Memory Alpha

Travel pod model

Revision as of 04:21, January 26, 2013 by Sennim (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
40,417pages on
this wiki
Real World article
(written from a Production point of view)
Travel pod

Travel pod 5

Only mentioned as being a travel pod in scene 40 of the script of Star Trek: The Motion Picture, the design of the diminutive travel pod did had a long way to fulfillment. Though having made its first appearance in The Motion Picture, it had already been envisioned to appear in the pilot episode of the television series Star Trek: Phase II, "In Thy Image". Nevertheless, when that project was upgraded to a full-blown movie project, a redesign was called for. In the end it resulted in the fact that the design was one of the designs which, until the re-invented Star Trek film of 2009, has been, the Star Trek live-action production that introduced the most new space faring designs at once, in this case, nine.


Original travel pod departing concept by Mike Minor

Minor's pod leaving his orbital office complex

File:Original travel pod concept by Mike Minor .jpg

The latest script requirements of "In Thy Image", the pilot episode of the television project Star Trek: Phase II, did provide a inspection tour by Admiral Kirk and Scotty. As such, per-visualization art was dutifully provided by Production Illustrator Mike Minor. His concepts, however, echoed the more conventional shuttle designs, as has been seen before. The early concept paintings he created for Phase II, showed a travel pod numbered "4". (The Art of Star Trek, pp. 152-153, 168-169)

Travel Pod deign evaluation by Andrew ProbertA

Probert's design evolution

Travel pod early concept by Andrew Probert

Probert's earliest travel pod ideas

Eventually, for Star Trek: The Motion Picture, the design evolved out of the requirement of Gene Roddenberry to have the orbital office complex designed as a cluster of many offices. "Part of his reasoning for that was to provide a cinematic surprise when one of the smaller offices broke away from the others, becoming a small space ship called, in the script, a "Travel Pod". This was the small engineer's inspection vehicle that Scotty would use to ferry Kirk over to the USS Enterprise for his (and our) close inspection of the new ship. My early "pod" concepts were very close to the office shapes, as required, but when Roddenberry introduced "further requirements"–i.e., made changes–it evolved to what was eventually shown on screen.", designer Andrew Probert explained. (Starlog photo guidebook Special Effects, vol. 5, p. 90) On his thoughts behind his design he later elaborated:

"My original concepts had a docking hatch at the rear and a docking ring off-set (like the cockpit of the Millennium Falcon) to the right. Gene wanted the ring moved to the back as a single entry/exit with auto-docking taking the worry out of backing into a docking cavity. When I opened a discussion about the doors, he said that receiving structures would have mechanisms to pull the doors open… connecting to those three recesses in the (lighter) gray doors. Prior to that, after the pod backs in, over twenty latches rotate to an attitude perpendicular to the ring, protruding into a receiving groove. They all move forward, pulling the pod into a hard docking against it’s black sealing-ring. As for the single ‘belly-band’ light,… that was my original concept, having the entire area around the pod illuminated. Being, basically, an Engineers’ inspection car, I thought a lot of light was appropriate. Douglas Trumbull wanted to break that space up and have little dividing panels on them so “they would flash, like the saucer lights in Close Encounters, as it went past camera”. As for the tiny signage, after looking at real military aircraft, I realized a lot of their surfaces were covered with various instructions, labels, and warnings. I went out and bought a bunch of models decal sheets and we all covered that model with what felt right. I knew most of them wouldn’t be ‘seen’… but they would be ‘felt’, helping to make it a bit more realistic." [1]
While the design worked out eventually, Probert was ultimately not entirely satisfied with the craft's appearance. "I was sort of forced into that design solution," he explained. "I would have preferred something a little more 'Probertesque.'" [2]

Full scale mock-up

Travel pod partial full scale mock-up

Full-scale mock-up with actors

As with the previous incarnations (and subsequent ones) of small scale ships, a full scale set was constructed of the travel pod, albeit only the first forward ⅓ of it. It was used to film the live action footage of Admiral Kirk and Scotty in the travel pod as it was heading toward the Enterprise. Rick Sternbach, who at the time was a lowly uncredited production illustrator remembered an incidence,

"The story that I tell people most often is that one morning I came to work about 15 minutes late and found a note on my desk saying, "Robert Wise wants to see you immediately." I thought, "Oh no,, what did I do now?" I went down to Stage 17 where they were filming the sequence when the travel pod leaves the office complex to head out to the drydock. I said, "Mr. Wise I got your note, what can I do for you?" He was very quiet, he said, "You designed the controls in this pod, right?" I said nervously, "Yes, can I help you with something on that? " He walked into the pod where Jimmy Doohan and Bill Shatner were standing around. This is like a thousand dollars a minute production time, and they were waiting for me. So, Mr. Wise stepped up to the back of the pod and he said, "Tell Scotty what to do!" Jimmy was right behind me, and I said, "OK, Jimmy, when you first walk in there's like a systems activation panel, and the lights came on. So he hit the panel, and the lights came on. Then he walked to the front of the pod and got the propulsion system started and the thrusters and the artificial gravity and whatever else, and then he pushed the button to make it go. Mr. Wise thanked me and I went back to work." (Star Trek: The Magazine Volume 2, Issue 8, p. 112)

Studio model

Travel pod beauty shot for publication purposes

The travel pod presenting itself to the world

Travel pod studio model worked upon by Chriss Ross

Ross working upon the travel pod studio model

USS Enterprise spacedock closeup

The miniature model of the travel pod (upper right)

An actual studio model was eventually constructed at Magicam, Inc., where it was worked upon by among others model maker Chris Ross, though Art Director Richard Taylor was less than enamorated with the design, "Roddenberry insisted that the Enterprise have 12ft. in diameter circular doors. Yeah, that’s right, massive circular doors! I asked if the doors could iris open? ‘No’ was the answer. So all craft that docked with the Enterprise also had to have 12ft diameter doors. Do you realize how big a 12ft circular door is? So the travel pod and the Vulcan shuttle had to have 12ft doors on them. It was a silly demand and totally impractical in every respect. It also made the Shuttle that Scottie and Kirk took on the grand tour of the Dry Dock and the New Enterprise a silly looking space shuttle. It had that giant circular door as the whole rear end of the thing." (Star Trek: Creating the Enterprise, pp. 102-103) Apart from the full scale studio model, a very small miniature was constructed to go with the drydock model, where it was seen parked inside the structure. As far as the main model was concerned, Chief Modeler Jim Dow has stated that the scale was 2"=1' (Starlog, issue 27, p. 30).

Constitution class revised port secondary hull section model

Travel pod model filmed at FGC with Enterprise hull model in docking sequence

The travel pods of The Motion Picture were filmed on one of Trumbull's stages at Future General Corporation (FGC). (The Making of Star Trek: The Motion Picture, p. 206) Preparing the travel pod studio model for filming involved Hoyt Yeatman and Alan Harding. (The Making of Star Trek: The Motion Picture, interior color photographs) Though the long shots of the pod were taken with footage of the model with figurines in it, there were shots in which live footage of the actors were composited into footage of the model, or as Douglas Trumbull has stated,

"The live-action footage was shot in a stage against a black velvet and then rear-projected into the travel pod. The model, which was a couple feet long, had a hatch in the rear that was removable; so for the scenes where you see Kirk and Scotty inside. The rear hatch was taken out and the pod was mounted along with a rear projection unit on a rig which allowed both of them to travel down a track together. So what you're seeing is a rear-projected image through the window." (Cinefex, issue 1, p. 15)

For its appearance in Star Trek IV, the travel pod model was refurbished and reused. (Trek: The Unauthorized Story of the Movies, p. 122) Model Shop Supervisor Jeff Mann stated, "We added a back half to [it]." (The Making of the Trek Films, 3rd ed., p. 68)

In its refurbished form, the model has escaped the 40 Years of Star Trek: The Collection and It's A Wrap! sale and auctions, and has been retained by Paramount Pictures as a tour exhibit display piece, having been on tours such as Star Trek World Tour, Star Trek: The Adventure and Star Trek The Exhibition as late as 2011. [3]

Around Wikia's network

Random Wiki