Changes: VOY studio models

Revision as of 18:18, 12 November 2015

Template:Realworld Chronological list of studio models appearing in Star Trek: Voyager.

This list is of all new model designs that first appeared in VOY. Information on models that represented a single design can be found in the articles linked below. Information on models that were recycled or refurbished to represent different vessels or props from different species in all series' will be listed herein.

Studio models

The Original Series • The Animated Series • Films • The Next Generation • Deep Space Nine • Voyager • Enterprise • Discovery • Short Treks • Picard • Lower Decks • Prodigy • Strange New Worlds

VOY Season 1

Intrepid-class

USS Voyager, ventral view — *Intrepid*-class USS *Voyager*
"Caretaker", *et al*.

See main article: Intrepid-class model

Caretaker's array

No information yet

Kazon fighter

The Kazon fighter was a design by Dan Curry. At the time, the production team of Star Trek was spread thin as several productions were in various stages of development (Star Trek Generations, TNG: "All Good Things...", DS9: "The Jem'Hadar" and VOY: "Caretaker" as well as the documentary Journey's End: The Saga of Star Trek: The Next Generation). The regular design team for Voyager had their hands full hammering out the details for the USS Voyager and the Caretaker's array as was related in the book A Vision of the Future - Star Trek: Voyager. To ease the workload, Curry, whose regular function was that of Effects Producer, pitched in by tackling the Kazon ships, wanting to imbue the ships with that culture's "rough, low-tech retro" look. (Star Trek: Communicator issue 105, p. 59) For the same reason the build of the models, once the design was approved, was sub-contracted out to an outside vendor, WonderWorks Inc., who delivered the models as per specification.[1] As one of the most junior employees at WonderWorks, Robert Bonchune was sent to deliver the miniature to the Star Trek motion control stage at Image G. There, he handed the model over to Curry, who wanted to make improvements to it. Curry therefore asked Bonchune to stay behind to help him distress the painting. Bonchune was thrilled to help paint the ship but figured he would likely have no more involvement with Star Trek, though fate intervened to prove him wrong. (Star Trek: The Official Starships Collection, issue 44, pp. 14-15)

Kazon Fighter Studio model undergoing modifications by David Stipes — Stipes performing modifications on the studio model

"About six weeks into motion control photography, the producers decided to change the Kazon Fighter design. I mocked up possible design modifications for producers to look at.", David Stipes recalled.[2] Stipes embellished the studio model with various cardboard add-ons, amongst others the aft and front fins for assessment. Once approved, the modifications were made permanent at Tony Meininger's Brazil-Fabrication & Design. The modifications meant that the footage of the model, shot until that time, had to be re-shot in late October/early November 1994. (Star Trek: Communicator issue 105, p. 59) Part of the modification was the decision to have the model, which was originally conceived as a fighter craft only, to double as the as larger conceived Kazon raider as well. This was achieved by fabricating a cockpit module and a bridge module which were interchangeable on the model, confirmed by Rick Sternbach in private correspondence with Ex Astris Scientia, "I recall the model only vaguely. It was a Dan Curry design and I don't have any details, but essentially you're correct, the model was modified to be either one."

The late decision to have the model design modified, was reflected in the release of Galoob's Micro Machines (Set 66128), that showed the fighter in the configuration of the studio model as originally delivered by WonderWorks.

Kazon fighter studio model at image G — Indeterminate Kazon ship class filmed at Image G

When Caretaker was being filmed neither module was used, either because they were not constructed yet or because they were not conceived yet. Instead a smooth feature was applied to the area of the model were the bridge or cockpit were supposed to be in later episodes. As such it can not be ascertained with absolute certainty what class of vessels the Kazon ships were intended to be in the episode, though the visual of Maje Jabin on his bridge, suggested the larger class. In this configuration, the model is featured at Image G in the VOY Season 1 DVD-special feature, "Red Alert: Visual Effects Season One", where Curry discusses the filming of the models. Template:Brokenlink

As the role of the Kazon as main antagonists was played out early on in the series, no CGI version of the design was ever produced, the few later appearances being either stock footage or LCAR displays.

The physical model, with the cockpit module and measuring 30×7×14 inches, known as Lot 353 and estimated at US$3,000–$5,000 was sold on 6 October 2006 in the 40 Years of Star Trek: The Collection auction, with a winning bid of US$5,000 ($6,000 including buyer's premium).

Additional sources: Kazon Ship Sizes at Ex Astris Scientia

Kazon carrier vessel

File:Kazon carrier vessel, Basics.jpg

Kazon carrier vessel
"Caretaker", et al.

See main article: Kazon carrier vessel

Type 8 shuttlecraft

File:Type8shuttle.jpg

Type 8 shuttlecraft
"Parallax", et al.

See main article: Type 8 shuttlecraft

VOY Season 2

Repto-humanoid vessel

This CGI model and its various modifications made a total of five appearances on Star Trek: Voyager and one in Star Trek: Enterprise.

Additional sources: Redresses of the Reptohumanoid Ship at Ex Astris Scientia

Class 2 shuttle

Cochrane (shuttlecraft) — Class 2 shuttle
"Threshold", *et al.*

See main article: Class 2 shuttle

Cardassian ATR-4107

Dreadnought at warp — Cardassian ATR-4107
"Dreadnought"

See main article: Cardassian ATR-4107

Rakosan fighter

No information yet

VOY Season 3

Akritirian patrol ship

Model variations
	File:Ba'neth starship.jpg
Akritirian patrol ship VOY: "The Chute"	Ba'neth starship VOY: "Riddles"	Unidentified ship VOY: "Drive" (closest to camera)

Lokirrim patrol ship VOY: "Body and Soul"	Lokirrim warship VOY: "Body and Soul"	Ledosian patrol ship VOY: "Natural Law"
File:Unidentified space ship docked at the Ledosian spaceport.jpg	File:Kriosian battlecruiser.jpg	File:Alien vessel fought off by the command module of the Horizon.jpg
Unidentified ship VOY: "Natural Law"	Kriosian battle cruiser ENT: "Precious Cargo"	Alien vessel ENT: "Horizon"

Originally designed for use in Star Trek: Voyager, where it had several appearances as different ships, and later used in Star Trek: Enterprise.

Additional sources: Redresses of the Akritirian Patrol Ship at Ex Astris Scientia

Krenim warship

No information yet

Voth research vessel

No information yet

VOY Season 4

Kradin fighter

See main article: Kradin fighter

Krenim patrol ship

No information yet.

Krenim weapon ship

File:Krenim temporal weapon ship 2.jpg

Krenim weapon ship
"Year of Hell"

No information yet.

Mawasi cruiser

No information yet

Nihydron warship

Possibly belonging to the same species (Nihydron).

Dauntless-class
"Hope and Fear"

See main article: Dauntless-class model

VOY Season 5

Malon export vessel, eleventh gradient

File:Malon freighter, Extreme Risk.jpg

Malon export vessel, eleventh gradient
"Night", et al.

See main article: Malon export vessel, eleventh gradient

Malon shuttle

See main article: Malon shuttle

Devore warship

As a new design, the Devore warship made its first appearance in "Counterpoint". The CGI model [3]^(X) was designed and built at Foundation Imaging by Brandon MacDougall who commented, "The Devore ship was one Mojo asked me to design and model for Voyager season 5 episode "Counterpoint" I made some quick pen and ink designs on paper, Dan C[urry] and David L[ivingston] liked the direction and the rest was history. It was hard to make up my mind what way it would fly and I not sure even Mojo did know. Some of the cool things you do not see is a shuttle bay with yellow internal lighting and hydraulics doors."[4]^(X)

In later appearances, the model was scaled down to represent several smaller vessels of various alien races. It would otherwise unmodified, re-appear as a derelict in Abaddon's Repository of Lost Treasures (VOY: "Alice"), as one of the contestants in the Antarian Trans-stellar Rally, where it would, true to McDougall's comment, fly backwards (VOY: "Drive"), as a stranded alien vessel in VOY: "The Void" and finally as a Sphere Builder vessel, type 1 as part of the battle seen in ENT: "Azati Prime".

Qatai's shuttle

Model variations
File:Qatai's shuttle, fore.jpg		File:Unnamed alien vessel attacking the Delta Flyer in a Borg debris field.jpg
Qatai's shuttle VOY: "Bliss"	Ship component #2 VOY: "Alice"	Unknown starship VOY: "Imperfection"
	File:Qatai's shuttle as unknown ship at Ledosian spaceport, Natural law.jpg	File:Nacona's vessel taking up position against the USS Voyager in an asteroid field.jpg
Unknown starship (right center) VOY: "Drive"	Unknown starship VOY: "Natural Law"	Nocona's vessel VOY: "Homestead"
File:Unnamed starship landing on Rigel X.jpg		File:Yridian shuttle, Twilight.jpg
Unknown starship ENT: "Broken Bow"	Xantoras evacuation transports ENT: "The Breach"	Yridian shuttle ENT: "Twilight"

Additional sources: Redresses of Qatai's Vessel at Ex Astris Scientia.

Borg Queen's vessel

See main article: Borg Queen's vessel

Chaotic space hulk

Model variations
	File:Chaotic space hulk as unknown ship at Ledosian spaceport, Natural law.jpg
Chaotic space hulk VOY: "The Fight"	Unknown starship VOY: "Natural Law"	Romulan drone-ship ENT: "Babel One", "United", "The Aenar"

Originally slated to make an appearance in VOY: "Vis à Vis" as a "ship of the week", the Chaotic space hulk was designed and built as a CGI model at Digital Muse. "They might say "We're looking for some design where we want to have tentacles, but we don't want it to look like an octopus," or things like that.(...)When the team are called on to help with a design, everyone gets a chance, It's actually a free-for-all. I think with "Vis à Vis" we had to come up with three ship designs, but we probably submitted 10 or 12.", John Gross remembered. Initially however, the design was one of the rejected ones, but was utilized in the later episode VOY: "The Fight". As to why it was initially rejected Gross further elaborated, "We ended up using it as the derelict ship in "The Fight". It was very organic, and it was something that didn't fit into the Star Trek universe. The reason it was able to be used in "The Fight" was because of the refracting space; the ship was so broken up you really couldn't see it very clearly. But I know Peter Lauritson likes to avoid having ships that look too much like life forms; Star Trek has a very good reason for having that consistency." (Star Trek: The Magazine Volume 1, Issue 10, p. 71)

That reluctance was put aside later, as the model, slightly modified at Eden FX, made additional appearances as the Romulan drone-ship in several episodes of Star Trek: Enterprise, Season 4. The model was affectionately dubbed "The Flea" by the production team. [5]^(X)

Hazari vessel

This CGI model was originally created for use in Star Trek: Voyager.

Hazari shuttle

This CGI model first appearing in Star Trek: Voyager. A new CGI model of a similar design later appeared as Goroth's starship in Star Trek: Enterprise.

Malon export vessel

File:Malon export vessel, Juggernaut.jpg

Malon export vessel
"Juggernaut"

See main article: Malon export vessel

Nova-class

See main article: Nova-class model

VOY Season 6

Alice

CGI model.

Hierarchy Assault-class

On the origin of the Hierarchy Assault-class Rick Sternbach commented,"I vaguely recall the script saying it was an "alien ship bristling with antennae," since the crew were engaged in massive surveillance operations of everything around them. The two sketches I turned in were pretty different from most other things we'd seen before, maybe the first one more than the second one. Where the design went after that was (...) between Brandon and our VFX guru Dan Curry." [6]^(X) Starting from some of the details of the two sketches Dan Curry (who remarked, "Brandon carried it further when he made his excellent CG version. He really understood the aesthetic I was after…" [7]^(X)), and Brandon MacDougall refined the design further at Foundation Imaging into the final design as it finally appeared in VOY: "Tinker Tenor Doctor Spy" and VOY: "The Void" as a CGI model rendered in Lightwave.

For the seventh season appearance of the Hierarchy in "Renaissance Man", MacDougall altered the forward hull of the ship, by cutting down the number and changing the shape of the portholes and elongating the forward hull, for the ship to become the Hierarchy survey vessel. [8]^(X) The aft section remained largely unchanged. Out of courtesy, MacDougall re-rendered the original configuration for Doug Drexler's blog.

Sternbach's design sketches were later sold on 8 August 2010 as Lot 408 in the Sternbach's design sketches turned up at Propworx' "The official STAR TREK prop and costume auction" of 8 August 2010, where they sold for US$180 (including buyers premium), having been estimated at US$100-$200.

MIDAS array

This CGI model was designed by Rick Sternbach and created as the MIDAS array in VOY: "Pathfinder". It was later reused as the Yosemite 3 research station in ENT: "Zero Hour".

Delta Flyer escape pod

See main article: Delta Flyer escape pod

VOY Season 7

Subspace warhead

See main article: Subspace warhead

Friendship 1

Friendship 1
"Friendship One"

See main article: Friendship 1

SC-4

SC-4
"Endgame"

See main article: SC-4

Model variations
File:Caretakers array.jpg
Caretaker's array "Caretaker"	Suspiria's array "Cold Fire"

Model variations
File:Kazon fighter (fore).jpg	File:Kazon raider (fore).jpg
Kazon fighter "Caretaker"	Kazon raider "State of Flux"	Bothan starship, type 3 "Persistence of Vision"

Model variations
	File:Talaxian fighter.jpg
Rakosan fighter "Dreadnought"	Talaxian fighter "Basics, Part I"

Model variations
File:Nihydron ship.jpg
Nihydron warship "Year of Hell, Part II"	Species 10026 vessel "Dark Frontier"

Model variations
		File:RigelianScoutship.jpg
Hazari vessel VOY: "Think Tank"	Nygean starship VOY: "The Void"	Rigelian scout ship ENT: "Storm Front, Part II", "United"

@@ Line 1: / Line 1: @@
 {{realworld}}
-Chronological list of [[studio model]]s and props appearing in ''[[Star Trek: Voyager]]''.
+Chronological list of [[studio model]]s appearing in ''[[Star Trek: Voyager]]''.
 {{bginfo|This list is of all '''new''' model designs that first appeared in VOY. Information on models that represented a single design can be found in the articles linked below. Information on models that were recycled or refurbished to represent different vessels or props from different species in ''all series''{{'}} will be listed herein.}}
+{{Studio models}}
-==[[VOY Season 1]]==
-===Intrepid class===
+==[[VOY Season 1]]==
+===''Intrepid''-class===
 [[File:USS Voyager, ventral view.jpg|thumb|150px|''Intrepid''-class {{USS|Voyager}}<br/>{{e|Caretaker}}, [[Intrepid_class#Appearances|''et al'']].]]
 * See main article: [[Intrepid class model|''Intrepid''-class model]]
@@ Line 24: / Line 25: @@
 {{clear}}
 ===Kazon fighter===
-[[File:Kazon Fighter studio model in original configuration.jpg|thumb|left|150px|[[Studio model]] at [[Image G]], as originally delivered.]]
+[[File:Kazon Fighter studio model in original configuration.jpg|thumb|left|150px|[[Studio model]] at [[Image G]], as originally delivered]]
+{| class="wiki-sidebar" style="float:right;"
-[[File:Kazon Fighter Studio model undergoing modifications by David Stipes.jpg|thumb|150px|David Stipes performing modifications on the studio model]]
-The '''[[Kazon fighter]]''' was a design by [[Dan Curry]].  At the time, the production team of ''Star Trek'' was spread thin as several productions were in various stages of development ({{film|7}}, {{TNG|All Good Things...}}, {{DS9|The Jem'Hadar}} and {{VOY|Caretaker}} as well as the documentary [[Journey's End: The Saga of Star Trek: The Next Generation]]). The regular design team for ''Voyager'' had their hands full hammering out the details for the {{USS|Voyager}} and the [[Caretaker's array]] as was related in the book ''[[A Vision of the Future - Star Trek: Voyager]]''. To ease the workload, Curry, whose regular function was that of Effects Supervisor, pitched in by tackling the [[Kazon]] ships, wanting to imbue the ships with that culture's "rough, low-tech retro" look. (''[[Star Trek: Communicator]]'', Issue 105, p.59) For the same reason the build of the models, once the design was approved, was sub-contracted out to an outside vendor, [[WonderWorks Inc.]], who delivered the models as per specification.[http://wonderworksweb.com/ftpfolder/Photo/page3.html].
-[[File:Kazon raider studio model.jpg|thumb|left|150px|Studio model in Raider configuration]]
-[[File:Kazon fighter studio model at auction.jpg|thumb|150px|Studio model in fighter configuration]]
-"''About six weeks into motion control photography, the producers decided to change the Kazon Fighter design. I mocked up possible design modifications for producers to look at.''", [[David Stipes]] recalled.[http://www.davidstipes.com/the_star_trek_years/index.php?directory=.&currentPic=8] Stipes embellished the studio model with various cardboard add-ons, amongst others the aft and front fins for assessment. Once approved, the modifications were made permanent at [[Tony Meininger]]'s [[Brazil-Fabrication & Design]]. The modifications meant that the footage of the model, shot until that time, had to be re-shot in late October/early November 1994. (''[[Star Trek: Communicator]]'', Issue 105, p.59) Part of the modification was the decision to have the model, which was originally conceived as a fighter craft only, to double as the as larger conceived [[Kazon raider]] as well. This was achieved by fabricating a cockpit module and a bridge module which were interchangeable on the model, confirmed by [[Rick Sternbach]] in correspondence with [http://www.ex-astris-scientia.org/articles/kazon-sizes.htm Ex Astris Scientia], "''I recall the model only vaguely. It was a Dan Curry design and I don't have any details, but essentially you're correct, the model was modified to be either one.''"
-{{bginfo|The late decision to have the model design modified, was reflected in the release of [[Galoob]]'s [[Galoob#Micro_Machines|Micro Machines]] (Set 66128), that showed the fighter in the configuration of the studio model as originally delivered by WonderWorks.}}
-[[File:Kazon fighter studio model at image G.jpg|thumb|left|150px|Indeterminate Kazon ship class filmed at Image G.]]
-[[File:Maje Jabin's ship.jpg|thumb|150px|[[Maje]] [[Jabin]]'s ship.]]
-When ''Caretaker'' was being filmed neither module was used, either because they were not constructed yet or because they were not conceived yet. Instead a smooth feature was applied to the area of the model were the bridge or cockpit were supposed to be in later episodes. As such it can not be ascertained with absolute certainty what class of vessels the Kazon ships were intended to be in the episode. In this configuration, the model is featured at [[Image G]] in the [[VOY Season 1 DVD]], Red Alert: Visual Effects Season One special, where Curry discusses the filming of the models.[http://www.star-trek-voyager.net/btshtm/bts_sts_vfx_kazon.htm]
-As the role of the Kazon as main antagonists was played out early on in the series, no [[CGI]] version of the design was ever produced, the few later appearances being either stock footage or [[Library Computer Access and Retrieval System|LCAR]] displays.
-The physical model, with the cockpit module and measuring 30x7x14 inches, known as [http://startrekpropcollector.com/trekauctions/items/1778-0353 Lot#353] and estimated at $3,000 &ndash; $5,000 was sold on 6 October 2006 in the [[40 Years of Star Trek: The Collection]] [[Star Trek auctions|auction]], with a winning bid of US$5,000 (US$6,000 including buyer's premium).
-{| class="wiki-sidebar" style="width:100%;"
 |-
 ! colspan="3" style="text-align:center;" id="Model variations" | Model variations
@@ Line 52: / Line 38: @@
 | class="even" | <center>[[Bothan starships|Bothan starship]], type 3<br />{{e|Persistence of Vision}}</center>
 |}
+The '''[[Kazon fighter]]''' was a design by [[Dan Curry]]. At the time, the production team of ''Star Trek'' was spread thin as several productions were in various stages of development ({{film|7}}, {{TNG|All Good Things...}}, {{DS9|The Jem'Hadar}} and {{VOY|Caretaker}} as well as the documentary [[Journey's End: The Saga of Star Trek: The Next Generation]]). The regular design team for ''Voyager'' had their hands full hammering out the details for the {{USS|Voyager}} and the [[Caretaker's array]] as was related in the book ''[[A Vision of the Future - Star Trek: Voyager]]''. To ease the workload, Curry, whose regular function was that of Effects Producer, pitched in by tackling the [[Kazon]] ships, wanting to imbue the ships with that culture's "rough, low-tech retro" look. ({{STC|105}}, p. 59) For the same reason the build of the models, once the design was approved, was sub-contracted out to an outside vendor, [[WonderWorks Inc.]], who delivered the models as per specification.[http://wonderworksweb.com/ftpfolder/Photo/page3.html] As one of the most junior employees at WonderWorks, [[Robert Bonchune]] was sent to deliver the miniature to the ''[[Star Trek]]'' motion control stage at [[Image G]]. There, he handed the model over to Curry, who wanted to make improvements to it. Curry therefore asked Bonchune to stay behind to help him distress the painting. Bonchune was thrilled to help paint the ship but figured he would likely have no more involvement with ''Star Trek'', though fate intervened to prove him wrong. (''[[Star Trek: The Official Starships Collection]], ''issue 44, pp. 14-15)
-* Additional sources: {{exastris|page=/articles/kazon-sizes.htm|title=Kazon Ship Sizes}}
+[[File:Kazon Fighter Studio model undergoing modifications by David Stipes.jpg|thumb|left|150px|Stipes performing modifications on the studio model]]
+{| class="wiki-sidebar" style="float:right;"
+|-
+| colspan="1" align="center" |[[File:Kazon fighter studio model at auction.jpg|150px]]
+| colspan="1" align="center" |[[File:Kazon raider studio model.jpg|150px]]
+|-
+| class="even" | <center>The studio model in its fighter configuration...</center>
+| class="even" | <center>...and in its Raider configuration</center>
+|}
+"''About six weeks into motion control photography, the producers decided to change the Kazon Fighter design. I mocked up possible design modifications for producers to look at.''", [[David Stipes]] recalled.[http://www.davidstipes.com/the_star_trek_years/index.php?directory=.&currentPic=8] Stipes embellished the studio model with various cardboard add-ons, amongst others the aft and front fins for assessment. Once approved, the modifications were made permanent at [[Tony Meininger]]'s [[Brazil-Fabrication & Design]]. The modifications meant that the footage of the model, shot until that time, had to be re-shot in late October/early November 1994. ({{STC|105}}, p. 59) Part of the modification was the decision to have the model, which was originally conceived as a fighter craft only, to double as the as larger conceived [[Kazon raider]] as well. This was achieved by fabricating a cockpit module and a bridge module which were interchangeable on the model, confirmed by [[Rick Sternbach]] in private correspondence with {{eas|articles/kazon-sizes.htm|Ex Astris Scientia}}, "''I recall the model only vaguely. It was a Dan Curry design and I don't have any details, but essentially you're correct, the model was modified to be either one.''"
+{{bginfo|The late decision to have the model design modified, was reflected in the release of [[Galoob]]'s [[Galoob#Micro_Machines|Micro Machines]] (Set 66128), that showed the fighter in the configuration of the studio model as originally delivered by WonderWorks.}}
+[[File:Kazon fighter studio model at image G.jpg|thumb|left|150px|Indeterminate Kazon ship class filmed at Image G]]
+[[File:Maje Jabin's ship.jpg|thumb|150px|Jabin's ship]]
+When ''Caretaker'' was being filmed neither module was used, either because they were not constructed yet or because they were not conceived yet. Instead a smooth feature was applied to the area of the model were the bridge or cockpit were supposed to be in later episodes. As such it can not be ascertained with absolute certainty what class of vessels the Kazon ships were intended to be in the episode, though the visual of [[Maje]] [[Jabin]] on his bridge, suggested the larger class. In this configuration, the model is featured at [[Image G]] in the [[VOY Season 1 DVD]]-special feature, "Red Alert: Visual Effects Season One", where Curry discusses the filming of the models. {{brokenlink|url=http://www.star-trek-voyager.net/btshtm/bts_sts_vfx_kazon.htm}}
+As the role of the Kazon as main antagonists was played out early on in the series, no [[CGI]] version of the design was ever produced, the few later appearances being either stock footage or [[Library Computer Access and Retrieval System|LCAR]] displays.
+The physical model, with the cockpit module and measuring 30&times;7&times;14 inches, known as {{stala|1778-0353|Lot 353}} and estimated at US$3,000&ndash;$5,000 was sold on 6 October 2006 in the ''[[40 Years of Star Trek: The Collection]]'' [[Star Trek auctions|auction]], with a winning bid of US$5,000 ($6,000 including buyer's premium).
+* Additional sources: {{eas|articles/kazon-sizes.htm|Kazon Ship Sizes|external}}
 ===Kazon carrier vessel===
@@ Line 75: / Line 82: @@
 File:Nygean prison ship.jpg|[[Nygean prison ship]]<br />{{VOY|Repentance}}
 </gallery>
-* Additional sources: {{exastris|page=/articles/reptohumanoid.htm|title=Redresses of the Reptohumanoid Ship}}
+* Additional sources: {{eas|articles/reptohumanoid.htm|Redresses of the Reptohumanoid Ship|external}}
 === Class 2 shuttle ===
@@ Line 104: / Line 111: @@
 ===Akritirian patrol ship===
+{| class="wiki-sidebar" style="float:right;"
+|-
+! colspan="3" style="text-align:center;" id="Model variations" | Model variations
+|-
+| colspan="1" align="center" |[[File:Akritirian patrol ship.jpg|150px]]
+| colspan="1" align="center" |[[File:Ba'neth starship.jpg|150px]]
+| colspan="1" align="center" |[[File:Antarian Trans-stellar Rally Starting Line.jpg|150px]]
+|-
+| class="even" | <center>[[Akritirian patrol ship]]<br />{{VOY|The Chute}}</center>
+| class="even" | <center>[[Ba'neth starship]]<br />{{VOY|Riddles}}</center>
+| class="even" | <center>[[Unnamed Delta Quadrant starships|Unidentified ship]]<br />{{VOY|Drive}}<br />(closest to camera)</center>
+|-
+| colspan="1" align="center" |[[File:Lokirrim patrol ship.jpg|150px]]
+| colspan="1" align="center" |[[File:Lokirrim warship.jpg|150px]]
+| colspan="1" align="center" |[[File:Ledosian patrol ship.jpg|150px]]
+|-
+| class="even" | <center>[[Lokirrim patrol ship]]<br />{{VOY|Body and Soul}}</center>
+| class="even" | <center>[[Lokirrim warship]]<br />{{VOY|Body and Soul}}</center>
+| class="even" | <center>[[Ledosian patrol ship]]<br />{{VOY|Natural Law}}</center>
+|-
+| colspan="1" align="center" |[[File:Unidentified space ship docked at the Ledosian spaceport.jpg|150px]]
+| colspan="1" align="center" |[[File:Kriosian battlecruiser.jpg|150px]]
+| colspan="1" align="center" |[[File:Alien vessel fought off by the command module of the Horizon.jpg|150px]]
+|-
+| class="even" | <center>Unidentified ship<br />{{VOY|Natural Law}}</center>
+| class="even" | <center>[[Kriosian battle cruiser]]<br />{{ENT|Precious Cargo}}</center>
+| class="even" | <center>[[Unnamed Alpha and Beta Quadrant starships (22nd century)|Alien vessel]]<br/>{{ENT|Horizon}}</center>
+|}
 Originally designed for use in ''[[Star Trek: Voyager]]'', where it had several appearances as different ships, and later used in ''[[Star Trek: Enterprise]]''.
+* Additional sources: {{eas|articles/akritirian.htm|Redresses of the Akritirian Patrol Ship|external}}
-<gallery>
+{{clear}}
-File:Akritirian patrol ship.jpg|[[Akritirian patrol ship]]<br />{{VOY|The Chute}}
-File:Ba'neth starship.jpg|[[Ba'neth starship]]<br />{{VOY|Riddles}}
-File:Antarian Trans-stellar Rally Starting Line.jpg|[[Unnamed Delta Quadrant starships|Unidentified ship]]<br />{{VOY|Drive}}<br />(closest to camera)
-File:Lokirrim patrol ship.jpg|[[Lokirrim patrol ship]]<br />{{VOY|Body and Soul}}
-File:Lokirrim warship.jpg|[[Lokirrim warship]]<br />{{VOY|Body and Soul}}
-File:Ledosian patrol ship.jpg|[[Ledosian patrol ship]]<br />{{VOY|Natural Law}}
-File:Kriosian battlecruiser.jpg|[[Kriosian battle cruiser]]<br />{{ENT|Precious Cargo}}
-</gallery>
 === Krenim warship ===
@@ Line 135: / Line 163: @@
 ==[[VOY Season 4]]==
+===Kradin fighter===
+[[File:Kradin fighter.jpg|thumb|150px|[[Kradin fighter]]<br />{{e|Nemesis}}]]
+* See main article: [[Kradin fighter]]
+{{clear}}
 ===Krenim patrol ship===
@@ Line 152: / Line 185: @@
 |-
 | colspan="1" align="center" |[[File:Mawasi cruiser.jpg|150px]]
-| colspan="1" align="center" |[[File:Abaddon's ship pieces 1.jpg|150px]]
+| colspan="1" align="center" |[[File:Abaddon's ship pieces 1.jpg|100px]]
 |-
 | class="even" | <center>[[Mawasi cruiser]]<br />{{e|Year of Hell, Part II}}</center>
@@ Line 171: / Line 204: @@
 | class="even" | <center>[[Species 10026 vessel]]<br />{{e|Dark Frontier}}</center>
 |}
+* Possibly belonging to the same species ([[Nihydron]]).
-* ''No information yet''
 {{clear}}
@@ Line 178: / Line 211: @@
 File:Tau Pirate fighter.jpg|[[Tau (pirate)|Tau]]'s pirate fighter<br />{{VOY|Concerning Flight}}
 File:Torat's shuttle.jpg|[[Torat]]'s shuttle<br />{{VOY|Counterpoint}}
-File:Kes's starship.jpg|[[Kes's starship]]<br />{{VOY|Fury}}
+File:Kes' starship.jpg|[[Kes' starship]]<br />{{VOY|Fury}}
 File:Unnamed Delta Quadrant starship in VOY-Drive.jpg|[[Unnamed Delta Quadrant starships|Unnamed Delta Quadrant starship]]<br />{{VOY|Drive}}
 File:Benkaran shuttle.jpg|[[Benkaran shuttle]]<br />{{VOY|Repentance}}
 </gallery>
-* Additional sources: {{exastris|page=/articles/tau.htm|title=Redresses of Tau's Pirate Fighter}}
+* Additional sources: {{eas|articles/tau.htm|Redresses of Tau's Pirate Fighter|external}}
-===Prometheus class===
+===''Prometheus''-class===
-[[File:USS Prometheus, 2374 (fore).jpg|thumb|150px|''Prometheus''-class<br />{{e|Message in a Bottle}}, [[Prometheus_class#Appearances|''et al.'']]]]
+[[File:USS Prometheus, 2374 (fore).jpg|thumb|150px|''Prometheus''-class<br />{{e|Message in a Bottle}}, [[Prometheus class#Appearances|''et al.'']]]]
-* See main article: {{ShipClass|Prometheus}}
+* See main article: {{Class|Prometheus}}
 {{clear}}
-===Dauntless class===
+===''Dauntless''-class===
 [[File:USS Dauntless quarter, Hope and Fear.jpg|thumb|150px|''Dauntless''-class<br />{{e|Hope and Fear}}]]
 * See main article: [[Dauntless class model|''Dauntless''-class model]]
@@ Line 207: / Line 240: @@
 ===Devore warship===
-As a new design, the '''Devore warship''' made its first appearance in {{VOY|Counterpoint}}. The [[CGI model]] [http://drexfiles.wordpress.com/2010/03/28/devore-warship-and-a-host-of-others/] was designed and built at [[Foundation Imaging]] by [[Brandon MacDougall]] who commented, "''The Devore ship was one [[Adam Lebowitz|Mojo]] asked me to design and model for Voyager season 5 episode "Counterpoint" I made some quick pen and ink designs on paper, Dan C''[urry]'' and David L''[ivingston]'' liked the direction and the rest was history. It was hard to make up my mind what way it would fly and I not sure even Mojo did know. Some of the cool things you do not see is a shuttle bay with yellow internal lighting and hydraulics doors.''"[http://drexfiles.wordpress.com/2010/03/28/devore-warship-and-a-host-of-others/#comment-24744]
+As a new design, the '''Devore warship''' made its first appearance in {{e|Counterpoint}}. The [[CGI model]] {{DrexFiles|2010/03/28/devore-warship-and-a-host-of-others/}} was designed and built at [[Foundation Imaging]] by [[Brandon MacDougall]] who commented, "''The Devore ship was one [[Adam Lebowitz|Mojo]] asked me to design and model for Voyager season 5 episode "Counterpoint" I made some quick pen and ink designs on paper, Dan C''[urry]'' and David L''[ivingston]'' liked the direction and the rest was history. It was hard to make up my mind what way it would fly and I not sure even Mojo did know. Some of the cool things you do not see is a shuttle bay with yellow internal lighting and hydraulics doors.''"{{DrexFiles|2010/03/28/devore-warship-and-a-host-of-others/#comment-24744}}
 In later appearances, the model was scaled down to represent several smaller vessels of various alien races. It would otherwise unmodified, re-appear as a derelict in [[Abaddon's Repository of Lost Treasures]] ({{VOY|Alice}}), as one of the contestants in the [[Antarian Trans-stellar Rally]], where it would, true to McDougall's comment, fly backwards ({{VOY|Drive}}), as a stranded alien vessel in {{VOY|The Void}} and finally as a [[Sphere Builder vessels#Type 1|Sphere Builder vessel, type 1]] as part of the battle seen in {{ENT|Azati Prime}}.
@@ Line 219: / Line 252: @@
 ===Qatai's shuttle===
+{| class="wiki-sidebar" style="float:right;"
-For information on this design, see {{exastris|page=/articles/qatai.htm|title=Redresses of Qatai's Vessel}}.
-{| class="wiki-sidebar" style="width:100%;"
 |-
 ! colspan="3" style="text-align:center;" id="Model variations" | Model variations
 |-
 | colspan="1" align="center" |[[File:Qatai's shuttle, fore.jpg|150px]]
-| colspan="1" align="center" |[[File:Abaddon's ship pieces 2.jpg|150px]]
+| colspan="1" align="center" |[[File:Abaddon's ship pieces 2.jpg|100px]]
 | colspan="1" align="center" |[[File:Unnamed alien vessel attacking the Delta Flyer in a Borg debris field.jpg|150px]]
 |-
@@ Line 248: / Line 280: @@
 | class="even" | <center>[[Yridian shuttle (22nd century)|Yridian shuttle]]<br />{{ENT|Twilight}}</center>
 |}
+*Additional sources: {{eas|articles/qatai.htm|Redresses of Qatai's Vessel|external}}.
+{{clear}}
 ===Borg Queen's vessel===
@@ Line 255: / Line 289: @@
 ===Chaotic space hulk===
-[[File:Chaotic space hulk CGI model.jpg|thumb|150px|Chaotic space hulk CGI model]]
+[[File:Chaotic space hulk CGI model.jpg|thumb|left|150px|Chaotic space hulk CGI model]]
+{| class="wiki-sidebar" style="float:right;"
-Originally slated to make an appearance in {{VOY|Vis à Vis}} as a "ship of the week", the '''Chaotic space hulk''' was designed and built as a [[CGI]] model at [[Digital Muse]]. "''They might say "We're looking for some design where we want to have tentacles, but we don't want it to look like an octopus," or things like that.(...)When the team are called on to help with a design, everyone gets a chance, It's actually a free-for-all. I think with "Vis à Vis" we had to come up with three ship designs, but we probably submitted 10 or 12.''", [[John Gross]] remembered. Initially however, the design was one of the rejected ones, but was utilised in the later episode {{VOY|The Fight}}. As to why it was initially rejected Gross further elaborated, "''We ended up using it as the derelict ship in "The Fight". It was very organic, and it was something that didn't fit into the ''Star Trek'' universe. The reason it was able to be used in "The Fight" was because of the refracting space; the ship was so broken up you really couldn't see it very clearly. But I know [[Peter Lauritson]] likes to avoid having ships that look too much like life forms; ''Star Trek'' has a very good reason for having that consistency.''" (''[[Star Trek: The Magazine Volume 1, Issue 10]]'', p.71)
-That reluctance was put aside later, as the model, slightly modified at [[Eden FX]], made additional appearances as the [[Romulan drone-ship]] in several episodes of ''[[Star Trek: Enterprise]]'', [[Star_Trek:_Enterprise#Season_4|Season 4]]. The model was affectionately dubbed "The Flea" by the production team.[http://drexfiles.wordpress.com/2009/04/30/identity-confirmed/]
-{| class="wiki-sidebar" style="width:100%;"
 |-
 ! colspan="3" style="text-align:center;" id="Model variations" | Model variations
@@ Line 271: / Line 302: @@
 | class="even" | <center>[[Romulan drone-ship]]<br />{{ENT|Babel One|United|The Aenar}}</center>
 |}
+Originally slated to make an appearance in {{VOY|Vis à Vis}} as a "ship of the week", the '''Chaotic space hulk''' was designed and built as a [[CGI]] model at [[Digital Muse]]. "''They might say "We're looking for some design where we want to have tentacles, but we don't want it to look like an octopus," or things like that.(...)When the team are called on to help with a design, everyone gets a chance, It's actually a free-for-all. I think with "Vis à Vis" we had to come up with three ship designs, but we probably submitted 10 or 12.''", [[John Gross]] remembered. Initially however, the design was one of the rejected ones, but was utilized in the later episode {{VOY|The Fight}}. As to why it was initially rejected Gross further elaborated, "''We ended up using it as the derelict ship in "The Fight". It was very organic, and it was something that didn't fit into the ''Star Trek'' universe. The reason it was able to be used in "The Fight" was because of the refracting space; the ship was so broken up you really couldn't see it very clearly. But I know [[Peter Lauritson]] likes to avoid having ships that look too much like life forms; ''Star Trek'' has a very good reason for having that consistency.''" ({{STTM|1|10}}, p. 71)
+That reluctance was put aside later, as the model, slightly modified at [[Eden FX]], made additional appearances as the [[Romulan drone-ship]] in several episodes of ''[[Star Trek: Enterprise]]'', [[Star_Trek:_Enterprise#Season_4|Season 4]]. The model was affectionately dubbed "The Flea" by the production team. {{DrexFiles|2009/04/30/identity-confirmed/}}
 ===Hazari vessel===
+{| class="wiki-sidebar" style="float:right;"
-This CGI model was originally created for use in ''Star Trek: Voyager''.
-{| class="wiki-sidebar" style="width:100%;"
 |-
 ! colspan="3" style="text-align:center;" id="Model variations" | Model variations
@@ Line 286: / Line 319: @@
 | class="even" | <center>[[Rigelian scout ship]]<br />{{ENT|Storm Front, Part II|United}}</center>
 |}
+This CGI model was originally created for use in ''Star Trek: Voyager''.
+{{clear}}
 ===Hazari shuttle===
+{| class="wiki-sidebar" style="float:right;"
-This CGI model first appearing in ''[[Star Trek: Voyager]]''. A new CGI model of a similar design later appeared as [[Studio models (ENT)#Goroth's starship|Goroth's starship]] in ''[[Star Trek: Enterprise]]''.
-{| class="wiki-sidebar" style="width:100%;"
 |-
 ! colspan="3" style="text-align:center;" id="Model variations" | Model variations
@@ Line 301: / Line 335: @@
 | class="even" | <center>[[Aksani vessel]]<br />{{e|Drive}}</center>
 |}
+This CGI model first appearing in ''[[Star Trek: Voyager]]''. A new CGI model of a similar design later appeared as [[Studio models (ENT)#Goroth's starship|Goroth's starship]] in ''[[Star Trek: Enterprise]]''.
+{{clear}}
 ===Malon export vessel===
@@ Line 307: / Line 343: @@
 {{clear}}
-===Nova class===
+===''Nova''-class===
+{| class="wiki-sidebar" style="float:right;"
-[[File:USS Equinox, forward.jpg|thumb|150px|''Nova''-class<br />{{e|Equinox}}, [[Nova_class#Appearances|''et al'']].]]
+|-
-* See main article: [[Nova class#Studio model|''Nova''-class]]
+! colspan="3" style="text-align:center;" id="Model variations" | Model variations
+|-
+| colspan="1" align="center" |[[File:USS Equinox, forward.jpg|150px]]
+| colspan="1" align="center" |[[File:USS Rhode Island intercepts SC-4.jpg|150px]]
+|-
+| class="even" | <center>{{Class|Nova}}<br />{{e|Equinox}}</center>
+| class="even" | <center>[[refit]]-''Nova''-class<br />{{e|Endgame}}</center>
+|}
+* See main article: [[Nova class model|''Nova''-class model]]
 {{clear}}
 ==[[VOY Season 6]]==
-===Alice===
+===''Alice''===
+{| class="wiki-sidebar" style="float:right;"
-CGI model.
-{| class="wiki-sidebar" style="width:100%;"
 |-
 ! colspan="3" style="text-align:center;" id="Model variations" | Model variations
@@ Line 324: / Line 368: @@
 | colspan="1" align="center" |[[File:Tellarite shuttle.jpg|150px]]
 |-
-| class="even" | <center>''[[Alice (ship)|Alice]]''<br />{{VOY|Alice}}</center>
+| class="even" | <center>''{{dis|Alice|ship}}''<br />{{VOY|Alice}}</center>
 | class="even" | <center>[[Arkonian patrol ship]]<br />{{ENT|Dawn}}</center>
 | class="even" | <center>[[Tellarite shuttle]]<br />{{ENT|Bounty}}</center>
 |}
+CGI model.
 {{clear}}
-===Hierarchy assault class===
+===Hierarchy ''Assault''-class===
-[[File:Hierarchy Assault Class design sketches by Rick Sternbach.jpg|thumb|150px|[[Rick Sternbach]]'s design sketches]]
+[[File:Hierarchy Assault Class design sketches by Rick Sternbach.jpg|thumb|left|150px|[[Rick Sternbach]]'s design sketches]]
+{| class="wiki-sidebar" style="float:right;"
-On the origin of the '''[[Hierarchy]] {{ShipClass|Assault}}''' [[Rick Sternbach]] commented,"''I vaguely recall the script saying it was an "alien ship bristling with antennae," since the crew were engaged in massive surveillance operations of everything around them. The two sketches I turned in were pretty different from most other things we'd seen before, maybe the first one more than the second one. Where the design went after that was (...) between Brandon and our VFX guru Dan Curry.''"[http://drexfiles.wordpress.com/2009/06/18/hierarchy-ship-voyager/#comment-14294] Starting from some of the details of the two sketches [[Dan Curry]] (who remarked, "''Brandon carried it further when he made his excellent CG version. He really understood the aesthetic I was after…''" [http://drexfiles.wordpress.com/2009/07/01/the-amazing-dan-curry/]), and [[Brandon MacDougall]] refined the design further at [[Foundation Imaging]] into the final design as it finally appeared in {{VOY|Tinker Tenor Doctor Spy}} and {{VOY|The Void}} as a [[CGI model]] rendered in {{w|Lightwave}}.
-For the seventh season appearance of the Hierarchy in {{VOY|Renaissance Man}}, MacDougall altered the forward hull of the ship, by cutting down the number and changing the shape of the portholes and elongating the forward hull, for the ship to become the [[Hierarchy survey vessel]].[http://drexfiles.wordpress.com/2009/06/18/hierarchy-ship-voyager/] The aft section remained largely unchanged. Out of courtesy, MacDougall re-rendered the original configuration for [[Doug Drexler]]'s blog.
-Sternbach's design sketches were later sold on 8 August 2010 as [http://archive.propworx.com/1008/408 Lot #408] in the Sternbach's design sketches turned up at [[Star_Trek_auctions#The_official_STAR_TREK_prop_and_costume_auction|Propworx' "The official STAR TREK prop and costume auction"]] of 8 August 2010 as [http://www.liveauctioneers.com/item/7703353 Lot 408] where they sold for $180 (including buyers premium), being estimated at US$100-$200, where they sold for US$180 (including buyer's premium).
-{| class="wiki-sidebar" style="width:100%;"
 |-
 ! colspan="3" style="text-align:center;" id="Model variations" | Model variations
@@ Line 349: / Line 389: @@
 | class="even" | <center>''[[Hierarchy survey vessel]]''<br />{{e|Renaissance Man}}</center>
 |}
+On the origin of the '''[[Hierarchy]] {{Class|Assault}}''' [[Rick Sternbach]] commented,"''I vaguely recall the script saying it was an "alien ship bristling with antennae," since the crew were engaged in massive surveillance operations of everything around them. The two sketches I turned in were pretty different from most other things we'd seen before, maybe the first one more than the second one. Where the design went after that was (...) between Brandon and our VFX guru Dan Curry.''" {{DrexFiles|2009/06/18/hierarchy-ship-voyager/#comment-14294}} Starting from some of the details of the two sketches [[Dan Curry]] (who remarked, "''Brandon carried it further when he made his excellent CG version. He really understood the aesthetic I was after…''" {{DrexFiles|2009/07/01/the-amazing-dan-curry/}}), and [[Brandon MacDougall]] refined the design further at [[Foundation Imaging]] into the final design as it finally appeared in {{VOY|Tinker Tenor Doctor Spy}} and {{VOY|The Void}} as a [[CGI model]] rendered in {{w|Lightwave}}.
+For the seventh season appearance of the Hierarchy in {{e|Renaissance Man}}, MacDougall altered the forward hull of the ship, by cutting down the number and changing the shape of the portholes and elongating the forward hull, for the ship to become the [[Hierarchy survey vessel]]. {{DrexFiles|2009/06/18/hierarchy-ship-voyager/}} The aft section remained largely unchanged. Out of courtesy, MacDougall re-rendered the original configuration for [[Doug Drexler]]'s blog.
+Sternbach's design sketches were later sold on 8 August 2010 as [http://archive.propworx.com/1008/408 Lot 408] in the Sternbach's design sketches turned up at [[Star Trek auctions#The official STAR TREK prop and costume auction|Propworx' "''The official STAR TREK prop and costume auction''"]] of 8 August 2010, where they sold for US$180 (including buyers premium), having been estimated at US$100-$200.
 === MIDAS array ===
@@ Line 364: / Line 409: @@
 {{clear}}
-===Delta Flyer escape pod===
+===''Delta Flyer'' escape pod===
-[[File:Delta Flyer escape pod.jpg|thumb|150px|Delta Flyer escape pod<br />{{e|Good Shepherd}}]]
+[[File:Delta Flyer escape pod.jpg|thumb|150px|''Delta Flyer'' escape pod<br />{{e|Good Shepherd}}]]
-* See main article: [[Delta Flyer escape pod]]
+* See main article: [[Delta Flyer escape pod|''Delta Flyer'' escape pod]]
-{{clear}}
-=== Borg tactical cube ===
-[[File:Borg tactical cube.jpg|thumb|150px|Borg tactical cube<br />{{e|Unimatrix Zero}}]]
-* See main article: [[Borg tactical cube#Background|Borg tactical cube]]
 {{clear}}
@@ Line 378: / Line 418: @@
 [[File:Subspace warhead emerges from subspace.jpg|thumb|150px|Subspace warhead<br />{{e|Human Error}}]]
 * See main article: [[Subspace warhead]]
+{{clear}}
+=== ''Friendship 1'' ===
+[[File:Friendship 1, profile.jpg|thumb|150px|''Friendship 1''<br />{{e|Friendship One}}]]
+* See main article: ''[[Friendship 1]]''
 {{clear}}
@@ Line 385: / Line 430: @@
 {{clear}}
-{{Studio models}}
 [[Category:Studio models| 6]]


The studio model in its fighter configuration...	...and in its Raider configuration

Model variations

Voth research vessel "Distant Origin"	Turei vessel "Dragon's Teeth"

Model variations

Mawasi cruiser "Year of Hell, Part II"	Ship component #1 "Drive"

Model variations
	File:Wysanti ship imperfection.jpg
Hazari shuttle "Think Tank"	Wysanti starship "Imperfection"	Aksani vessel "Drive"

Model variations

Alice VOY: "Alice"	Arkonian patrol ship ENT: "Dawn"	Tellarite shuttle ENT: "Bounty"

Model variations

Assault class "Tinker Tenor Doctor Spy"	Assault class "The Void"	Hierarchy survey vessel "Renaissance Man"

Model variations
File:Midas array.jpg
MIDAS array VOY: "Pathfinder"	Yosemite 3 research station ENT: "Zero Hour"

Model variations

Nova-class "Equinox"	refit-Nova-class "Endgame"