Fandom

Memory Alpha

Romulan shuttle

Redirected from Romulan shuttlecraft

42,625pages on
this wiki
Add New Page
Discuss6 Share

The Romulan shuttlecraft was used by the Romulan Star Empire in the 2370s. They were approximately the same size as a Danube-class runabout, and could carry at least three passengers. Romulan shuttles were also fitted with a cloaking device. (DS9: "In the Pale Moonlight")

Ships of the class Edit

Appendices Edit

Background information Edit

According to a comparison chart drawn up by Gary Hutzel and Larry Nemecek, the length of the Romulan shuttle was 80 feet, which coincides with the length given in the Technical Manual as stated below. [1]

Studio model Edit

Romulan shuttle studio model detailed by Gary Hutzel

Hutzel putting on the finishing touches on the model

The Romulan shuttle was designed by Doug Drexler at the behest of Gary Hutzel, who, as Drexler recalled, put his request as follows, "It's a brief, almost throwaway shot of the shuttle landing at DS9′s mid ring, and riding the elevator down into the station's hangars. We'll need a design for the shuttle, plus the hangar interior… can a guy like you, do a thing like this, for someone like me?" [2](X) The studio model miniature, which only made one appearance in the entire franchise, was built by Tony Meininger at Brazil-Fabrication & Design. According to Drexler, the pod-like modules appearing in the midsection of the main body, between the nacelle struts, are the passenger compartments. [3](X)

The model was filmed for its only appearance at Image G, where it was handled by among others Dennis Hoerter. [4] No motion control photography was utilized on the model, as no in-flight shots were required. [5](X) Instead, stationary shots were taken of the model inside the maquette of Deep Space 9's shuttlebay, specifically constructed for the episode. [6](X) Nevertheless, the shot did require some work in post-production compositing as Drexler explained, "It did require compositing. Gary shot every element as it's own layer… engine lights, cockpit lights, hangar bay lights… everything. That way, when you get into comp, you can adjust any element you want. I'm nearly certain it's 35mm. The smaller camera would make it easier to get in close." [7](X) The Romulan shuttle was the last full-fledged physical studio model ever built for a Star Trek television production, as CGI modeling was used exclusively afterwards. The reason why a physical studio model was built in this late stage when CGI was already commonplace stemmed from Hutzel's preference to use traditional visual effects techniques over CGI. [8](X)

Technical Manual Edit

The following information of specifications and defenses comes exclusively from the Star Trek: Deep Space Nine Technical Manual:

  • Production Base: Unknown; Romulan Star Empire
  • Type: Long-range warp shuttle
  • Accommodation: Fifteen plus officers, crew, and troops (est.)
  • Power Plant: One artificial singularity-drive warp core feeding two nacelles; one impulse system
  • Dimensions: Length, 24.23 meters; beam, 15.98 meters; height, 6.57 meters
  • Mass: 142.31 metric tonnes (est.)
  • Performance: Warp 9.6 (observed)
  • Armament: Six ship-mounted disruptors; two photon torpedo launchers

Apocrypha Edit

In Star Trek: Armada II, the Romulan shuttle model was reused as the Kestrel-class; however, as an assault vessel carrying 500 Romulan troops, it would have to be significantly larger than the shuttle featured in the show. Star Trek Online also identifies it as the Kestrel-class, designated as a runabout.

External linksEdit

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.