reacting within it and releasing a tuned energy stream in the form of electro-plasma, a highly energetic form of plasma. The electro-plasma is carried by magnetic plasma conduits throughout the power transfer system. In the Federation power transfer grid, this is the electro-plasma distribution network, comprised of EPS conduits and EPS taps. The most energized stream created is the warp plasma, which exits in twin power transfer conduits connected to the warp nacelles. (ENT: "Cold Front", "These Are the Voyages..."; Star Trek: Insurrection) In TOS there were 10 tall warp plasma conduits to the warp nacelles (two rows of 5) at the rear of Main Engineering. All later series had the twin configuration. One for each nacelle or warp engine.

During the 23rd century, dilithium crystals were also used in Klingon warp reactions to generate energy at sufficient levels to enable warp flight. In the late 24th century, Klingon reactors used a tritium intermix, a feature not included in Federation and Romulan ships of the same era. (DS9: "When It Rains...") On Romulan starships, a completely different approach was used; an artificial quantum singularity in the warp core was used to harness the energy necessary to power warp flight. (TNG: "Timescape")

Warp cores on starships left resonance traces, allowing for the ability to track vessels. (VOY: "Caretaker")

A warp core could be towed at warp using a tractor beam if calibrated properly. (VOY: "Day of Honor", "Renaissance Man")

When a warp core went offline, deuterium was a vital fuel to support basic functions of a ships auxiliary fusion reactors and impulse drive. Warp cores from shuttlecraft and shuttlepods could augment power if necessary. (VOY: "The Void")


Ad blocker interference detected!

Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.