Memory Alpha
Register
Advertisement
Memory Alpha
Real world article
(written from a Production point of view)

Eaglemoss XL Edition USS Enterprise TOS D E promo
Starship models re-scaled to in-universe dimensions
Eaglemoss Starships At In-universe Scale Federation Eaglemoss Starships At In-universe Scale Alien
Federation
Alien
Eaglemoss Starships At In-universe Scale Small Eaglemoss Starships At In-universe Scale Massive
Small
Massive
Star Trek Official Starships Collection model production guide
Production stream for a model without pre-existing studio CG assets
Star Trek Official Starships Collection page spread
Magazine spread

Star Trek: The Official Starships Collection was a British magazine/display model collectible partwork publication and product line that was published by Eaglemoss Collections under its Hero Collector imprint and overall supervision of Project Manager Ben Robinson. Authorized and licensed by Paramount Consumer Products, it had been available in a substantial number of countries worldwide.

Each fortnightly issue included a hand-painted[1] ABS and die-cast metal scaled replica of a starship from the Star Trek universe. Notably, an unparalleled variety of ship designs have been produced as display models for this line, many for the first time, beyond the scope of all other mass-production manufacturers. Eaglemoss' Star Trek starship model line had become by far the largest starship model line(s) of any entertainment media franchise ever released by a single company – especially when taking the near-identically executed follow-up Discovery, Online, Universe, and Lower Decks spin-off/sister collections into account as well. Robinson himself has later intimated that a Star Trek starship model collection of this scope is highly unlikely to be surpassed, or even emulated, anytime soon, "I think it’s pretty clear that there are lots of ships wh[ich]ere we did that were really obscure, that nobody’s going to make again." [91]

Robinson and his team utilized original CGI studio models for reference whenever they are available.[2] A Star Trek Fact Files veteran, reference book author, and custodian of his own Star Trek production art archive, Robinson oversees the preparation of the magazines and the selection, commissioning, and decoration of the starship miniatures. John Ainsworth, Hero Collector's Development Manager, assumed many of Robinson's roles for the production of the miniatures after the first 120 issues.

Robinson has also acted as a co-author and co-editor of the magazine content, which consists of a mix of "in-universe" articles and real world production POV articles dealing with the design and usage of the models in question[3], alongside Marcus Riley (another former member of the Fact Files team) and Mark Wright, and continued to contribute starship articles, [92] much of which eventually finding its way into the company's lines of spin-off reference book series.

Many production-used 3D studio models have been adapted for use as miniatures. Alongside studio assets, starship designers including Rob Bonchune, Adam Buckner, David Carson, Dan Curry, Daren Dochterman, Doug Drexler, Pierre Drolet, John Eaves, Sean Hargreaves, Alex Jaeger, Matt Jefferies, Greg Jein, Joe Jennings, Koji Kuramura, "Mojo" Lebowitz, Jim Martin, Brandon MacDougall, Ed Miarecki, Michael Okuda, Andrew Probert, Mark Rademaker, Alain Rivard, Nilo Rodis-Jamero, Rick Sternbach, Sean Tourangeau, and "Meni" Tsirbas have built or assisted in the construction of these models, provided the original CG files, or have shared background material about their designs.[4] A number of original models have also been provided by other former production staffers and producers, including David Lombardi and Dave Rossi.

Where existing models were unavailable, unusable, or deemed unsuitable for use, many models had been commissioned by the company and wholly recreated by independent contractors including Bonchune[5], Lebowitz, Fabio Passaro's Meshweaver Productions[6], and Ed Giddings of Cgreactor[7].

The models were modified, retexturized, and converted into CAD files by these contractors before CAD tooling masters were created at the Holinail Group, [93] Eaglemoss' manufacturing partner in Dongguan, China. 2D renders were often used for the publication's illustrations and newly-created annotated schematics by its art editors in the UK.

Each accompanying twenty-page magazine (measuring 219 × 284 mm, except as noted) featured comprehensive articles about the design, filming, and on-screen appearances of the original studio model(s). Alongside the use of archival material, new interviews were conducted with a number of Star Trek cast members and production staff for the publication. Reference photographs of studio models, production stills, and concept art reproductions are also used extensively. Detailed "in-universe" information about the vessel's history, crew, weapons, and technology was explored within starship profiles and in other feature articles.

Gift premiums and magazine online versions[8] of many issues were also made available to subscribers.

Following the August 2020 conclusion of the Standard Edition in the UK, new releases for the Bonus, Special, XL, shuttlecraft set, and resin dedication plaque sub-collections continued to be produced for the line, as were magazine binders and hardcover reference books. A number of products have also been re-released in new packaging for direct sale through the UK webshop.

Though the "Standard Edition" had already completed its run by then, some of the other sub-collections of the Collection were still releasing issues when on 12 July 2022 all Eaglemoss product lines came to a sudden and unexpected end, as the company was forced to cease its business activities under the UK Insolvency Act – meaning a company is no longer able to pay off its debts. [94] Though having achieved a considerable portion of its goal, i.e. to have all pre-Kurtzman-era Star Trek ships released in one format or another in the Collection, the bankruptcy of Eaglemoss (which became effective on 5 August 2022, as confirmed by Robinson [95]) meant that the Collection fell short of its lofty goal in the end – albeit not by much.

In 2023, the company (new) Master Replicas had purchased the rights to Eaglemoss's remaining stock, and started to re-issue various ships (and books) from the entire line from March onward, which also included a variety of issues Eaglemoss itself had not yet been able to release themselves because of its 5 August 2022 bankruptcy. [96]

Standard Edition issues (UK)[]

Official Starships Collection Standard Editions logo

Standard Edition models commonly measure between four and six inches long and were released fortnightly. A number of these issues were later reissued in new packaging, and can be viewed below under the Collector's Editions section of Repacks.

In the UK, the Standard Edition release run concluded with issue 180 in August 2020, just two weeks shy of a full eight-year run. The cessation of the Standard Edition release automatically entailed the termination of the subscription service for those eligible customers who had opted to take out one.[9] Nonetheless, the 2020 cessation did not spell out the end of the Collection, as additional issues continued to be regularly released afterwards in the various sub-collections, mentioned hereafter, but these had to be ordered separately and individually at the company's webstores – like it always had needed to be, since none of the sub-collections were ever conceived as part of the subscription setup.

2013 | 2014 | 2015 | 2016 | 2017 | 2018 | 2019 | 2020
No. Cover Title/Contents Model Lng* Scale
2013
1 Star Trek Official Starships Collection Issue 1 USS Enterprise NCC-1701-D

21/08/2013[10]

  • Contents, p. 2
  • Enterprise NCC-1701-D Specification, p. 3
  • USS Enterprise NCC-1701-D, pp. 4-7
  • Saucer Separation, pp. 8-11
  • Designing The Enterprise NCC-1701-D, pp. 12-15
  • Filming The Enterprise NCC-1701-D, pp. 16-17
  • On Screen, p. 18
Eaglemoss 1 Enterprise-D 139 mm 1:4610
2 Star Trek Official Starships Collection Issue 2 USS Enterprise NCC-1701 (2271)

04/09/2013

  • Contents, p. 2
  • Enterprise NCC-1701 Specification, p. 3
  • USS Enterprise NCC-1701 Refit, pp. 4-7
  • Drydock, pp. 8-11
  • Designing The Enterprise Refit, pp. 12-15
  • Filming The Enterprise Refit, pp. 16-17
  • On Screen, p. 18
Eaglemoss 2 Enterprise refit 135 mm 1:2260
3 Star Trek Official Starships Collection Issue 3 Klingon Bird-of-Prey

18/09/2013

  • Contents, p. 2
  • Klingon Bird-of-Prey Specification, p. 3
  • Klingon Defense Force Bird-of-Prey, pp. 4-7
  • Wing Position, pp. 8-11
  • Designing The Bird-of-Prey, pp. 12-15
  • Filming The Bird-of-Prey, pp. 16-17
  • On Screen, p. 18
Eaglemoss 3 Klingon Bird of Prey 88 mm
135 mm w
1:1580
4 Star Trek Official Starships Collection Issue 4 Enterprise NX-01

02/10/2013

  • Contents, p. 2
  • Enterprise NX-01 Specification, p. 3
  • Enterprise NX-01, pp. 4-7
  • First Flight, pp. 8-11
  • Designing The Enterprise NX-01, pp. 12-15
  • Becoming The Enterprise NX-01.5, pp. 16-17
  • On Screen, p. 18
Eaglemoss 4 Enterprise NX-01 133 mm 1:1700
5 Star Trek Official Starships Collection Issue 5 Romulan Warbird

16/10/2013

  • Contents, p. 2
  • Romulan Warbird Specification, p. 3
  • Romulan Star Empire Warbird, pp. 4-9
  • Introducing The Romulans, pp. 10-13
  • Designing The Romulan Warbird, pp. 14-17
  • On Screen, p. 18
Eaglemoss 5 Romulan Warbird 135 mm 1:10000
6 Star Trek Official Starships Collection Issue 6 USS Voyager NCC-74656

30/10/2013

  • Contents, p. 2
  • USS Voyager NCC-74656 Specification, p. 3
  • USS Voyager NCC-74656, pp. 4-7
  • Voyager's Aeroshuttle, pp. 8-11
  • Designing The USS Voyager, pp. 12-15
  • Filming The USS Voyager, pp. 16-17
  • On Screen, p. 18
Eaglemoss 6 USS Voyager 135 mm 1:2541
7 Star Trek Official Starships Collection Issue 7 K't'inga-Class Battle Cruiser

13/11/2013

  • Contents, p. 2
  • K't'inga-Class Battle Cruiser Specification, p. 3
  • Klingon K't'inga-Class Battle Cruiser, pp. 4-11
  • Designing The K't'inga-Class, pp. 12-15
  • Filming The K't'inga-Class, pp. 16-17
  • On Screen, p. 18
Eaglemoss 7 Ktinga Battle Cruiser 134 mm 1:2610
8 Star Trek Official Starships Collection Issue 8 USS Excelsior NCC-2000

27/11/2013

  • Contents, p. 2
  • USS Excelsior NCC-2000 Specification, p. 3
  • USS Excelsior NCC-2000, pp. 4-11
  • Designing The USS Excelsior, pp. 12-15
  • Studio Models: The Filming Of The USS Excelsior, pp. 16-17
  • On Screen, p. 18
Eaglemoss 8 USS Excelsior 135 mm 1:3470
9 Star Trek Official Starships Collection Issue 9 USS Defiant NX-74205

11/12/2013

  • Contents, p. 2
  • USS Defiant NX-74205 Specification, p. 3
  • USS Defiant NX-74205, pp. 4-11
  • Designing The USS Defiant, pp. 12-15
  • Creating & Filming The USS Defiant, pp. 16-17
  • On Screen, p. 18
Eaglemoss 9 USS Defiant 110 mm 1:1550
10 Star Trek Official Starships Collection Issue 10 Borg Sphere

25/12/2013

  • Contents, p. 2
  • Borg Sphere Specification, p. 3
  • Borg Sphere, pp. 4-7
  • Borg Assimilation, pp. 8-11
  • Designing The Borg Sphere, pp. 12-13
  • Designing The Borg Queen, pp. 14-17
  • On Screen, p. 18
Eaglemoss 10 Borg Sphere 67 mm ø 1:9000
2014
11 Star Trek Official Starships Collection Issue 11 USS Reliant NCC-1864

08/01/2014

  • Contents, p. 2
  • USS Reliant NCC-1864 Specification, p. 3
  • USS Reliant NCC-1864, pp. 4-7
  • Battle Of The Mutara Nebula, pp. 8-11
  • Designing The USS Reliant, pp. 12-15
  • Building & Filming The Reliant, pp. 16-17
  • On Screen, p. 18
Eaglemoss 11 USS Reliant 115 mm 1:2113
12 Star Trek Official Starships Collection Issue 12 USS Thunderchild NCC-63549

22/01/2014

  • Contents, p. 2
  • Akira-Class Specification, p. 3
  • The Akira-Class, pp. 4-9
  • Designing The Akira-Class, pp. 10-15
  • Creating The CGI Akira-Class, pp. 16-17
  • On Screen, p. 18
Eaglemoss 12 USS Thunderchild 120 mm 1:3870 [11]
13 Star Trek Official Starships Collection Issue 13 Jem'Hadar Battlecruiser

05/02/2014

  • Contents, p. 2
  • Jem'Hadar Battle Cruiser Specification, p. 3
  • Jem'Hadar Battle Cruiser, pp. 4-9
  • Creating The Dominion, pp. 10-13
  • Designing The Battle Cruiser, pp. 14-17
  • On Screen, p. 18
Eaglemoss 13 Jem Hadar Cruiser 105 mm
110 mm w
1:6120
14 Star Trek Official Starships Collection Issue 14 Cardassian Galor Class

19/02/2014

  • Contents, p. 2
  • Galor-Class Warship Specification, p. 3
  • Cardassian Galor-class, pp. 4-9
  • The Changing Face Of Gul Dukat, pp. 10-13
  • Designing The Galor-Class, pp. 14-17
  • On Screen, p. 18
Eaglemoss 14 Cardassian Galor 139 mm 1:2660
15 Star Trek Official Starships Collection Issue 15 USS Equinox NCC-72381

05/03/2014

  • Contents, p. 2
  • USS Equinox NCC-72381 Specification, p. 3
  • USS Equinox NCC-72381, pp. 4-7
  • Master Systems Display, pp. 8-11
  • Designing The USS Equinox NCC-72381, pp. 12-15
  • Voyager's Journey, pp. 16-17
  • On Screen, p. 18
Eaglemoss 15 USS Equinox 132 mm 1:1680
16 Star Trek Official Starships Collection Issue 16 Ferengi Marauder

19/03/2014

  • Contents, p. 2
  • Ferengi Marauder Specification, p. 3
  • Ferengi Marauder, pp. 4-9
  • Creating The Ferengi, pp. 10-13
  • Designing The Ferengi Marauder, pp. 14-17
  • On Screen, p. 18
Eaglemoss 16 Ferengi Marauder 101 mm 1:3620
17 Star Trek Official Starships Collection Issue 17 USS Dauntless NX-01-A

02/04/2014

  • Contents, p. 2
  • USS Dauntless NX-01-A Specification, p. 3
  • USS Dauntless NX-01-A, pp. 4-9
  • Designing The USS Dauntless NX-01-A, pp. 10-13
  • Creating Seven of Nine, pp. 14-17
  • On Screen, p. 18
Eaglemoss 17 USS Dauntless 140 mm 1:1470
18 Star Trek Official Starships Collection Issue 18 Bajoran Solar-Sailor

16/04/2014

  • Contents, p. 2
  • Bajoran Solar-Sailor Specification, p. 3
  • Bajoran Solar-Sailor, pp. 4-9
  • The Bajoran System, pp. 10-11
  • Designing The Bajoran Solar-Sailor, pp. 12-17
  • On Screen, p. 18
Eaglemoss 18 Bajoran Solar Sailer 83 mm
140 mm w
1:557 [12]
19 Star Trek Official Starships Collection Issue 19 USS Stargazer NCC-2893

30/04/2014

  • Contents, p. 2
  • USS Stargazer NCC-2893 Specification, p. 3
  • USS Stargazer NCC-2893, pp. 4-7
  • The Picard Maneuver, pp. 8-11
  • Designing The USS Stargazer NCC-2893, pp. 12-13
  • Filming Starships, pp. 14-17
  • On Screen, p. 18
Eaglemoss 19 USS Stargazer 136 mm 1:2280
20 Star Trek Official Starships Collection Issue 20 Klingon Attack Cruiser

14/05/2014

  • Contents, p. 2
  • Vor'cha-Class Specification, p. 3
  • Klingon Vor'cha-Class Attack Cruiser, pp. 4-9
  • Reinventing The Klingons, pp. 10-13
  • Designing The Vor'cha-Class, pp. 14-17
  • On Screen, p. 18
Eaglemoss 20 Vorcha 135 mm 1:3570
21 Star Trek Official Starships Collection Issue 21 USS Enterprise NCC-1701-E

28/05/2014

  • Contents, p. 2
  • Enterprise NCC-1701-E Specification, p. 3
  • USS Enterprise NCC-1701-E, pp. 4-7
  • Internal Layout, pp. 8-11
  • Designing The Enterprise NCC-1701-E, pp. 12-15
  • Filming The Enterprise NCC-1701-E, pp. 16-17
  • On Screen, p. 18
Eaglemoss 21 USS Enterprise-E 146 mm 1:4680
22 Star Trek Official Starships Collection Issue 22 Krenim Temporal Weapon Ship

11/06/2014

  • Contents, p. 2
  • Krenim Temporal Weapon Ship Specification, p. 3
  • Krenim Temporal Weapon Ship, pp. 4-9
  • Designing The Krenim Temporal Weapon Ship, pp. 10-13
  • The Krenim Warship, pp. 14-15
  • The Krenim Patrol Ship, pp. 16-17
  • On Screen, p. 18
Eaglemoss 22 Krenim Weapon Ship 150 mm 1:10350
23 Star Trek Official Starships Collection Issue 23 Nebula Class (USS Honshu)

25/06/2014

  • Contents, p. 2
  • Nebula Class Specification, p. 3
  • Nebula Class, pp. 4-9
  • Designing The Nebula Class, pp. 10-15
  • Introducing The Cardassians, pp. 16-17
  • On Screen, p. 18
Eaglemoss 23 Nebula Class 101 mm 1:4370
24 Star Trek Official Starships Collection Issue 24 Xindi Insectoid Warship

09/07/2014

  • Contents, p. 2
  • Xindi Insectoid Warship Specification, p. 3
  • Xindi Insectoid Warship, pp. 4-9
  • Designing The Xindi Insectoid Warship, pp. 10-13
  • Making Xindi Insectoids, pp. 14-17
  • On Screen, p. 18
Eaglemoss 24 Xindi-Insectoid Starship 131 mm 1:1150
25 Star Trek Official Starships Collection Issue 25 USS Prometheus NX-59650

23/07/2014

  • Contents, p. 2
  • USS Prometheus NX-59650 Specification, p. 3
  • USS Prometheus, pp. 4-7
  • Ship Separation, pp. 8-11
  • Designing The Prometheus, pp. 12-17
  • On Screen, p. 18
Eaglemoss 25 USS Prometheus 140 mm 1:900 [13]
26 Star Trek Official Starships Collection Issue 26 Tholian Starship (2152)

06/08/2014

  • Contents, p. 2
  • Tholian Starship Specification, p. 3
  • 22nd Century Tholian Starship, pp. 4-9
  • Designing The Tholian Starship, pp. 10-13
  • Reimagining The Tholians, pp. 14-17
  • On Screen, p. 18
Eaglemoss 26 Tholian Starship 129 mm 1:120
27 Star Trek Official Starships Collection Issue 27 Romulan Bird-of-Prey (2152)

20/08/2014

  • Contents, p. 2
  • Romulan Bird-of-Prey Specification, p. 3
  • Romulan 22nd Century Bird-of-Prey, pp. 4-9
  • Designing The Romulan Bird-of-Prey, pp. 10-13
  • The Original Romulans, pp. 14-17
  • On Screen, p. 18
Eaglemoss 27 Romulan Warbird 2152 100 mm
111 mm w
1:1300
28 Star Trek Official Starships Collection Issue 28 Maquis Raider

03/09/2014

  • Contents, p. 2
  • Maquis Raider Specification, p. 3
  • Maquis Raider, pp. 4-9
  • The Studio Model, pp. 10-11
  • The Story Behind The Maquis, pp. 12-17
  • On Screen, p. 18
Eaglemoss 28 Maquis Raider 109 mm 1:630
29 Star Trek Official Starships Collection Issue 29 Jem'Hadar Fighter

17/09/2014

  • Contents, p. 2
  • Jem'Hadar Fighter Specification, p. 3
  • Jem'Hadar Fighter, pp. 4-9
  • Developing The Jem'Hadar, pp. 10-13
  • Designing The Jem'Hadar Fighter, p.p. 14-17
  • On Screen, p. 18
Eaglemoss 29 Jem Hadar Fighter 100 mm 1:680
30 Star Trek Official Starships Collection Issue 30 Nausicaan Fighter

01/10/2014

  • Contents, p. 2
  • Nausicaan Fighter Specification, p. 3
  • Nausicaan Fighter, pp. 4-9
  • Star Trek: Enterprise Visual Effects, pp. 10-15
  • Designing The Nausicaan Fighter, p.p. 16-17
  • On Screen, p. 18
Eaglemoss 30 Nausicaan Fighter 104 mm 1:870
31 Star Trek Official Starships Collection Issue 31 Romulan Warbird Valdore

15/10/2014

  • Contents, p. 2
  • Valdore Specification, p. 3
  • Imperial Romulan Warbird Valdore, pp. 4-9
  • Star Trek Nemesis Screenwriter John Logan, pp. 10-13
  • Designing The Valdore, pp. 14-17
  • On Screen, p. 18
Eaglemoss 31 Valdore 96 mm
139 mm w
1:6270
32 Star Trek Official Starships Collection Issue 32 Starfleet Runabout (USS Orinoco)

29/10/2014

  • Contents, p. 2
  • Runabout Specification, p. 3
  • Starfleet Runabout, pp. 4-9
  • Designing The Runabout, pp. 10-15
  • Building & Filming The Runabout, pp. 16-17
  • On Screen, p. 18
Eaglemoss 32 Danube Class Runabout USS Orinoco 115 mm 1:201
33 Star Trek Official Starships Collection Issue 33 Cardassian Hideki Class

12/11/2014

  • Contents, p. 2
  • Hideki Class Specification, p. 3
  • Cardassian Hideki Class, pp. 4-9
  • Designing The Hideki, pp. 10-13
  • Production Illustrator Jim Martin, pp. 14-17
  • On Screen, p. 18
Eaglemoss 33 Hideki 115 mm 1:746
34 Star Trek Official Starships Collection Issue 34 Vulcan Surak Class

26/11/2014

  • Contents, p. 2
  • Surak Class Specification, p. 3
  • Vulcan Surak Class, pp. 4-9
  • Designing The Surak Class, pp. 10-15
  • Creating The CG Ship, pp. 16-17
  • On Screen, p. 18
Eaglemoss 34 Suurok 140 mm 1:2500
35 Star Trek Official Starships Collection Issue 35 Klingon Bird-of-Prey (2150s)

10/12/2014

  • Contents, p. 2
  • Klingon Bird-of-Prey Specification, p. 3
  • Klingon Defense Force Bird-of-Prey (2150s), pp. 4-11
  • Designing The Bird-of-Prey (2154), pp. 12-13
  • Making Sense Of Klingons, pp. 14-17
  • On Screen, p. 18
Eaglemoss 35 Klingon Bird-of-Prey 2152 90 mm 1:1611
36 Star Trek Official Starships Collection Issue 36 Oberth Class (USS Grissom)

24/12/2014

  • Contents, p. 2
  • Oberth Class Specification, p. 3
  • The Oberth Class, pp. 4-9
  • Production Design On Star Trek III, pp. 10-15
  • Building & Filming The Oberth Class, pp. 16-17
  • On Screen, p. 18
Eaglemoss 36 USS Grissom 135 mm 1:889
2015
37 Star Trek Official Starships Collection Issue 37 Andorian Battle Cruiser

07/01/2015

  • Contents, p. 2
  • Andorian Battle Cruiser Specification, p. 3
  • Andorian Battle Cruiser, pp. 4-9
  • The Return Of The Andorians, pp. 10-15
  • Designing The Andorian Battle Cruiser, pp. 16-17
  • On Screen, p. 18
Eaglemoss 37 Andorian cruiser 140 mm 1:2571
38 Star Trek Official Starships Collection Issue 38 Starfleet Delta Flyer

27/01/2015

  • Contents, p. 2
  • Delta Flyer Specification, p. 3
  • Delta Flyer, pp. 4-9
  • Designing The Delta Flyer, pp. 10-15
  • Creating The CG Delta Flyer, pp. 16-17
  • On Screen, p. 18
Eaglemoss 38 Delta Flyer 125 mm 1:168
39 Star Trek Official Starships Collection Issue 39 Romulan Drone

04/02/2015

  • Contents, p. 2
  • Romulan Drone Specification, p. 3
  • Romulan Drone, pp. 4-9
  • Designing The Romulan Drone, pp. 10-15
  • Starting The Romulan War, pp. 16-17
  • On Screen, p. 18
Eaglemoss 39 Romulan Drone Ship 132 mm 1:265
40 Star Trek Official Starships Collection Issue 40 USS Enterprise NCC-1701-B

18/02/2015

  • Contents, p. 2
  • USS Enterprise NCC-1701-B Specification, p. 3
  • USS Enterprise NCC-1701-B, pp. 4-11
  • Designing The Enterprise-B, pp. 12-15
  • Filming The Saucer Crash Landing, pp. 16-17
  • On Screen, p. 18
Eaglemoss 40 USS Enterprise-B 139 mm 1:3360
41 Star Trek Official Starships Collection Issue 41 Klingon Raptor

04/03/2015

  • Contents, p. 2
  • Klingon Raptor Specification, p. 3
  • Klingon Raptor, pp. 4-9
  • Writing Sleeping Dogs, pp. 10-13
  • Designing The Klingon Raptor, pp. 14-17
  • On Screen, p. 18
Eaglemoss 41 Klingon Raptor 107 mm 1:1355
42 Star Trek Official Starships Collection Issue 42 USS Pasteur NCC-58925

18/03/2015

  • Contents, p. 2
  • USS Pasteur NCC-58925 Specification, p. 3
  • USS Pasteur NCC-58925, pp. 4-9
  • The Next Generation Seventh Season, pp. 10-15
  • The Studio Model Of The USS Pasteur, pp. 16-17
  • On Screen, p. 18
Eaglemoss 42 USS Pasteur 131 mm 1:2442
43 Star Trek Official Starships Collection Issue 43 Species 8472 Bioship

01/04/2015

  • Contents, p. 2
  • Species 8472 Bioship Specification, p. 3
  • Species 8472 Bioship, pp. 4-9
  • Designing The Species 8472 Bioship, pp. 10-17
  • On Screen, p. 18
Eaglemoss 43 Species 8472 Bio-ship 110 mm 1:455
44 Star Trek Official Starships Collection Issue 44 United Earth Starfleet Intrepid

15/04/2015

  • Contents, p. 2
  • UES Intrepid Specification, p. 3
  • United Earth Starfleet Intrepid, pp. 4-9
  • Designing The Intrepid, pp. 10-15
  • Interview Robert Bonchune, pp. 16-17
  • On Screen, p. 18
Eaglemoss 44 Intrepid 106 mm 1:1557
45 Star Trek Official Starships Collection Issue 45 Malon Export Vessel

29/04/2015

  • Contents, p. 2
  • Malon Export Vessel Specification, p. 3
  • Malon Export Vessel, pp. 4-9
  • Designing The Malon Export Vessel, pp. 10-13
  • Star Trek: Voyager Fifth Season, pp. 14-17
  • On Screen, p. 18
Eaglemoss 45 Malon Freighter 118 mm 1:4364
46 Star Trek Official Starships Collection Issue 46 USS Enterprise NCC-1701-C

13/05/2015

  • Contents, p. 2
  • USS Enterprise NCC-1701-C Specification, p. 3
  • USS Enterprise NCC-1701-C, pp. 4-9
  • Designing The Enterprise-C, pp. 10-11
  • The Making Of Yesterday's Enterprise, pp. 12-17
  • On Screen, p. 18
Eaglemoss 46 USS Enterprise-C 140 mm 1:3714
47 Star Trek Official Starships Collection Issue 47 Klingon IKS Negh'Var

27/05/2015

  • Contents, p. 2
  • IKS Negh'Var Specification, p. 3
  • Klingon Defence Force IKS Negh'Var, pp. 4-9
  • Robert O'Reilly On Gowron, pp. 10-13
  • Designing The IKS Negh'Var, pp. 14-17
  • On Screen, p. 18
Eaglemoss 47 IKS Negh'var 110 mm 1:6203
48 Star Trek Official Starships Collection Issue 48 Armored USS Voyager (2378)

10/06/2015

  • Contents, p. 2
  • Armored USS Voyager Specification, p. 3
  • Armored USS Voyager, pp. 4-9
  • Face To Face With The Borg Queens, pp. 10-17
  • On Screen, p. 18
Eaglemoss 48 Armored USS Voyager 135 mm 1:2687 [14]
49 Star Trek Official Starships Collection Issue 49 ECS Fortunate

24/06/2015

  • Contents, p. 2
  • ECS Fortunate Specification, p. 3
  • Earth Cargo Service Fortunate, pp. 4-9
  • Designing The ECS Fortunate, pp. 10-13
  • Space Exploration In The 22nd Century, pp. 14-17
  • On Screen, p. 18
Eaglemoss 49 ECS Fortunate 135 mm 1:2000
50 Star Trek Official Starships Collection Issue 50 USS Enterprise NCC-1701 (2266)

08/07/2015

  • Contents, p. 2
  • USS Enterprise Specification, p. 3
  • USS Enterprise, pp. 4-9
  • Designing The Enterprise, pp. 10-15
  • Making The NCC-1701, pp. 16-17
  • On Screen, p. 18
Eaglemoss 50 USS Enterprise 129 mm 1:2240
51 Star Trek Official Starships Collection Issue 51 Hirogen Warship

22/07/2015

  • Contents, p. 2
  • Hirogen Warship Specification, p. 3
  • Hirogen Warship, pp. 4-9
  • Designing The Hirogen Warship, pp. 10-13
  • Designing Hirogen Technology, pp. 14-17
  • On Screen, p. 18
Eaglemoss 51 Hirogen Hunter 122 mm 1:1230
52 Star Trek Official Starships Collection Issue 52 USS Centaur NCC-42043

05/08/2015

  • Contents, p. 2
  • USS Centaur Specification, p. 3
  • USS Centaur, pp. 4-9
  • Designing The USS Centaur, pp. 10-13
  • Deep Space Nine Goes To War, pp. 14-17
  • On Screen, p. 18
Eaglemoss 52 USS Centaur 120 mm 1:1750
53 Star Trek Official Starships Collection Issue 53 Klingon Augments' Ship

19/08/2015

  • Contents, p. 2
  • Klingon Augments' Ship Specification, p. 3
  • Klingon Augments' Ship, pp. 4-9
  • Designing The Klingon Attack Ship, pp. 10-13
  • The Klingon Forehead Solution, pp. 14-17
  • On Screen, p. 18
Eaglemoss Klingon Attack Ship 100 mm 1:700
54 Star Trek Official Starships Collection Issue 54 Steamrunner Class (USS Appalachia)

02/09/2015

  • Contents, p. 2
  • Steamrunner Class Specification, p. 3
  • Steamrunner Class, pp. 4-9
  • Designing The Steamrunner Class, pp. 10-13
  • Becoming Borg, pp. 14-17
  • On Screen, p. 18
Eaglemoss 54 USS Appalachia 120 mm 1:2967
55 Star Trek Official Starships Collection issue 55 Vulcan D'Kyr Type

16/09/2015

  • Contents, p. 2
  • D'Kyr Type Specification, p. 3
  • Vulcan D'Kyr Type, pp. 4-9
  • Designing The Vulcan D'kyr, pp. 10-13
  • Beginning The Vulcan Reformation, pp. 14-17
  • On Screen, p. 18
Eaglemoss 55 D'kyr Class 119 mm 1:5042
56 Star Trek Official Starships Collection Issue 56 Saber Class (USS Yeager)

30/09/2015

  • Contents, p. 2
  • Saber Class Specification, p. 3
  • Saber Class, pp. 4-9
  • Designing The Saber Class, pp. 10-11
  • Assembling The Borg Queen, pp. 12-17
  • On Screen, p. 18
Eaglemoss 56 USS Yeager 91 mm 1:2451
57 Star Trek Official Starship Collection Issue 57 Romulan Bird-of-Prey (2260s)

14/10/2015

  • Contents, p. 2
  • Romulan Bird-of-Prey Specification, p. 3
  • Romulan 23rd Century Bird-of-Prey, pp. 4-9
  • The Star Trek Designs Of Wah Ming Chang, pp. 10-13
  • The Romulan Empire Before The Tomed Incident, pp. 14-17
  • On Screen, p. 18
Eaglemoss 57 Romulan Bird-of-Prey 2266 86 mm 1:1523
58 Star Trek Official Starships Collection Issue 58 Borg Tactical Cube

28/10/2015

  • Contents, p. 2
  • Borg Tactical Cube Specification, p. 3
  • Borg Tactical Cube, pp. 4-9
  • Designing The Borg Tactical Cube, pp. 10-13
  • The Borg Evolve, pp. 14-17
  • On Screen, p. 18
Eaglemoss 58 Borg Tactical Cube 59 mm³ 1:51525
59 Star Trek Official Starships Collection Issue 59 USS Relativity NCV-474439-G

11/11/2015

  • Contents, p. 2
  • USS Relativity Specification, p. 3
  • USS Relativity NCV-474439-G, pp. 4-9
  • Captain Braxton, pp. 10-13
  • Star Trek: Voyager's Best Special Effects, pp. 14-17
  • On Screen, p. 18
Eaglemoss 59 USS Relativity 128 mm 1:1508
60 Star Trek Official Starships Collection Issue 60 SS Botany Bay

25/11/2015

  • Contents, p. 2
  • SS Botany Bay Specification, p. 3
  • SS Botany Bay, pp. 4-9
  • Designing The SS Botany Bay, pp. 10-13
  • Khan Returns, pp. 14-17
  • On Screen, p. 18
Eaglemoss 60 SS Botany Bay 131 mm 1:794
61 Star Trek Official Starships Collection Issue 61 Norway Class (USS Budapest)

09/12/2015

  • Contents, p. 2
  • Norway Class Specification, p. 3
  • Norway Class, pp. 4-9
  • Creating The Costumes For First Contact, pp. 10-17
  • On Screen, p. 18
Eaglemoss 61 Norway Class 124 mm 1:2942
62 Star Trek Official Starships Collection Issue 62 Voth Research Vessel

23/12/2015

  • Contents, p. 2
  • Voth Research Vessel Specification, p. 3
  • Voth Research Vessel, pp. 4-9
  • Designing The Voth Research Ship, pp. 10-11
  • The Voth Makeup, pp. 12-15
  • On Screen, p. 18
Eaglemoss 62 Voth Research Vessel 130 mm 1:1000
2016
63 Star Trek Official Starships Collection issue 63 Antares NCC-501

06/01/2016

  • Contents, p. 2
  • Antares NCC-501 Specification, p. 3
  • Antares, pp. 4-9
  • Designing The Antares, pp. 10-13
  • Star Trek: The Animated Series, pp. 14-17
  • On Screen, p. 18
Eaglemoss 63 Antares 92 mm 1:1457
64 Star Trek Official Starships Collection Issue 64 (Phoenix)

20/01/2016

  • Contents, p. 2
  • Phoenix Specification, p. 3
  • Phoenix, pp. 4-9
  • Designing The Phoenix, pp. 10-13
  • Creating The Costumes For First Contact, pp. 14-17
  • On Screen, p. 18
Eaglemoss 64 Phoenix 140 mm 1:143
65 Star Trek Official Starships Collection Issue 65 Xindi-Aquatic Cruiser

03/02/2016

  • Contents, p. 2
  • Xindi-Aquatic Cruiser Specification, p. 3
  • Xindi-Aquatic Cruiser, pp. 4-9
  • Creating The Xindi Aquatics, pp. 10-11
  • Designing The Xindi Aquatic Ships, pp. 12-17
  • On Screen, p. 18
Eaglemoss 65 Xindi Aquatic Cruiser 130 mm 1:8650
66 Star Trek Official Starships Collection Issue 66 USS Raven NAR-32450

17/02/2016

  • Contents, p. 2
  • USS Raven Specification, p. 3
  • USS Raven NAR-32450, pp. 4-9
  • Designing The Raven, pp. 10-11
  • The Making Of Dark Frontier, pp. 12-17
  • On Screen, p. 18
Eaglemoss 66 USS Raven 120 mm 1:750
67 Star Trek Official Starships Collection issue 67 Klingon D7-Class Battle Cruiser

02/03/2016

  • Contents, p. 2
  • Klingon D7-Class Battle Cruiser Specification, p. 3
  • Klingon D7-Class Battle Cruiser, pp. 4-9
  • Designing The D7-Class Battle Cruiser, pp. 10-13
  • A History Of The Klingon Language, pp. 14-17
  • On Screen, p. 18
Eaglemoss 67 D7 Class Battlecruiser 137 mm 1:1664
68 Star Trek Official Starships Collection issue 68 Federation Attack Fighter

16/03/2016

  • Contents, p. 2
  • Federation Attack Fighter Specification, p. 3
  • Federation Attack Fighter, pp. 4-9
  • Designing The Federation Fighter, pp. 10-11
  • Digital Revolution, pp. 12-17
  • On Screen, p. 18
Eaglemoss 68 Federation Attack Fighter 90 mm 1:278
69 Star Trek Official Starships Collection issue 69 Breen Warship

30/03/2016

  • Contents, p. 2
  • Breen Warship Specification, p. 3
  • Breen Warship, pp. 4-9
  • Designing The Breen Warship, pp. 10-15
  • Creating The Breen, pp. 16-17
  • On Screen, p. 18
Eaglemoss 69 Breen warship 120 mm 1:2750
70 Star Trek Official Starships Collection issue 70 Voth City Ship

13/04/2016

  • Contents, p. 2
  • Voth City Ship Specification, p. 3
  • Voth City Ship, pp. 4-9
  • Designing The Voth City Ship, pp. 10-13
  • Ancient Life Forms, pp. 14-15
  • Writing 'Distant Origin', pp. 16-17
  • On Screen, p. 18
Eaglemoss 70 Voth city ship 140 mm 1:78571
71 Star Trek Official Starships Collection Issue 71 Goroth's Klingon Transport Ship

27/04/2016

  • Contents, p. 2
  • Goroth's Klingon Transport Ship Specification, p. 3
  • Goroth's Klingon Transport Ship, pp. 4-9
  • Designing Goroth's Klingon Transport Ship, pp. 10-11
  • Returning Aliens, pp. 12-17
  • On Screen, p. 18
Eaglemoss 71 Goroths starship 125 mm 1:704
72 Star Trek Official Starships Collection Issue 72 USS Enterprise NCC-1701-A

11/05/2016

  • Contents, p. 2
  • USS Enterprise NCC-1701-A Specification, p. 3
  • USS Enterprise NCC-1701-A, pp. 4-9
  • Filming The NCC-1701-A, pp. 10-11
  • Nicholas Meyer On Star Trek IV & Star Trek VI, pp. 12-17
  • On Screen, p. 18
Eaglemoss 72 USS Enterprise-A 135 mm 1:2260
73 Star Trek Official Starships Collection Issue 73 Borg Renegades' Ship

25/05/2016

  • Contents, p. 2
  • Borg Renegades' Ship Specification, p. 3
  • Borg Renegades' Ship, pp. 4-9
  • Designing The Borg Renegades' Ship, pp. 10-11
  • Jonathan Del Arco, pp. 12-17
  • On Screen, p. 18
Eaglemoss 73 Borg Type 03 59 mm 1:23300
74 Star Trek Official Starships Collection Issue 74 Bajoran Raider

08/06/2016

  • Contents, p. 2
  • Bajoran Raider Specification, p. 3
  • Bajoran Raider, pp. 4-9
  • Designing The Bajoran Raider, pp. 10-11
  • Creating The Bajorans, pp. 12-17
  • On Screen, p. 18
Eaglemoss 74 Bajoran Raider 120 mm 1:276 [15]
75 Star Trek Official Starships Collection Issue 75 USS Enterprise NCC-1701-E Captain's Yacht

22/06/2016

  • Contents, p. 2
  • Captain's Yacht Specification, p. 3
  • USS Enterprise NCC-1701-E Captain's Yacht, pp. 4-9
  • Star Trek: Insurrection: Designing Starships, pp. 10-13
  • Star Trek: Insurrection: Concept Art, pp. 14-17
  • On Screen, p. 18
Eaglemoss Cousteau 105 mm 1:319
76 Star Trek Official Starships Collection Issue 76 Baxial

06/07/2016

  • Contents, p. 2
  • Baxial Specification, p. 3
  • Baxial, pp. 4-9
  • Designing Neelix's Shuttle, pp. 10-11
  • Ethan Phillips, pp. 12-17
  • On Screen, p. 18
Eaglemoss Baxial 116 mm 1:129
77 Star Trek Official Starships Collection Issue 77 Romulan Shuttle

20/07/2016

  • Contents, p. 2
  • Romulan Shuttle Specification, p. 3
  • Romulan Shuttle, pp. 4-9
  • Designing The Romulan Shuttle, pp. 10-13
  • Andrew Robinson, pp. 14-17
  • On Screen, p. 18
Eaglemoss Romulan Shuttle 119 mm 1:204
78 Star Trek Official Starships Collection Issue 78 USS Voyager's Aeroshuttle

03/08/2016

  • Contents, p. 2
  • Aeroshuttle Specification, p. 3
  • Aeroshuttle, pp. 4-9
  • Designing & Building The Aeroshuttle, pp. 10-13
  • Designing Star Trek: Voyager Sets, pp. 14-17
  • On Screen, p. 18
Eaglemoss Aeroshuttle 90 mm 1:300
79 Star Trek Official Starships Collection Issue 79 Harry Mudd's Class-J Starship (Stella)

17/08/2016

  • Contents, p. 2
  • Harry Mudd's Class-J Starship Specification, p. 3
  • Harry Mudd's Class-J Starship, pp. 4-9
  • Designing Mudd's Starship, pp. 10-11
  • Women Of Star Trek, pp. 12-17
  • On Screen, p. 18
Eaglemoss 79 Harry Mudd's Class-J Starship 111 mm 1:162
80 Star Trek Official Starships Collection issue 80 Federation Mission Scout Ship

31/08/2016

  • Contents, p. 2
  • Federation Mission Scout Ship Specification, p. 3
  • Federation Mission Scout Ship, pp. 4-9
  • Designing & Filming The Federation Mission Scout Ship, pp. 10-11
  • Star Trek: Insurrection Production Diary, pp. 12-17
  • On Screen, p. 18
Eaglemoss Federation Scout 120 mm 1:200
81 Star Trek Official Starships Collection issue 81 Xindi-Reptilian Warship

14/09/2016

  • Contents, p. 2
  • Xindi-Reptilian Warship Specification, p. 3
  • Xindi-Reptilian Warship, pp. 4-9
  • Designing The Xindi-Reptilian Warship, pp. 10-13
  • Xindi Fleet Listings, pp. 14-17
  • On Screen, p. 18
Eaglemoss Xindi Reptilian 139 mm 1:1071
82 Star Trek Official Starships Collection issue 82 United Earth Starfleet Warp Delta

28/09/2016

  • Contents, p. 2
  • UES Warp Delta Specification, p. 3
  • United Earth Starship Warp Delta, pp. 4-9
  • Designing The Warp Delta, pp. 10-11
  • Planet Earth: A Secret History, pp. 12-17
  • On Screen, p. 18
Eaglemoss 82 Warp Delta 105 mm 1:1238
83 Star Trek Official Starships Collection issue 83 Bajoran Assault Vessel

12/10/2016

  • Contents, p. 2
  • Bajoran Assault Vessel Specification, p. 3
  • Bajoran Assault Vessel, pp. 4-9
  • Designing The 'Bajoran Transport', pp. 10-13
  • Bajoran Timeline, pp. 14-17
  • On Screen, p. 18
Eaglemoss 83 Bajoran Interceptor 90 mm 1:1564
84 Star Trek Official Starships Collection issue 84 United Earth Starfleet NX-Alpha

26/10/2016

  • Contents, p. 2
  • NX-Alpha Specification, p. 3
  • United Earth Starfleet NX-Alpha, pp. 4-9
  • Designing The NX-Alpha, pp. 10-13
  • The Road To Warp 5, pp. 14-17
  • On Screen, p. 18
Eaglemoss 84 NX Alpha Prototype 113 mm 1:177
85 Star Trek Official Starships Collection issue 85 Federation Holoship

09/11/2016

  • Contents, p. 2
  • Federation Holoship Specification, p. 3
  • Federation Holoship, pp. 4-9
  • Designing The Federation Holoship, pp. 10-13
  • Star Trek: Insurrection - The Screenplay, pp. 14-17
  • On Screen, p. 18
Eaglemoss 85 Federation Holoship 138 mm 1:1790
86 Star Trek Official Starships Collection issue 86 Gorn Starship

24/11/2016

Eaglemoss 86 Gorn Starship 88 mm 1:2500
87 Star Trek Official Starships Collection issue 87 Federation Timeship Aeon

08/12/2016

  • Contents, p. 2
  • Federation Timeship Aeon Specification, p. 3
  • Federation Timeship Aeon, pp. 4-9
  • Designing The Aeon Timeship, pp. 10-13
  • Star Trek: Beyond The 24th Century, pp. 14-17
  • On Screen, p. 18
Eaglemoss 87 UTS Aeon 130 mm 1:46
88 Star Trek Official Starships Collection issue 88 Vahklas

22/12/2016

  • Contents, p. 2
  • Vahklas Specification, p. 3
  • The Vahklas, pp. 4-9
  • Designing The Vahklas, pp. 10-11
  • Vulcans In The 22nd Century, pp. 12-17
  • On Screen, p. 18
Eaglemoss 88 Vahklas 135 mm 1:815
2017
89 Star Trek Official Starships Collection issue 89 USS Enterprise NCC-1701-J

05/01/2017

  • Contents, p. 2
  • Enterprise-J Specification, p. 3
  • USS Enterprise-J, pp. 4-7
  • Designing The Enterprise-J, pp. 8-15
  • Doug Drexler, pp. 16-17
  • On Screen, p. 18
Eaglemoss USS Enterprise-J 118 mm 1:27280
90 Star Trek Official Starships Collection issue 90 Romulan Scout Ship

19/01/2017

  • Contents, p. 2
  • Romulan Scout Ship Specification, p. 3
  • Romulan Scout Ship, pp. 4-9
  • Designing The Romulan Scout Ship, pp. 10-11
  • Ronald D. Moore, pp. 12-17
  • On Screen, p. 18
Eaglemoss 90 Romulan Scout 120 mm 1:742
91 Star Trek Official Starships Collection issue 91 USS Saratoga NCC-31911

02/02/2017

  • Contents, p. 2
  • USS Saratoga NCC-31911 Specification, p. 3
  • USS Saratoga NCC-31911, pp. 4-9
  • Filming The USS Saratoga NCC-31911, pp. 10-11
  • The Evolution Of Benjamin Sisko, pp. 12-17
  • On Screen, p. 18
Eaglemoss USS Saratoga 120 mm 1:2025
92 Star Trek Official Starships Collection issue 92 Medusan Ship

16/02/2017

  • Contents, p. 2
  • Medusan Ship Specification, p. 3
  • Medusan Ship, pp. 4-9
  • (Designing The) Medusan Ship, pp. 10-11
  • TOS Producer Fred Freiberger, pp. 12-17
  • On Screen, p. 18
Eaglemoss Medusan Ship 81 mm 1:1111
93 Star Trek Official Starships Collection issue 93 ECS Horizon

02/03/2017

  • Contents, p. 2
  • ECS Horizon Specification, p. 3
  • Earth Cargo Service Horizon, pp. 4-9
  • Designing The ECS Horizon, pp. 10-11
  • Space Boomers, pp. 12-17
  • On Screen, p. 18
Eaglemoss ECS Horizon 140 mm 1:1643
94 Star Trek Official Starships Collection issue 94 Suliban Cell Ship

16/03/2017

  • Contents, p. 2
  • Suliban Cell Ship Specification, p. 3
  • Suliban Cell Ship, pp. 4-9
  • Designing The Suliban Cell Ship, pp. 10-17
  • On Screen, p. 18
Eaglemoss Suliban Cell Ship 60 mm³ 1:54
95 Star Trek Official Starships Collection issue 95 New Orleans Class (USS Kyushu)

30/03/2017

  • Contents, p. 2
  • New Orleans Class Specification, p. 3
  • New Orleans Class, pp. 4-9
  • (Designing The) New Orleans Class, pp. 10-11
  • Michael Piller On The Best of Both Worlds, pp. 12-17
  • On Screen, p. 18
Eaglemoss New Orleans Class USS Kyushu 125 mm 1:2720
96 Star Trek Official Starships Collection issue 96 Orion Scout Ship

13/04/2017

  • Contents, p. 2
  • Orion Scout Ship Specification, p. 3
  • Orion Scout Ship, pp. 4-9
  • Designing The Orion Ship, pp. 10-11
  • D.C. Fontana, Spock And The Vulcans, pp. 12-17
  • On Screen, p. 18
Eaglemoss Orion Scout Ship model 61 mm 1:1803
97 Star Trek Official Starships Collection issue 97 Starfleet Academy Flight Training Craft [16]

27/04/2017

  • Contents, p. 2
  • Flight Training Craft Specification, p. 3
  • Starfleet Academy Flight Training Craft, pp. 4-9
  • Designing The Academy Flight Training Craft, pp. 10-11
  • Wil Wheaton On Wesley Crusher, pp. 12-17
  • On Screen, p. 18
Star Trek Official Starships Collection Academy Flight Trainer v2 110 mm 1:100
98 Star Trek Official Starships Collection issue 98 USS Rhode Island NCC-72701

11/05/2017

  • Contents, p. 2
  • USS Rhode Island NCC-72701 Specification, p. 3
  • USS Rhode Island NCC-72701, pp. 4-9
  • Designing The Rhode Island, pp. 10-11
  • An Inside Look At 'Unimatrix Zero', pp. 12-17
  • On Screen, p. 18
Eaglemoss USS Rhode Island 135 mm 1:1644
99 Star Trek Official Starships Collection issue 99 Assimilated Arctic One

25/05/2017

  • Contents, p. 2
  • Assimilated Arctic One Specification, p. 3
  • Assimilated Arctic One, pp. 4-9
  • Designing The Arctic Explorer, pp. 10-11
  • How The Borg Ended Up On Enterprise, pp. 12-17
  • On Screen, p. 18
Eaglemoss Arctic Explorer 127 mm 1:630
100 Star Trek Official Starships Collection issue 100 Daedalus Class (USS Horizon)

08/06/2017

  • Contents, p. 2
  • Daedalus Class Specification, p. 3
  • Daedalus Class, pp. 4-9
  • Designing The Daedalus Class, pp. 10-11
  • The Star Trek History Of Space Exploration, pp. 12-17
  • On Screen, p. 18
Eaglemoss Daedalus Class USS Horizon 140 mm 1:1000
101 Star Trek Official Starships Collection issue 101 Bajoran Freighter

22/06/2017

  • Contents, p. 2
  • Bajoran Freighter Specification, p. 3
  • Bajoran Freighter, pp. 4-9
  • The Hardest Working Model In Star Trek, pp. 10-11
  • Creating Star Trek: Deep Space Nine, pp. 12-17
  • On Screen, p. 18
Eaglemoss Bajoran Antares Class Freighter 134 mm 1:1866
102 Star Trek Official Starships Collection issue 102 Klingon D5-Class Battle Cruiser

06/07/2017

  • Contents, p. 2
  • Klingon D5 Battle Cruiser Specification, p. 3
  • Klingon D5 Battle Cruiser, pp. 4-9
  • Designing The Klingon D5, pp. 10-11
  • Klingon History, pp. 12-17
  • On Screen, p. 18
Eaglemoss 102 Klingon D5 Class 120 mm 1:1292
103 Star Trek Official Starships Collection issue 103 Vidiian Warship

20/07/2017

  • Contents, p. 2
  • Vidiian Warship Specification, p. 3
  • Vidiian Warship, pp. 4-9
  • Designing The Vidiian Warship, pp. 10-11
  • Behind The Scenes: Star Trek Makeup, pp. 12-17
  • On Screen, p. 18
Star Trek Official Starships Collection Vidiian Warship 110 mm
117 mm w
1:2727
104 Star Trek Official Starships Collection issue 104 USS Jenolan NCC-2010

03/08/2017

  • Contents, p. 2
  • USS Jenolan NCC-2010 Specification, p. 3
  • USS Jenolan NCC-2010, pp. 4-9
  • Designing The USS Jenolan, pp. 10-11
  • Behind The Scenes: James Doohan, pp. 12-17
  • On Screen, p. 18
Eaglemoss 104 USS Jenolan 126 mm 1:1865
105 Star Trek Official Starships Collection issue 105 Smuggler's Ship

17/08/2017

  • Contents, p. 2
  • Smuggler's Ship Specification, p. 3
  • Smuggler's Ship, pp. 4-9
  • Creating The Smuggler's Ship, pp. 10-11
  • The Making Of Unification I, pp. 12-17
  • On Screen, p. 18
Eaglemoss 105 Smugglers Ship 129 mm 1:3876
106 Star Trek Official Starships Collection issue 106 Kazon Raider

31/08/2017

  • Contents, p. 2
  • Kazon Raider Specification, p. 3
  • Kazon Raider, pp. 4-9
  • Designing The Kazon Raider, pp. 10-13
  • Creating The Kazon, pp. 14-17
  • On Screen, p. 18
Eaglemoss 106 Kazon Raider 102 mm 1:1569
107 Star Trek Official Starships Collection issue 107 Klingon Bird-of-Prey (Attack Position)

14/09/2017

Eaglemoss 107 Klingon Bird-of-Prey Attack Position 88 mm
101 mm w
1:1580
108 Star Trek Official Starships Collection issue 108 Cheyenne Class (USS Ahwahnee)

28/09/2017

Eaglemoss USS Ahwahnee 120 mm 1:3017
109 Star Trek Official Starships Collection issue 109 Borg Queen's Ship

12/10/2017

  • Contents, p. 2
  • Borg Queen's Ship Specification, p. 3
  • Borg Queen's Ship, pp. 4-9
  • Designing The Borg Queen's Ship, pp. 10-11
  • USS Voyager's Journey Home, pp. 12-17
  • On Screen, p. 18
Eaglemoss 109 Borg Queens Vessel 85 mm
92 mm h
1:9652 [17]
110 Star Trek Official Starships Collection issue 110 Springfield Class (USS Chekov)

26/10/2017

  • Contents, p. 2
  • Springfield Class Specification, p. 3
  • Starfleet Springfield Class, pp. 4-7
  • Little Known Ships Of Star Trek, pp. 8-11
  • Rick Sternbach Star Trek Illustrator, pp. 12-17
  • On Screen, p. 18
Eaglemoss Springfield Class USS Chekov 125 mm 1:2600
111 Star Trek Official Starships Collection issue 111 Captain Proton's Rocket Ship

09/11/2017

  • Contents, p. 2
  • Captain Proton's Rocket Ship Specification, p. 3
  • Captain Proton's Rocket Ship, pp. 4-9
  • Designing Captain Proton's Rocket Ship, pp. 10-11
  • Creating The Weaponry For Captain Proton, pp. 12-17
  • On Screen, p. 18
Eaglemoss 111 Captain Protons Rocket Ship 120 mm 1:175
112 Star Trek Official Starships Collection issue 112 USS Phoenix NCC-65420

23/11/2017

  • Contents, p. 2
  • USS Phoenix NCC-65420 Specification, p. 3
  • USS Phoenix NCC-65420, pp. 4-9
  • Production Design Season Four, pp. 10-11
  • The Next Generation Fourth Season, pp. 12-17
  • On Screen, p. 18
Eaglemoss USS Phoenix 110 mm 1:4277
113 Star Trek Official Starships Collection issue 113 Lokirrim Warship

07/12/2017

Eaglemoss Lokirrim Warship 140 mm 1:1286
114 Star Trek Official Starships Collection issue 114 Challenger Class (USS Buran)

21/12/2017

  • Contents, p. 2
  • Challenger Class Specification, p. 3
  • Starfleet Challenger Class, pp. 4-7
  • Borg Timeline, pp. 8-11
  • Star Trek: The Next Generation Fourth Season Makeup, pp. 12-17
  • On Screen, p. 18
Eaglemoss USS Buran 110 mm 1:3545
2018
115 Star Trek Official Starships Collection issue 115 Tellarite Cruiser

04/01/2018

  • Contents, p. 2
  • Tellarite Cruiser Specification, p. 3
  • Tellarite Cruiser, pp. 4-9
  • Designing The Tellarite Cruiser, pp. 10-13
  • Tellarite Appearances, pp. 14-17
  • On Screen, p. 18
Eaglemoss 115 Tellarite Cruiser 116 mm 1:1724
116 Star Trek Official Starships Collection issue 116 USS Curry

18/01/2018

  • Contents, p. 2
  • USS Curry Specification, p. 3
  • USS Curry NCC-42254, pp. 4-9
  • Building The USS Curry NCC-42254, pp. 10-11
  • Star Trek's Special Effects Guru Dan Curry, pp. 12-17
  • On Screen, p. 18
Eaglemoss USS Curry 120 mm 1:3167
117 Star Trek Official Starships Collection issue 117 22nd-Century Ferengi Starship

01/02/2018

  • Contents, p. 2
  • 22nd-Century Ferengi Starship Specification, p. 3
  • 22nd-Century Ferengi Starship, pp. 4-9
  • Designing The 22nd Century Ferengi Ship, pp. 10-11
  • The Ferengi On Enterprise, pp. 12-17
  • On Screen, p. 18
Eaglemoss 117 22nd C Ferengi Starship 105 mm 1:524
118 Star Trek Official Starships Collection issue 118 Freedom Class (USS Firebrand)

15/02/2018

  • Contents, p. 2
  • Freedom Class Specification, p. 3
  • Starfleet Freedom Class, pp. 4-7
  • Ronald D. Moore On TNG's 4th Season, pp. 8-11
  • Michael Piller On The Next Generation, pp. 12-17
  • On Screen, p. 18
Eaglemoss 118 Freedom Class 120 mm 1:3583
119 Star Trek Official Starships Collection issue 119 Hirogen Holoship

01/03/2018

  • Contents, p. 2
  • Hirogen Holoship Specification, p. 3
  • Hirogen Holoship, pp. 4-9
  • Creating The Hirogen Costumes, pp. 10-11
  • Writer Bryan Fuller On Star Trek: Voyager, pp. 12-17
  • On Screen, p. 18
Eaglemoss Hirogen Holoship 140 mm 1:1429
120 Star Trek Official Starships Collection issue 120 USS Bozeman NCC-1941

15/03/2018

Eaglemoss 120 USS Bozeman 118 mm 1:2059
121 Star Trek Official Starships Collection issue 121 SS Xhosa

29/03/2018

Eaglemoss 121 SS Xhosa 140 mm 1:1929
122 Star Trek Official Starships Collection issue 122 USS Yeager NCC-65674

12/04/2018

  • Contents, p. 2
  • USS Yeager NCC-65674 Specification, p. 3
  • USS Yeager NCC-65674, pp. 4-9
  • Building The USS Yeager NCC-65674, pp. 10-11
  • Hans Beimler On Deep Space Nine, pp. 12-17
  • On Screen, p. 18
Eaglemoss USS Yeager 125 mm 1:3217
123 Star Trek Official Starships Collection issue 123 Romulan Science Vessel

26/04/2018

  • Contents, p. 2
  • Romulan Science Vessel Specification, p. 3
  • Romulan Science Vessel, pp. 4-9
  • Creating The Romulan Science Vessel, pp. 10-11
  • Rick Sternbach On Romulan Vessels, pp. 12-17
  • On Screen, p. 18
Eaglemoss 123 Romulan Science Ship 128 mm 1:2344
124 Star Trek Official Starships Collection issue 124 SS Emmette

10/05/2018

  • Contents, p. 2
  • SS Emmette Specification, p. 3
  • SS Emmette, pp. 4-7
  • Designing The SS Emmette, pp. 8-11
  • The Opening Titles Of Enterprise, pp. 12-17
  • On Screen, p. 18
Eaglemoss 124 SS Emmette 102 mm 1:1275
125 Star Trek Official Starships Collection issue 125 Alice

26/05/2018

  • Contents, p. 2
  • Alice Specification, p. 3
  • Alice, pp. 4-9
  • Designing Alice, pp. 10-11
  • Star Trek: Voyager Season Six Visual Effects, pp. 12-17
  • On Screen, p. 18
Eaglemoss 125 Alice 95 mm 1:53
126 Star Trek Official Starships Collection issue 126 Niagara Class (USS Princeton)

07/06/2018

  • Contents, p. 2
  • Niagara Class Specification, p. 3
  • Starfleet Niagara Class, pp. 4-9
  • Building The Niagara Class, pp. 10-11
  • Ira Steven Behr On The Next Generation, pp. 12-17
  • On Screen, p. 18
Eaglemoss 126 USS Princeton 130 mm 1:4346
127 Star Trek Official Starships Collection issue 127 Eymorg Starship

21/06/2018

  • Contents, p. 2
  • Eymorg Starship Specification, p. 3
  • Eymorg Starship, pp. 4-9
  • Designing The Eymorg Starship, pp. 10-11
  • TOS Producer Gene L. Coon, pp. 12-17
  • On Screen, p. 18
Eaglemoss 127 Eymorg starship 49 mm
69 mm w
1:204 [18]
128 Star Trek Official Starships Collection issue 128 OV-165

05/07/2018

  • Contents, p. 2
  • OV-165 Specification, p. 3
  • OV-165, pp. 4-7
  • Designing The OV-165, pp. 8-11
  • Visual Effects 'Broken Bow', pp. 12-17
  • On Screen, p. 18
Eaglemoss 128 OV-165 130 mm 1:308
129 Star Trek Official Starships Collection issue 129 Tholian Starship (2268)

19/07/2018

  • Contents, p. 2
  • Tholian Starship Specification, p. 3
  • Tholian Starship (23rd Century) pp. 4-7
  • Designing The Tholian Ship, pp. 10-13
  • Star Trek At The Smithsonian, pp. 14-17
  • On Screen, p. 18
Eaglemoss 129 Tholian Starship 23rd C 110 mm 1:136
130 Star Trek Official Starships Collection issue 130 Borg Probe

02/08/2018

  • Contents, p. 2
  • Borg Probe Specification, p. 3
  • Borg Probe, pp. 4-9
  • Designing The Borg Probe, pp. 10-13
  • Star Trek Director Cliff Bole, pp. 14-17
  • On Screen, p. 18
Eaglemoss 130 Borg Probe 107 mm 1:1682
131 Star Trek Official Starships Collection issue 131 United Earth Arctic One

16/08/2018

  • Contents, p. 2
  • United Earth Arctic One Specification, p. 3
  • United Earth Arctic One, pp. 4-7
  • Writer Mike Sussman On 'Regeneration', pp. 8-11
  • Creating The Borg Costumes, pp. 12-17
  • On Screen, p. 18
Eaglemoss 131 Arctic One 125 mm 1:640 [19]
132 Star Trek Official Starships Collection issue 132 Warship Voyager

30/08/2018

  • Contents, p. 2
  • Warship Voyager Specification, p. 3
  • Warship Voyager, pp. 4-9
  • Designing The Warship Voyager, pp. 10-13
  • Tim Russ On Directing 'Living Witness', pp. 14-17
  • On Screen, p. 18
Eaglemoss 132 Warship Voyager 136 mm 1:2559 [20]
133 Star Trek Official Starships Collection issue 133 Irina's Racing Ship

13/09/2018

  • Contents, p. 2
  • Irina’s Racing Ship Specification, p. 3
  • Irina’s Racing Ship, pp. 4-9
  • Designing Irina’s Racing Ship, pp. 10-11
  • The Writers On Voyager's Final Season, pp. 12-17
  • On Screen, p. 18
Eaglemoss 133 Irinas Ship 99 mm 1:202
134 Star Trek Official Starships Collection issue 134 Vulcan Survey Ship (1957)

27/09/2018

  • Contents, p. 2
  • Vulcan Survey Ship Specification, p. 3
  • Vulcan Survey Ship, pp. 4-9
  • Designing The Vulcan Survey Ship, pp. 10-11
  • The Writers On Enterprise's Second Season, pp. 12-17
  • On Screen, p. 18
Eaglemoss 134 Vulcan Survey Ship 139 mm 1:185
135 Star Trek Official Starships Collection issue 135 Dala's 'Delta Flyer'

11/10/2018

  • Contents, p. 2
  • Dala's 'Delta Flyer' Specification, p. 3
  • Dala's 'Delta Flyer', pp. 4-9
  • Designing Dala's 'Delta Flyer', pp. 10-11
  • Star Trek: Voyager Season Six Visual Effects, pp. 12-17
  • On Screen, p. 18
Eaglemoss 135 Dala's Ship 125 mm 1:240
136 Star Trek Official Starships Collection issue 136 Cardassian Keldon Class

25/10/2018

  • Contents, p. 2
  • Keldon Class Specification, p. 3
  • Cardassian Keldon Class, pp. 4-9
  • Keldon Class vs Galor Class Comparison, pp. 10-11
  • Star Trek: Deep Space Nine The Dominion Arc, pp. 12-17
  • On Screen, p. 18
Eaglemoss 136 Cardassian Keldon Class 139 mm 1:2675
137 Star Trek Official Starships Collection issue 137 Xindi-Primate Starship

08/11/2018

  • Contents, p. 2
  • Xindi-Primate Starship Specification, p. 3
  • Xindi-Primate Starship, pp. 4-9
  • Designing The Xindi-Primate Starship, pp. 10-13
  • Star Trek: Enterprise The Xindi Arc, pp. 14-17
  • On Screen, p. 18
Eaglemoss 137 Xindi-Humanoid Ship 140 mm 1:1429
138 Star Trek Official Starships Collection issue 138 USS Lantree NCC-1837

22/11/2018

  • Contents, p. 2
  • USS Lantree NCC-1837 Specification, p. 3
  • USS Lantree NCC-1837, pp. 4-9
  • Creating The USS Lantree NCC-1837, pp. 10-11
  • Star Trek: The Next Generation Season 2, pp. 12-17
  • Onscreen, p. 18
Eaglemoss 138 USS Lantree 115 mm 1:2113
139 Star Trek Official Starships Collection issue 139 Vaadwaur Assault Fighter

06/12/2018

  • Contents, p. 2
  • Vaadwaur Assault Fighter Specification, p. 3
  • Vaadwaur Assault Fighter, pp. 4-9
  • Designing The Vaadwaur Fighter & City, pp. 10-11
  • Star Trek: Voyager Season Six Visual Effects, pp. 12-17
  • Onscreen, p. 18
Eaglemoss 139 Vaadwaur Fighter 115 mm 1:609 [21]
140 Star Trek Official Starships Collection issue 140 Federation Tug

20/12/2018

  • Contents, p. 2
  • Federation Tug Specification, p. 3
  • Federation Tug, pp. 4-7
  • Building The Federation Tug, pp. 8-9
  • Designing The Ketracel-white Facility, pp. 10-11
  • Doug Drexler: Scenic Artist, pp. 12-17
  • On Screen, p. 18
Eaglemoss 140 Starfleet Tug 90 mm 1:1000 [22]
2019
141 Star Trek Official Starships Collection issue 141 Vulcan T'Pau

03/01/2019

  • Contents, p. 2
  • Vulcan T'Pau Specification, p. 3
  • Vulcan T'Pau, pp. 4-9
  • Designing The T'Pau, pp. 10-11
  • The Next Generation: Season Five Production Design, pp. 12-17
  • On Screen, p. 18
Eaglemoss 141 Vulcan T'pau 134 mm 1:1063 [23]
142 Star Trek Official Starships Collection issue 142 Promellian Battle Cruisera

17/01/2019

  • Contents, p. 2
  • Promellian Battle Cruiser Specification, p. 3
  • Promellian Battle Cruiser, pp. 4-9
  • Building The Promellian Battle Cruiser, pp. 10-11
  • The Next Generation: Season Three Production Design, pp. 12-17
  • On Screen, p. 18
Eaglemoss 142 Promellian Battle Cruiser 142 mm 1:4225
143 Star Trek Official Starships Collection issue 143 Merchantman

31/01/2019

  • Contents, p. 2
  • Merchantman Specification, p. 3
  • Merchantman, pp. 4-7
  • Designing The Merchantman, pp. 8-9
  • Star Trek III Visual Effects, pp. 10-17
  • On Screen, p. 18
Eaglemoss 143 Merchantman 135 mm 1:1111
144 Star Trek Official Starships Collection issue 144 Gomtuu

14/02/2019

  • Contents, p. 2
  • Gomtuu Specification, p. 3
  • Gomtuu, pp. 4-9
  • Designing Gomtuu, pp. 10-11
  • Star Trek: TNG Season Three Costume Design, pp. 12-17
  • On Screen, p. 18
Eaglemoss 144 Tin Man 112 mm 1:5882
145 Star Trek Official Starships Collection issue 145 Nightingale

28/02/2019

  • Contents, p. 2
  • Nightingale Specification, p. 3
  • Nightingale, pp. 4-9
  • Designing The Nightingale, pp. 10-11
  • Garrett Wang On Harry Kim, pp. 12-18
  • On Screen, p. 19
Eaglemoss 145 Nightingale 91 mm 1:3516
146 Star Trek Official Starships Collection issue 146 Fesarius

14/03/2019

  • Contents, p. 2
  • Fesarius Specification, p. 3
  • Fesarius, pp. 4-9
  • Designing The Fesarius, pp. 10-11
  • Matt Jefferies: Inside The USS Enterprise, pp. 12-18
  • On Screen, p. 19
Eaglemoss 146 Fesarius 62 mm ø 1:33548 [24]
147 Star Trek Official Starships Collection issue 147 Baran's Raider

28/03/2019

  • Baran's Raider Specification, p. 2
  • Contents, p. 3
  • Baran's Raider, pp. 4-9
  • Designing Baran's Raider, pp. 10-11
  • Star Trek Producer Peter Lauritson, pp. 12-18
  • On Screen, p. 19
Eaglemoss 147 Baran's Raider 96 mm 1:2292
148 Star Trek Official Starships Collection issue 148 Jem'Hadar Battleship

11/04/2019

  • Contents, p. 2
  • Jem'Hadar Battleship Specification, p. 3
  • Jem'Hadar Battleship, pp. 4-9
  • Designing The Jem'Hadar Battleship, pp. 10-11
  • Aron Eisenberg On Playing Deep Space Nine's Nog, pp. 12-18
  • On Screen, p. 19
Eaglemoss 148 Dominion Battleship 108 mm 1:13889
149 Star Trek Official Starships Collection issue 149 Krenim Warship

25/04/2019

  • Contents, p. 2
  • Krenim Warship Specification, p. 3
  • Krenim Warship, pp. 4-9
  • Designing The Krenim Warship, pp. 10-11
  • Shows That 'Unhappened', pp. 12-17
  • On Screen, p. 18
Eaglemoss 149 Krenim Warship 122 mm 1:4098
150 Star Trek Official Starships Collection issue 150 USS Antares NCC-9844

09/05/2019

  • Contents, p. 2
  • USS Antares Specification, p. 3
  • USS Antares NCC-9844, pp. 4-9
  • Design Mystery, pp. 10-11
  • Chase Masterson, pp. 12-17
  • On Screen, p. 18
Eaglemoss USS Antares NCC-9844 115 mm 1:2113
151 Star Trek Official Starships Collection issue 151 B'omar Patrol Ship

23/05/2019

  • Contents, p. 2
  • B'omar Patrol Ship Specification, p. 3
  • B'omar Patrol Ship, pp. 4-9
  • Designing The B'omar Patrol Ship, pp. 10-11
Eaglemoss 151 B'omar Patrol Ship 100 mm 1:140
152 Star Trek Official Starships Collection issue 152 USS Excelsior Nilo Rodis Concept I

06/06/2019

  • Contents, p. 2
  • USS Excelsior Nilo Rodis Concept I Specification, p. 3
  • USS Excelsior Nilo Rodis Concept I, pp. 4-7
  • Designing The USS Excelsior, pp. 8-9
  • The Great Experiment, pp. 10-17
  • On Screen, p. 18
Eaglemoss 152 USS Excelsior Prototype Mk I 136 mm 1:3434 [25]
153 Star Trek Official Starships Collection issue 153 Devore Warship

20/06/2019

  • Contents, p. 2
  • Devore Warship Specification, p. 3
  • Devore Warship, pp. 4-9
  • Designing The Devore Warship, pp. 10-11
  • The Making Of Counterpoint, pp. 12-17
  • On Screen, p. 18
Eaglemoss 153 Devore Warship 122 mm 1:6557
154 Star Trek Official Starships Collection issue 154 Klingon Transport

04/07/2019

  • Contents, p. 2
  • Klingon Transport Specification, p. 3
  • Klingon Transport, pp. 4-9
  • Designing The Klingon Transport, pp. 10-11
  • Goodman's Trial, pp. 12-17
  • On Screen, p. 18
Eaglemoss 154 Klingon Rebel Transport 120 mm 1:458
155 Star Trek Official Starships Collection issue 155 Vulcan Survey Vessel D'Vahl

18/07/2019

  • Contents, p. 2
  • Vulcan Survey Vessel D'Vahl Specification, p. 3
  • Vulcan Survey Vessel D'Vahl, pp. 4-9
  • Vulcan Fleet Listings, pp. 10-11
  • Adventures In History, pp. 12-17
  • On Screen, p. 18
Eaglemoss 155 Vulcan D'Vahl 130 mm 1:231 [26]
156 Star Trek Official Starships Collection issue 156 USS Melbourne Nebula Class [27]

01/08/2019

  • Contents, p. 2
  • USS Melbourne Nebula Class Specification, p. 3
  • USS Melbourne NCC-62043, pp. 4-9
  • Ed Miarecki, pp. 10-11
  • Ed Miarecki Design Highlights, pp. 12-13
  • Rules Of Engagement, pp. 14-17
  • On Screen, p. 18
Eaglemoss 156 USS Melbourne Nebula Class 116 mm 1:3810 [28]
157 Star Trek Official Starships Collection issue 157 Cardassian Freighter Groumall

15/08/2019

  • Contents, p. 2
  • Cardassian Freighter Groumall Specification, p. 3
  • Cardassian Freighter Groumall, pp. 4-9
  • Designing The Groumall, pp. 10-13
  • The Rise Of Damar, pp. 14-17
  • On Screen, p. 18
Eaglemoss 157 The Groumall 129 mm 1:1984
158 Star Trek Official Starships Collection issue 158 USS Excelsior Nilo Rodis Concept II

29/08/2019

  • Contents, p. 2
  • USS Excelsior Nilo Rodis Concept II Specification, p. 3
  • USS Excelsior Nilo Rodis Concept II, pp. 4-7
  • Designing The Excelsior: Concept II, pp. 8-9
  • Nilo Rodis-Jamero, pp. 10-11
  • Design Highlights Nilo Rodis-Jamero, pp. 12-17
  • On Screen, p. 18
Eaglemoss 158 USS Excelsior Nilo Rodis Concept II 136 mm 1:3434 [29]
159 Star Trek Official Starships Collection issue 159 Batris

12/09/2019

  • Contents, p. 2
  • Batris Specification, p. 3
  • Batris, pp. 4-9
  • The Klingons Resurrected, pp. 10-11
  • Maurice Hurley On The Early Seasons Of The Next Generation, pp. 12-17
  • On Screen, p. 18
Eaglemoss 159 Batris 140 mm 1:2071
160 Star Trek Official Starships Collection issue 160 United Earth Sarajevo

26/09/2019

  • Contents, p. 2
  • Sarajevo Specification, p. 3
  • United Earth Sarajevo, pp. 4-7
  • Designing The Sarajevo, pp. 8-9
  • Star Trek: Enterprise Season Four, pp. 10-17
  • On Screen, p. 18
Eaglemoss 160 Earth Starship Sarajevo 135 mm 1:1481
161 Star Trek Official Starships Collection issue 161 Void Ship

11/10/2019

  • Contents, p. 2
  • Void Ship Specification, p. 3
  • Void Ship, pp. 4-9
  • Designing The Void Ship, pp. 10-13
  • Into Darkness, pp. 14-17
  • On Screen, p. 18
Eaglemoss 161 Void Ship 95 mm
100 mm h
1:843
162 Star Trek Official Starships Collection issue 162 SS Lakul NFT-7793

25/10/2019

  • Contents, p. 2
  • SS Lakul NFT-7793 Specification, p. 3
  • Federation SS Lakul, pp. 4-9
  • Designing The SS Lakul, pp. 10-15
  • Star Trek: Generations Stellar Cartography, pp. 16-17
  • On Screen, p. 18
Eaglemoss SS Lakul 108 mm 1:2500
163 Star Trek Official Starships Collection issue 163 Orion Interceptor

08/11/2019

  • Contents, p. 2
  • Orion Interceptor Specification, p. 3
  • Orion Interceptor, pp. 4-9
  • Designing The Orion Interceptor, pp. 10-17
  • On Screen, p. 18
Eaglemoss 163 Orion Interceptor 109 mm 1:1376 [30]
164 Star Trek Official Starships Collection issue 164 USS Excelsior Nilo Rodis Concept III

22/11/2019

  • Contents, p. 2
  • USS Excelsior Nilo Rodis Concept III Specification, p. 3
  • USS Excelsior Nilo Rodis Concept III, pp. 4-7
  • Designing The Excelsior Concept III, pp. 8-9
  • Design Profile David Carson, pp. 10-17
  • On Screen, p. 18
Eaglemoss 164 USS Excelsior Nilo Rodis Concept III 135 mm 1:3459 [31]
165 Star Trek Official Starships Collection issue 165 Karemma Starship

05/12/2019

  • Contents, p. 2
  • Karemma Starship Specification, p. 3
  • Karemma Starship, pp. 4-9
  • Designing The Karemma Starship, pp. 10-11
  • Sink The Defiant!, pp. 12-17
  • On Screen, p. 18
Eaglemoss 165 Karemma Starship 129 mm 1:2946 [32]
166 Star Trek Official Starships Collection issue 166 Tamarian Deep Space Cruiser [33]

19/12/2019

  • Contents, p. 2
  • Tamarian Deep Space Cruiser Specification, p. 3
  • Tamarian Deep Space Cruiser, pp. 4-9
  • Designing The Tamarian Cruiser, pp. 10-11
  • Joe Menosky On Writing For The Next Generation, pp. 12-17
  • On Screen, p. 18
Eaglemoss 166 Tamarian Deep Space Cruiser 110 mm 1:6364
2020
167 Star Trek Official Starships Collection issue 167 Axanar Cargo Ship

02/01/2020

  • Contents, p. 2
  • Axanar Cargo Ship Specification, p. 3
  • Axanar Cargo Ship, pp. 4-9
  • Designing The Axanar Cargo Ship, pp. 10-13
  • First Contacts, pp. 14-17
  • On Screen, p. 18
Eaglemoss 167 Axanar Freighter 129 mm 1:713
168 Star Trek Official Starships Collection issue 168 Suliban Freighter

16/01/2020

  • Contents, p. 2
  • Suliban Freighter Specification, p. 3
  • Suliban Freighter, pp. 4-7
  • Designing The Suliban Freighter, pp. 8-11
  • Future Tense, pp. 12-17
  • On Screen, p. 18
Eaglemoss 168 Suliban Cargo Ship 129 mm 1:426
169 Star Trek Official Starships Collection issue 169 Kes' Shuttle

30/01/2020

Eaglemoss 169 Kes' Starship 108 mm 1:278 [35]
170 Star Trek Official Starships Collection issue 170 Tsunkatse Arena Ship

13/02/2020

  • Contents, p. 2
  • Tsunkatse Arena Ship Specification, p. 3
  • Tsunkatse Arena Ship, pp. 4-9
  • Designing The Tsunkatse Arena Ship, pp. 10-11
  • Star Trek: Voyager Writer Robert J. Doherty, pp. 12-17
  • On Screen, p19
Eaglemoss 170 Tsunkatse Arena-Ship 135 mm 1:5264
171 Star Trek Official Starships Collection issue 171 Denobulan Medical Ship

27/02/2020

  • Contents, p. 2
  • Denobulan Medical Ship Specification, p. 3
  • Denobulan Medical Ship, pp. 4-9
  • Designing The Denobulan Medical Ship, pp. 10-13
  • Augmented Reality, pp. 14-17
  • On Screen, p. 18
Eaglemoss 171 Denobulan Medical Ship 110 mm 1:209 [36]
172 Star Trek Official Starships Collection issue 172 Xindi-Insectoid Scout Ship

19/03/2020 (revised)

  • Contents, p. 2
  • Xindi-Insectoid Scout Ship Specification, p. 3
  • Xindi-Insectoid Scout Ship, pp. 4-9
  • Designing The Xindi-Insectoid Scout, pp. 10-13
  • Hatching 'Hatchery', pp. 14-17
  • On Screen, p. 18
Eaglemoss 172 Xindi Insectoid Scout Ship 125 mm 1:1120 [37]
173 Star Trek Official Starships Collection issue 173 Arcos

09/04/2020 (rev)

  • Contents, p. 2
  • Arcos Specification, p. 3
  • Arcos, pp. 4-9
  • Production Design On Legacy, pp. 10-11
  • Denise Crosby On Tasha Yar, pp. 12-17
  • On Screen, p. 18
Eaglemoss 173 Arcos 140 mm 1:2071
174 Star Trek Official Starships Collection issue 174 Archer's Toy Ship

30/04/2020 (rev)

  • Contents, p. 2
  • Archer's Toy Ship Specification, p. 3
  • Archer's Toy Ship, pp. 4-9
  • Designing Archer's Toy Ship, pp. 10-15
  • Design Profile Jim Martin, pp. 16-17
  • On Screen, p. 18
Eaglemoss 174 Archer's Toy Ship 90 mm
114 mm w
1:6 [38]
175 Star Trek Official Starships Collection issue 175 Mondor

21/05/2020 (rev)

Eaglemoss 175 Mondor 134 mm 1:2164
176 Star Trek Official Starships Collection issue 176 Tarellian Starship

11/06/2020 (rev)

  • Contents, p. 2
  • Tarellian Starship Specification, p. 3
  • Tarellian Starship, pp. 4-9
  • Designing The Tarellian Ship, pp. 10-13
  • Making 'Haven', pp. 14-18
  • On Screen, p. 19
Eaglemoss Tarellian Starship 130 mm 1:4308
177 Star Trek Official Starships Collection issue 177 Sheliak Colony Ship

02/07/2020 (rev)

Eaglemoss 177 Sheliak Colony Ship 135 mm 1:3481
178 Star Trek Official Starships Collection issue 178 Husnock Warship

16/07/2020 (rev)

  • Contents, p. 2
  • Husnock Warship Specification, p. 3
  • Husnock Warship, pp. 4-9
  • Location Shooting On 'The Survivors', pp. 10-11
  • Hans Beimler On The Next Generation, pp. 12-17
  • On Screen, p. 18
Eaglemoss 178 Husnock Warship 130 mm 1:10000
179 Star Trek Official Starships Collection issue 179 Vidiian Starship

23/07/2020 (rev)

  • Contents, p. 2
  • Vidiian Starship Specification, p. 3
  • Vidiian Starship, pp. 4-9
  • Designing The Vidiian Starship, pp. 10-13
  • Making 'Deadlock', pp. 14-17
  • On Screen, p. 18
Eaglemoss 179 Vidiian Starship 100 mm 1:5000 [39]
180 Star Trek Official Starships Collection issue 180 Borg Cube First Contact

06/08/2020 (rev)

  • Contents, p. 2
  • Borg Cube (First Contact) Specification, p. 3
  • Borg Cube, pp. 4-9
  • Designing The Borg Cube For First Contact, pp. 10-15
  • Creating Borg Technology, pp. 16-17
  • On Screen, p. 18
Eaglemoss 180 Borg Cube Star Trek First Contact 62 mm³ 1:48984

Bonus Edition issues[]

Official Starships Collection Bonus Editions logo

Bonus Edition issues commonly feature registry variants, concept designs, model ships, ships seen only on background displays, and other designs originating from comics, novels, Star Trek Online, and Ships of the Line calendars, and these often as "extended/soft canon" referred to starships were initially released in similar vein as the regular Standard Edition. The accompanying magazine is in contents similar to the Standard Edition magazines. The early SS Yorktown (first "convention exclusive") and Future USS Enterprise-D (subscription gift item) releases though, were issued in the "Standard Edition" packaging without magazines. Like the Special Editions, a number have been created in close consultation with the production artists who conceived the ships' original designs.

Star Trek Official Starships Collection USS Defiant NX-74205 cloaked repack 12(a)

Cloaked USS Defiant in convention box packaging

Those Bonus Editions models selected for convention purposes, were repackaged in redesigned "display boxes" like the one pictured on the right, with the same magazines that came with the Standard Edition, but downsized to 145 × 183 mm in order to fit within the box. Introduced in 2018 for the Collector's Edition, this packaging format became the norm for the Bonus Edition after the cessation of the regular Standard Edition two years later. No binder has been provided for the deviant magazine format by the company while it was in business. This Bonus/Collector's Edition format also became the regular format of choice for the later Star Trek Online Starships Collection spin-off publication, and where a binder for the deviant magazine format was made available.

Some vessels bear Terran Empire liveries and parts (as seen in the mirror universe), while the Federation fleet seen in the Kelvin Timeline was added to the Bonus Edition releases in 2021, following later adjustments to licensing with CBS.[40]

It was the Bonus Edition that became the replacement format for the (mostly "canon") regular Standard Edition and was meant to yet release "some of the big deal missing ships we haven't got to" left over from that edition, [97] after it had concluded its run in the UK during 2020. The models in the Standard Edition size range (about four to six inches long), commonly debuted at Eaglemoss' Hero Collector convention booths – explaining the choice for the display box packaging – , and became afterwards available as "webshop exclusives". The August 2022 Eaglemoss bankruptcy had cut the intended release run short though.

2013 | 2015 | 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | 2023
No.[41] Cover Title/Contents Model Lng* Scale
2013
(N/A) Eaglemoss Future USS Enterprise-D AGT box Future USS Enterprise NCC-1701-D ("All Good Things...")

28/11/2013[42]

Eaglemoss Future USS Enterprise-D AGT gift premium 139 mm 1:4610
2015
M1
(01)
Star Trek Official Starships Collection issue MU-1 ISS Enterprise

18/11/2015

  • Contents, p. 2
  • ISS Enterprise Specification, p. 3
  • ISS Enterprise, pp. 4-7
  • Crew Of The ISS Enterprise, pp. 8-9
  • Filming The ISS Enterprise, pp. 10-11
  • Through The Mirror, pp. 12-15
  • Tiberius Returns, pp. 16-17
  • On Screen, p. 18
Eaglemoss ISS Enterprise TOS 129 mm 1:2240
2016
M2
(02)
Star Trek Official Starships Collection Issue M2 ISS Enterprise NX-01

09/05/2016

  • Contents, p. 2
  • ISS Enterprise Specification, p. 3
  • ISS Enterprise, pp. 4-9
  • Designing The Mirror NX-01, pp. 10-11
  • Dark Mirror, pp. 12-17
  • On Screen, p. 18
Eaglemoss M2 ISS Enterprise NX-01 133 mm 1:1700
(03) Eaglemoss SS Yorktown box SS Yorktown NCC-1717[43]

05/10/2016

Eaglemoss SS Yorktown 129 mm 1:2240
2017
M3
(04)
Star Trek Official Starships Collection issue M3 ISS Defiant NX-74205

31/05/2017

  • Contents, p. 2
  • ISS Defiant NX-74205 Specification, p. 3
  • ISS Defiant NX-74205, pp. 4-11
  • Back Through The Mirror, pp. 12-15
  • Looking In The Mirror, pp. 16-17
  • On Screen, p. 18
Eaglemoss ISS Defiant 110 mm 1:1550
(05) Star Trek Official Starships Collection USS Titan cover USS Titan (β)[44]

31/08/2017

  • Contents, p. 2
  • USS Titan Specification, p. 3
  • USS Titan, pp. 4-7
  • Designing The USS Titan, pp. 8-19
Eaglemoss USS Titan 140 mm 1:3243
(06) Star Trek Official Starships Collection USS Aventine cover USS Aventine (β)[45]

28/09/2017

  • Contents, p. 2
  • USS Aventine Specification, p. 3
  • USS Aventine, pp. 4-7
  • Designing The USS Aventine, pp. 8-13
  • Imagining The USS Aventine, pp. 14-19
Eaglemoss USS Aventine 140 mm 1:4800
(07) Star Trek Official Starships Collection Enterprise-C Probert Concept Special Issue cover (USS) Enterprise NCC-1701-C Probert Concept Special Issue[46]

28/12/2017

  • Contents, p. 2
  • Enterprise NCC-1701-C Probert Concept Specification, p. 3
  • USS Enterprise NCC-1701-C Probert Design, pp. 4-5
  • Grand Designs, pp. 6-19
Eaglemoss USS Enterprise-C Probert concept 140 mm 1:3750[47]
2018
(08) Star Trek Official Starships Collection Phase II USS Enterprise cover USS Enterprise NCC-1701 Phase II Concept

22/01/2018

  • Contents, p. 2
  • USS Enterprise Specification, p. 3
  • USS Enterprise, pp. 4-5
  • Redesigning The Original Enterprise, pp. 6-9
  • Making The Enterprise, pp. 10-11
  • The Lost Vulcan: Xon, pp. 12-17
  • On Screen, p. 18
Eaglemoss Phase II USS Enterprise refit 129 mm 1:2338[48]
(09) Star Trek Official Starships Collection KBoP Landed Position cover Klingon Bird-of-Prey Landed Position

14/09/2018

  • Contents, p. 2
  • Klingon Bird-of-Prey Specification, p. 3
  • Klingon Bird-of-Prey, pp. 4-5
  • Great Bird Of The Galaxy, pp. 6-13
  • Inside The Bird-of-Prey, pp. 14-15
  • Life And Death On Genesis, pp. 16-17
  • The Promised Land, pp. 18-19
Eaglemoss Klingon Bird-of-Prey landed 88 mm
131 mm w
1:1580
(10) Star Trek Official Starships Collection Glow In Dark USS Defiant issue USS Defiant NCC-1764 Special Glow In The Dark Issue[49]

20/10/2018

  • Contents, p. 2
  • USS Defiant Specification, p. 3
  • USS Defiant, pp. 4-7
  • Writing The Tholian Web, pp. 8-11
  • Recreating Classic Sets, pp. 12-17
  • On Screen, p. 18
Eaglemoss USS Defiant NCC-1764 129 mm 1:2240
(11) Star Trek Official Starships Collection USS Voyager Sternbach Concept cover USS Voyager Sternbach Concept Special Issue

25/09/2018

  • Contents, p. 2
  • USS Voyager Sternbach Concept Specification, p. 3
  • USS Voyager (Rejected Concept) The USS Voyager That Never Was, pp. 4-19
Eaglemoss USS Voyager concept 140 mm 1:2721[50]
2019
(12) Star Trek Official Starships Collection USS Bonaventure cover USS Bonaventure NCC-1000 (β) Special Issue[51]

21/01/2019

Eaglemoss Bonaventure class 136 mm 1:1949[52]
(13)
&
(13A)
Star Trek Official Starships Collection USS Enterprise-F Fed Livery cover USS Enterprise NCC-1701-F (β) Federation Livery
04/02/2019
USS Enterprise NCC-1701-F (β) Star Trek Online Livery
19/03/2019[53]
  • Contents, p. 2
  • USS Enterprise NCC-1701-F Specification, p. 3
  • USS Enterprise NCC-1701-F, pp. 4-5
  • Designing The Enterprise-F, pp. 6-15
  • A Tale of Two Timelines Star Trek Online, pp. 16-19
Eaglemoss USS Enterprise NCC-1701-F 135 mm 1:7860
Star Trek Official Starships Collection USS Enterprise-F STO Livery cover Eaglemoss USS Enterprise NCC-1701-F STO version
(14) Star Trek Official Starships Collection USS Altair cover USS Altair (β)

05/08/2019

  • Contents, p. 2
  • USS Altair Specification, p. 3
  • USS Altair, pp 4-7
  • Designing The USS Altair, pp. 8-17
  • Doug Drexler's Voyager Concepts, pp. 18-19
Eaglemoss USS Altair 116 mm 1:2784
(15) Star Trek Official Starships Collection Assimilated USS Voyager cover F Assimilated USS Voyager

05/08/2019

  • Contents, p. 2
  • Assimilated USS Voyager Specification, p. 3
  • Assimilated USS Voyager, pp. 4-7
  • Designing Species 8472, pp. 8-19
Eaglemoss Assimilated USS Voyager 135 mm 1:2541
(16) Star Trek Official Starships Collection USS Defiant NX-74205 Cloaked cover USS Defiant NX-74205 Cloaked[54]

03/10/2019 (US) 25/10/2019 (UK)

  • Contents, p. 2
  • USS Defiant NX-74205 Specification, p. 3
  • USS Defiant, pp. 4-7
  • A History Of Cloaking, pp. 8-17
  • On Screen, p. 18
Eaglemoss Cloaked USS Defiant 108 mm 1:1580
(17) Star Trek Official Starships Collection ISS Enterprise-D cover ISS Enterprise-D (β) Mirror Universe (β) Special Issue

01/04/2019

  • Contents, p. 2
  • ISS Enterprise-D Mirror Universe (Specification), p. 3
  • ISS Enterprise-D, pp. 4-5
  • Adventures In The Mirror Universe, pp. 6-19
Eaglemoss ISS Enterprise NCC-1701-D 139 mm 1:4610
(18) Star Trek Official Starships Collection USS Enterprise Shuttlecraft Jefferies Concept cover USS Enterprise Shuttlecraft Jefferies Concept (TOS) Special Issue

15/10/2019

  • Contents, p. 2
  • Shuttlecraft Specification, p. 3
  • USS Enterprise Shuttlecraft (Rejected Concept), pp. 4-5
  • The USS Enterprise Shuttle That Never Was, pp. 6-19
Eaglemoss Matt Jefferies Concept Shuttle 108 mm 1:68
(19) Star Trek Official Starships Collection USS Enterprise Shuttlecraft Phase II Concept cover USS Enterprise Shuttlecraft Phase II Concept Special Issue

22/10/2019

  • Contents, p. 2
  • Shuttlecraft Specification, p. 3
  • USS Enterprise Shuttlecraft (Phase II Concept), pp. 4-5
  • The Origin Of The Design For The Phase II Shuttle, pp. 6-7
  • My Star Trek Decade, pp. 8-15
  • Star Trek A New Phase, pp. 16-19
Eaglemoss Star Trek Phase II Concept Shuttle 129 mm 1:57
(20) Star Trek Official Starships Collection SS Conestoga cover SS Conestoga

12/12/2019

  • Contents, p. 2
  • SS Conestoga Specification, p. 3
  • SS Conestoga, pp. 4-7
  • Star Trek's Missing Years, pp. 8-13
  • Designing The SS Conestoga, pp. 14-18
Eaglemoss SS Conestoga 135 mm 1:1563[55]
2020
(21) Star Trek Official Starships Collection Klingon D4 Concept cover Concept Klingon D4 Special Issue

16/01/2020

  • Contents, p. 2
  • Concept Klingon D4, pp. 3-5
  • The Klingon Ships Of John Eaves, pp. 6-18
Eaglemoss Klingon D4 Concept 135 mm 1:1174[56]
(22) Star Trek Official Starships Collection Cardassian Orbital Weapons Platform cover Cardassian Orbital Weapons Platform Special Issue

24/01/2020

  • Contents, p. 2
  • Cardassian Orbital Weapons Platform Specification, p. 3
  • Cardassian Orbital Weapons Platform, pp. 4-9
  • Designing The Orbital Weapons Platform, pp. 10-15
  • Arming Deep Space 9, pp. 16-18
Eaglemoss Cardassian Weapons Platform 96 mm ø 1:1250[57]
(23) Star Trek Official Starships Collection Friendship 1 cover Friendship 1

03/02/2020

  • Contents, p. 2
  • Friendship 1 Specification, p. 3
  • Friendship 1, pp. 4-7
  • Designing Friendship 1, pp. 8-13
  • Pierre Drolet, pp. 14-19
Eaglemoss Friendship 1 138 mm 1:145
(24) Star Trek Official Starships Collection USS Reliant Concept cover USS Reliant Concept Special Issue[58]

18/03/2020

  • Contents, p. 2
  • USS Reliant Specification, p. 3
  • USS Reliant (Rejected Concept), p. 4-7
  • Designing The USS Reliant, pp. 8-11
  • Writing Khan, pp. 12-19
Eaglemoss USS Reliant Concept 118 mm 1:2059
(25) Star Trek Official Starships Collection USS Enterprise The Cage cover USS Enterprise 'The Cage' Special Issue

18/03/2020

  • Contents, p. 2
  • USS Enterprise 'The Cage' Specification, p. 3
  • USS Enterprise ('The Cage'), pp. 4-5
  • The Original USS Enterprise, pp. 6-7
  • The USS Enterprise Onboard Ship, pp. 8-19
Eaglemoss USS Enterprise (The Cage) 129 mm 1:2240
2021[59]
(26) Star Trek Official Starships Collection USS Armstrong cover USS Armstrong NCC-1769

12/08/2021

  • Contents, p. 2
  • USS Armstrong NCC-1769 Specification, p. 3
  • Profile: USS Armstrong NCC-1769, pp. 4-9
  • Designing The Armada, pp. 10-17
  • On Screen, p. 18
Eaglemoss USS Armstrong NCC-1769 120 mm 1:2117
(27) Star Trek Official Starships Collection USS Mayflower cover USS Mayflower NCC-1621

02/10/2021

  • Contents, p. 2
  • USS Mayflower NCC-1621 Specification, p. 3
  • Profile: USS Mayflower NCC-1621, pp. 4-7
  • Designing The Ship: USS Mayflower, pp. 08-10
  • Behind The Scenes: The Narada, pp. 11-17
  • On Screen, p. 18
Eaglemoss USS Mayflower 122 mm 1:1934
(28) Star Trek Official Starships Collection USS Newton cover USS Newton NCC-1727

06/10/2021

  • Contents, p. 2
  • USS Newton NCC-1727 Specification, p. 3
  • Profile: USS Newton NCC-1727, pp. 4-9
  • Star Trek: Concept Illustrator, pp. 10-17
  • On Screen, p. 18
Eaglemoss USS Newton 125 mm 1:2520
(29) Star Trek Official Starships Collection USS Valiant Concept cover USS Valiant Concept

13/11/2021

  • Contents, p. 2
  • USS Valiant NCC-6089 Specification, p. 3
  • Profile: USS Valiant NCC-6089, pp. 4-7
  • Designing the Ship: U.S.S Valiant, pp. 8-13
  • U.S.S Defiant: Top Ten Moments, p. 14-18
Eaglemoss USS Valiant Concept 99 mm n/a
2022
(30)
Star Trek Official Starships Collection Steth's Coaxial Starship cover.jpg
Steth's Coaxial Starship

12/01/2022

  • Contents, p. 2
  • Steth's Starship Specification, p. 3
  • Profile: Steth's Starship, pp. 4-09
  • Robert Duncan McNeill On Tom Paris, pp. 8-17
  • On Screen, p. 18
Eaglemoss Steths Ship 126 mm 1:163
(31)
Star Trek Official Starships Collection Kazon Predator Class cover
Kazon Predator Class

12/01/2022

  • Contents, p. 2
  • Kazon Predator Class Specification, p. 3
  • Profile: Kazon Predator Class, pp. 4-9
  • Designing the Ship: Kazon Predator Class, pp. 10-13
  • Aliens Of The Delta Quadrant, p. 14-17
  • On Screen, p. 18
Eaglemoss Kazon Carrier 134 mm 1:13433
(32) Star Trek Official Starships Collection Nomad cover Nomad

21/01/2022

  • Contents, p. 2
  • Nomad Specification
  • Nomad, pp. 5-9
  • Kirk and Computers, pp. 10-13
  • John Meredyth Lucas, pp. 14-17
  • On screen, p. 18
Eaglemoss Nomad 134 mm 1:82
(33) Star Trek Official Starships Collection Talarian Observation Craft cover Talarian Observation Craft

21/01/2022

  • Contents, p. 2
  • Talarian Observation Craft Specification, p. 3
  • Profile: Talarian Observation Craft, pp. 4-9
  • Designing the Ship: Talarian Observation Craft, pp. 10-13
  • Behind The Scenes: Jeri Taylor, p. 14-17
  • On Screen, p. 18
STSS Bonus issue 33 Talarian Observation Craft Starship 100mm 1:1500
(34) Star Trek Official Starships Collection Klingon D5 Tanker cover Klingon D-5 Class Tanker (Variant)

11/04/2022

  • Contents, p. 2
  • Klingon D5-Class Tanker Variant Specification, p. 3
  • Profile: Klingon D5 Tanker Variant, pp. 4-7
  • Battle Cruiser Fleet Listings, pp. 8-17
  • On Screen, p. 18
Eaglemoss STSS Bonus 34 Klingon D5 Tanker 120mm 1:1292
(35) Star Trek Official Starships Collection Hierarchy Assault Ship Cover Hierarchy Assault Ship

11/04/2022

  • Contents, p. 2
  • Hierarchy Assault Ship Specification, p. 3
  • Profile: Hierarchy Assault Ship, pp. 4-9
  • Designing the Hierarchy Ship, pp. 10-11
  • Directing The Doctor: John Bruno & Robert Picardo, p. 12-17
  • On Screen, p. 18
Eaglemoss STSS Bonus 35 Hierarchy Assault Vessel 84mm n/a
Scheduled but cancelled 2022 release-ready issues/2023 post-bankruptcy (model-only[60]) releases
(36) Star Trek Official Starships Collection Reman Scorpion Reman Scorpion Attack Flier

09/2022

  • n/a
Eaglemoss STSS Bonus 36 Reman Scorpion starship 103 mm 1:68
(37)
&
(37A)
Star Trek Official Starships Collection Cravic Warship Cravic warship
&
Pralor warship (model-only convention exclusive)[61]
  • n/a
Eaglemoss Cravic Warship 80 mm 1:5626
Eaglemoss Pralor Warship

Unrealized considered Bonus Edition issues[]

These concerned issues that were considered, but had not entered the asset production stage yet.

Temp. cover Title Model
Star Trek Official Starships Collection Temp cover Wadi ship Wadi-Bajoran-Trill starship
Star Trek Official Starships Collection Temp cover Straleb security vessel Straleb security vessel
Star Trek Official Starships Collection Temp cover Romulan Warbird (vertical concept) D'deridex initial design sketches
Star Trek Official Starships Collection Temp cover USS Emmett Till (β) [62] Eaglemoss USS Emmett Till

Special Edition issues[]

Official Starships Collection Special Editions logo
Ira Steven Behr with Eaglemoss DS9

Ira Steven Behr with a DS9 model

Eaglemoss received licensing to release starships from Star Trek's alternate reality (officially known as the Kelvin Timeline since 2016) as Special Editions, alongside unique starships and space stations from Star Trek's prime reality.

Made of the same materials as the Standard Editions, most Special Edition models are about six to eight inches long, and subscribers receive a small discount when purchasing them. The seventeenth release featured a battery-powered internal LED light.

These larger releases are retailed by the company's webshops and a number of other retailers.

2013 | 2014 | 2015 | 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | 2023
No. Cover Title/Contents Model Lng* Scale
2013
(SP1) Star Trek Official Starships Collection Issue SP1 Deep Space 9 Special Issue [63]

28/11/2013

  • Contents, p. 2
  • Deep Space 9 Specification, p. 3
  • Deep Space 9, pp. 4-7
  • Visiting DS9, pp. 8-9
  • Station Profile, pp. 10-11
  • Designing Deep Space 9, pp. 12-15
  • Filming The Station, pp. 16-17
  • On Screen, p. 18
Eaglemoss DS9 Special prototype 152 mm ø
93 mm h
1:9551
2014
(SP2) Star Trek Official Starships Collection SP2 USS Enterprise NCC-1701 (2258) Special Issue

06/03/2014

  • Contents, p. 2
  • USS Enterprise Specification, p. 3
  • USS Enterprise, pp. 4-5
  • Designing The Enterprise, pp. 6-10, 12-19
  • Enterprise Interiors, p. 11
Eaglemoss Special 2 USS Enterprise alt reality 220 mm 1:3297 [64]
(SP3) Star Trek Official Starships Collection Issue SP3 USS Vengeance Special Issue

30/10/2014

  • Contents, p. 2
  • USS Vengeance Specification, p. 3
  • USS Vengeance, pp. 4-5
  • Designing The Vengeance, pp. 6-12, 14-19
  • Vengeance Bridge Design, p. 13
Eaglemoss SP3 USS Vengeance 215 mm 1:6805
2015
(SP4) Star Trek Official Starships Collection Issue SP4 D4 Bird-of-Prey Special Issue

02/04/2015

  • Contents, p. 2
  • D4 Bird-of-Prey Specification, p. 3
  • Klingon D4 Bird-of-Prey, pp. 4-5
  • Designing The D4 Bird-of-Prey, pp. 6-19
Eaglemoss SP4 Klingon D4 Class Patrol Ship 139 mm
192 mm w
1:183
(SP5) Star Trek The Official Starships Collection Issue SP5 USS Kelvin Special Issue

15/10/2015

  • Contents, p. 2
  • USS Kelvin Specification, p. 3
  • USS Kelvin, pp. 4-5
  • Designing The Kelvin, pp. 6-19
Eaglemoss SP5 USS Kelvin 200 mm 1:1575 [65]
2016
(SP6) Star Trek Official Starships Collection Issue SP6 NX-Class Refit (SS Enterprise NX-01) Special Issueb

17/03/2016

  • Contents, p. 2
  • NX-Class Refit Specification, p. 3
  • The Refit Enterprise NX-01, pp. 4-5
  • Designing The NX-Class Refit, pp. 6-19
Eaglemoss SP6 Enterprise NX-01 refit 183 mm 1:1230
(SP7) Star Trek Official Starships Collection Issue SP7 Spock's Jellyfish Ship Special Issue

24/11/2016

  • Contents, p. 2
  • Spock’s Jellyfish Ship Specification, p. 3
  • Jellyfish Ship, pp. 4-5
  • Designing The Jellyfish, pp. 6-19
Eaglemoss SP7 Jellyfish 173 mm
140 mm h
1:208
2017
(SP8) Star Trek Official Starships Collection issue SP8 USS Franklin Special Issue

24/04/2017

  • Contents, p. 2
  • USS Franklin Specification, p. 3
  • USS Franklin, pp. 4-5
  • Designing The Franklin, pp. 6-19
Eaglemoss SP8 USS Franklin 198 mm 1:693
(SP9) Star Trek Official Starships Collection issue SP9 Altamid Swarm Ship Special Issue

06/07/2017

  • Contents, p. 2
  • Altamid Swarm Ship Specification, p. 3
  • Altamid Swarm Ship, pp. 4-5
  • Designing The Swarm Ship, pp. 6-19
Eaglemoss SP9 Swarm Ship 221 mm 1:54
(SP10) Star Trek Official Starships Collection issue SP10 Deep Space Station K-7 Special Issueb

31/08/2017

Eaglemoss SP11 Deep Space Station K-7 225 mm ø
111 mm h
1:2000 [66]
(SP11) Star Trek Official Starships Collection issue SP11 USS Enterprise XCV-330 Special Issue

20/12/2017

  • Contents, p. 2
  • USS Enterprise Specification, p. 3
  • USS Enterprise XCV-330, pp. 4-5
  • History Of The Ring Ship, pp. 6-13
  • The Motion Picture's Lost Aliens, pp. 14-19
Star Trek Official Starships Collection SP11 XCV Enterprise 210 mm
133 mm ø
1:1429 [67]
2018
(SP12) Star Trek Official Starships Collection issue SP12 USS Enterprise NCC-1701 Star Trek Beyond Special Issue

20/03/2018

  • Contents, p. 2
  • USS Enterprise Specification, p. 3
  • USS Enterprise NCC-1701 (2260-2263), pp. 4-5
  • Redesigning The Enterprise, pp. 6-19
Eaglemoss SP12 Star Trek Beyond USS Enterprise 220 mm 1:3295
(SP13) Star Trek Official Starships Collection issue SP13 Klingon Battlecruiser Star Trek (2009) Special Issue

07/06/2018

  • Contents, p. 2
  • Klingon Battlecruiser Specification, p. 3
  • Klingon Battlecruiser, pp. 4-5
  • Redesigning The Battlecruiser, pp. 6-15
  • The Evolution Of The Battlecruiser, pp. 16-19
Eaglemoss SP13 Klingon Warbird 225 mm 1:1556 [68]
(SP14) Star Trek Official Starships Collection issue SP14 USS Kobayashi Maru ECS-1022 Special Issue

26/09/2018

Eaglemoss SP14 Kobayashi Maru 220 mm 1:2555 [69]
(SP15) Star Trek Official Starships Collection issue SP15 Spacedock Special Issue

20/12/2018

  • Contents, p. 2
  • Spacedock Specification, p. 3
  • Spacedock, pp. 4-5
  • How To Make A Vintage Port, pp. 6-19
Eaglemoss SP15 Earth Spacedock 139 mm ø
200 mm h [70]
1:27338
2019
(SP16) Star Trek Official Starships Collection issue SP16 V'ger Special Issue

08/03/2019

  • Contents, p. 2
  • V'ger Specification, p. 3
  • Designing V'ger The Living Machine, pp. 4-13
  • Designing The Trip Inside V'ger, pp. 14-19
Eaglemoss SP16 V'ger 220 mm 1:354545 [71]
(SP17) Star Trek Official Starships Collection issue SP17 Planet Killer Special Issue [72]

06/06/2019

  • Contents, p. 2
  • Planet Killer Specification, p. 3
  • Planet Killer, pp. 4-7
  • Behind The Scenes: Making The Doomsday Machine, pp. 8-13
  • Behind The Scenes: Star Trek's Second Generation, pp. 14-17
  • On Screen, p. 18
Eaglemoss SP17 Planet Killer 219 mm 1:22831 [73]
(SP18) Star Trek Official Starships Collection issue SP18 Reman Warbird Scimitar

28/08/2019

  • Contents, p. 2
  • Scimitar Specifications, p. 3
  • Shinzon's Reman Flagship Scimitar, pp. 4-9
  • Designing The Scimitar, pp. 10-17
  • On Screen, p. 18
Eaglemoss Scimitar 132 mm
203 mm w
1:6742
(SP19) Star Trek Official Starships Collection issue SP19 Son'a Flagship Special Issue

13/10/2019

  • Contents, p. 2
  • Son'a Flagship Specification, p. 3
  • Ahdar Ru'afo's Flagship, pp. 4-5
  • Designing The Son'a Flagship, pp. 6-19
Eaglemoss SP19 Son'a Flagship 174 mm 1:2034
2020
(SP20) Star Trek Official Starships Collection issue SP20 USS Gold Enterprise NCC-1701-D Special Issue [74]

10/01/2020

  • Contents, p. 2
  • USS Gold Enterprise NCC-1701-D, p. 3
  • Designing The Interior Of The Enterprise-D, pp. 4-19
Eaglemoss SP20 Gold USS Enterprise-D 139 mm 1:4610
(SP21) Star Trek Official Starships Collection issue SP21 Vulcan Long Range Shuttle Special Issue

05/03/2020

  • Contents, p. 2
  • Vulcan Long Range Shuttle Specification, p. 3
  • Vulcan Long Range Shuttle, pp. 4-9
  • Designing The Vulcan Warp Sled, pp. 10-17
  • Bringing Back Spock, pp. 18-19
Eaglemoss SP21 Vulcan Long Range Shuttle 217 mm 1:221 [75]
(SP22) Star Trek Official Starships Collection issue SP22 T'Plana-Hath Vulcan Lander Special Issue

02/06/2020

  • Contents, p. 2
  • Vulcan Lander Specification, p. 3
  • T'Plana-Hath, pp. 4-7
  • Designing The Vulcan Lander, pp. 8-19
Eaglemoss SP22 Vulcan T'Plana Hath 200 mm ø
84 mm h
1:215
(SP23) Star Trek Official Starships Collection issue SP23 Gold USS Enterprise NCC-1701 Special Issue

10/07/2020

  • Contents, p. 2
  • Gold USS Enterprise NCC-1701, p. 3
  • The USS Enterprise Design History, pp. 4-19
Eaglemoss SP23 Gold USS Enterprise 129 mm 1:2240
(SP24) Star Trek Official Starships Collection issue SP24 Regula Ib Special Issue

17/10/2020

Eaglemoss SP24 Regula I 182 mm h
111 mm w [76]
1:1306
2021[77]
(SP25) Star Trek Official Starships Collection issue SP25 Son'a Collector Special Issue

17/01/2021

  • Contents, p. 2
  • Son'a Collector Specification, p. 3
  • Son'a Collector, pp. 4-5
  • Designing The Son'a Collector, pp. 6-19
Eaglemoss Son'a Collector 210 mm 1:7257 [78]
(SP26) Star Trek Official Starships Collection issue SP26 Relay Station 47 Special Issue

19/07/2021

  • Contents, p. 2
  • Relay Station 47 Specification, p. 3
  • Subspace Relay Station 47, pp. 4-5
  • Designing The Relay Station, pp. 6-9
  • 47 Star Trek's Number, pp. 10-19
Eaglemoss Relay Station 47 180 mm h
163 mm w
1:890
(SP27) Star Trek Official Starships Collection issue SP27 Son'a Battleship Special Issue

31/07/2021

  • Contents, p. 2
  • Son'a Battleship Specification, p. 3
  • Profile: Son'a Battleship, pp. 4-9
  • Designing the Ship, pp. 10-15
  • Creating the Ba'ku Village, pp. 16-19
Eaglemoss SP27 Son'a Battleship 151 mm l
188 mm w
n/a
2022
(SP28) Star Trek Official Starships Collection issue SP28 Jupiter Station Special Issue

01/2022

  • Contents, p. 2
  • Jupiter Station, p. 3
  • Profile: Jupiter Station, pp. 4-9
  • Designing the Station, pp. 10-11
  • Behind the Scenes: Father Issues, pp. 12-17
  • On Screen: "Life Line", p. 18
Eaglemoss SP28 Jupiter Station 170 mm h
220 mm w
n/a
(SP29) Star Trek Official Starships Collection issue SP29 Ty'Gokor Orbital Station Special Issue[79]

25/03/2022

  • Contents, p. 2
  • Ty'Gokor Orbital Station, p. 3
  • Profile: Ty'Gokor Orbital Station, pp. 4-9
  • Designing Ty'Gokor, pp. 10-11
  • Face of the Enemy, pp. 12-18
Ty’Gokor Orbital Facility Special Issue 250 mm h
224 mm w
n/a
Scheduled but cancelled 2022 release-ready issue/2023 post-bankruptcy (model-only[60]) release
(SP30) Star Trek Official Starships Collection issue SP30 Caretaker's Array Special Issue[80]

06/2022

  • Contents, p. 2
  • Caretaker's Array specification, p. 3
  • Profile: Caretaker's Array, pp. 4-9
  • Designing the Array, pp. 10-19
Eaglemoss STSS Bonus 30 Caretakers Array 226 mm l
108 mm w
n/a

XL Edition issues[]

Eaglemoss Star Trek Starships XL Edition logo

A number of "significant" starships from the Star Trek universe have also been produced in a larger size than the Standard, Bonus, and most Special Editions. Released as XL Editions, these models generally measure between eight-and-a-half and twelve inches long, and are available from company webshops and a variety of other retailers.

Eaglemoss TOS USS Enterprise comparison

XL and Standard Edition USS Enterprise models

Following the successful roll-out of the first three of these "Oversized" (or "Large Scale") issues to subscribers and retail, this sub-line was also marketed as the "Star Trek Starships XL Edition" and was launched as a separate subscription partwork on Eaglemoss' US website. [98] The company has plans for about thirty XL issues in total, as of September 2020. [99]

Beginning with XL Edition 22, a slightly smaller 20-page magazine (measuring 227 × 155 mm) is enclosed with each XL Edition, which has been designed to be stored (and retailed) within the box beneath the model. This format was also used for the magazines enclosed with the repackaged Best of XL Edition releases outlined below (in Repacks).

2017 | 2018 | 2019 | 2020 | 2021 | 2022 | 2023
No. Cover Title/Contents Model Lng* Scale
2017
(XL1) Star Trek Official Starships Collection Special Issue USS Enterprise NCC-1701 (TOS) USS Enterprise NCC-1701 Special Issue

28/01/2017

  • Contents, p. 2
  • USS Enterprise Specification, p. 3
  • Making The Cage - The Voyage Begins, pp. 4-11
  • Casting Star Trek, pp. 12-13
  • Where No Man Has Gone..., pp. 14-19
Eaglemoss Large Scale USS Enterprise 269 mm 1:1074
(XL2) Star Trek Official Starships Collection Special Issue USS Enterprise NCC-1701-D USS Enterprise NCC-1701-D Special Issue

23/06/2017

  • Contents, p. 2
  • USS Enterprise NCC-1701-D Specification, p. 3
  • Back On Board, pp. 4-15
  • Casting The Next Generation, pp. 16-19
Eaglemoss Large Scale USS Enterprise-D 220 mm 1:2914
(XL3) Star Trek Official Starships Collection Special Issue USS Enterprise NCC-1701-E USS Enterprise NCC-1701-E Special Issue

31/07/2017

  • Contents, p. 2
  • USS Enterprise NCC-1701-E Specification, p. 3
  • Star Trek: First Contact: New Beginnings, pp. 4-11
  • Borg Maquettes, pp. 12-13
  • Becoming The Borg Queen, pp. 14-19
Eaglemoss Large Scale USS Enterprise-E 270 mm 1:2537
(XL4) Star Trek Official Starships Collection Special Issue Enterprise NX-01 Enterprise NX-01 Special Issue

21/10/2017

  • Contents, p. 2
  • USS Enterprise NX-01 Specification, p. 3
  • Creating Enterprise: First Steps, pp. 4-11
  • Casting Enterprise, pp. 12-15
  • Filming Enterprise: Making It Real, pp. 16-19
Eaglemoss Large Scale Enterprise NX-01 220 mm 1:1023
(XL5) Star Trek Official Starships Collection Special Issue USS Voyager NCC-74565 USS Voyager NCC-74656 Special Issue

28/12/2017

  • Contents, p. 2
  • USS Voyager NCC-74656 Specification, p. 3
  • Into The Unknown, pp. 4-13
  • New Directions, pp. 14-19
Eaglemoss XL Edition USS Voyager 260 mm 1:1319
2018
(XL6) Star Trek Official Starships Collection Special Issue USS Enterprise NCC-1701-A USS Enterprise NCC-1701-A Special Issue

06/06/2018

  • Contents, p. 2
  • USS Enterprise NCC-1701-A Specification, p. 3
  • The Return Of Star Trek, pp. 4-11
  • Miraculous Visual Effects, pp. 12-19
Eaglemoss XL USS Enterprise 1701-A 267 mm 1:1142
(XL7) Star Trek Official Starships Collection Special Issue USS Defiant NX-74205 USS Defiant NX-74205 Special Issue

13/07/2018

  • Contents, p. 2
  • USS Defiant Specification, p. 3
  • A New Frontier, pp. 4-11
  • Casting Deep Space 9, pp. 12-15
  • Filming DS9, pp. 16-17
  • Enter The Defiant, pp. 18-19
Eaglemoss XL USS Defiant 220 mm 1:776
(XL8) Star Trek Official Starships Collection Special Issue USS Enterprise NCC-1701-B USS Enterprise NCC-1701-B Special Issue

09/08/2018

Eaglemoss XL USS Enterprise-B 267 mm 1:1749
(XL9) Star Trek Official Starships Collection Special Issue USS Reliant NCC-1864 USS Reliant NCC-1864 Special Issue

14/09/2018

Eaglemoss XL USS Reliant 220 mm 1:1059
(XL10) Star Trek Official Starships Collection Special Issue USS Enterprise NCC-1701-C USS Enterprise NCC-1701-C Special Issue

02/11/2018

  • USS Enterprise NCC-1701-C
  • Contents, p. 2
  • USS Enterprise NCC-1701-C Specification, p. 3
  • Out Of The Past, pp. 4-9
  • Going To War, pp. 10-13
  • Time For Action, pp. 14-19
Eaglemoss XL USS Enterprise-C 256 mm 1:2031
(XL11) Star Trek Official Starships Collection Special Issue USS Enterprise NCC-1701 (DIS) USS Enterprise NCC-1701 (DIS) Special Issueb

19/12/2018

  • Contents, p. 2
  • USS Enterprise Specification, p. 3
  • USS Enterprise, pp. 4-5
  • Designing The Enterprise, pp. 6-19
Eaglemoss XL 11 USS Enterprise DIS 259 mm 1:1707
2019
(XL12) Star Trek Official Starships Collection Special Issue Akira Class Akira Class (USS Thunderchild) Special Issue [81]

15/08/2019

  • Contents, p. 2
  • Akira Class Specification, p. 3
  • Akira Class, pp. 4-5
  • The Star Trek Art Of Alex Jaeger, pp. 6-19
Eaglemoss XL 12 Akira class 221 mm 1:1991 [82]
(XL13) Star Trek Official Starships Collection Special Issue Klingon Bird-of-Prey Klingon Bird-of-Prey Special Issue

06/06/2019

Eaglemoss XL 13 Klingon Bird-of-Prey 160 mm
245 mm w
1:869
(XL14) Star Trek Official Starships Collection Special Issue Runabout Runabout (USS Orinoco) Special Issue

11/07/2019

  • Contents, p. 2
  • Runabout Specification, p. 3
  • Runabout, pp. 4-5
  • Designing The Runabout, pp. 6-19
Eaglemoss XL 14 Runabout 209 mm 1:111
(XL15) Star Trek Official Starships Collection Special Issue USS Excelsior NCC-2000 USS Excelsior NCC-2000

15/08/2019

  • Contents, p. 2
  • USS Excelsior NCC-2000 Specification, p. 3
  • USS Excelsior NCC-2000, pp. 4-7
  • Young Minds Fresh Ideas, pp. 8-17
  • The Other Excelsiors, pp. 18-19
Eaglemoss XL 15 USS Excelsior 269 mm 1:1736
(XL16) Star Trek Official Starships Collection Special Issue Romulan Warbird Romulan Warbird Special Issue

15/10/2019

  • Contents, p. 2
  • D'deridex Class Specification, p. 3
  • Romulan Warbird, pp. 4-5
  • The TNG Art Of Andrew Probert, pp. 6-19
Eaglemoss XL Romulan Warbird 220 mm 1:6150
(XL17) Star Trek Official Starships Collection Special Issue Deep Space 9 Deep Space 9 Special Issue [83]

11/12/2019

  • Contents, p. 2
  • Deep Space 9 Specification, p. 3
  • Deep Space 9, pp. 4-5
  • Designing Deep Space 9, pp. 6-13
  • Inside Deep Space 9, pp. 14-19
Eaglemoss XL DS9 202 mm ø 1:7187
2020
(XL18) Star Trek Official Starships Collection Special Issue Klingon K't'inga-Class Klingon K't'inga-Class Special Issue

08/02/2020

  • Contents, p. 2
  • Klingon Battle Cruiser Specification, p. 3
  • K't'inga-class Battle Cruiser, pp. 4-5
  • Designing The Klingon Battle Cruiser, pp. 6-19
Eaglemoss XL Klingon K't'inga Class 267 mm 1:801
(XL19) Star Trek Official Starships Collection Special Issue USS Enterprise NCC-1701-J USS Enterprise NCC-1701-J Special Issue

27/03/2020

  • Contents, p. 2
  • USS Enterprise NCC-1701-J Specification, p. 3
  • Designing The Enterprise-J, pp. 4-7
  • Doug Drexler Starship Designs, pp. 8-19
Eaglemoss XL USS Enterprise NCC-1701-J 220 mm 1:14632
(XL20) Star Trek Official Starships Collection Special Issue Future USS Enterprise NCC-1701-D Future USS Enterprise NCC-1701-D ('All Good Things...') Special Issue

20/06/2020

  • Contents, p. 2
  • Future USS Enterprise NCC-1701-D Specification, p. 3
  • Future USS Enterprise NCC-1701-D, pp. 4-7
  • Coming To An End, pp. 8-15
  • The Final Ships, pp. 16-19
Eaglemoss XL Future USS Enterprise-D 220 mm 1:2914
(XL21) Star Trek Official Starships Collection Special Issue USS Discovery NCC-1031 USS Discovery NCC-1031 Special Issue

07/08/2020

  • Contents, p. 2
  • USS Discovery Specification, p. 3
  • USS Discovery, pp. 4-5
  • Designing The USS Discovery, pp. 7-19
Eaglemoss XL21 USS Discovery 289 mm 1:2597
(XL22) Star Trek Official Starships Collection Special Issue USS Shenzhou USS Shenzhou Special Issue [84]

08/10/2020

  • Contents, p. 2
  • USS Shenzhou Specification, p. 3
  • Designing The USS Shenzhou, pp. 4-19
Eaglemoss XL22 USS Shenzhou 255 mm 1:1660
(XL23) Star Trek Official Starships Collection Special Issue USS Enterprise NCC-1701 (2009) USS Enterprise NCC-1701 (2009) Special Issue

15/12/2020

  • Contents, p. 2
  • USS Enterprise Specification, p. 3
  • Designing The Enterprise, pp. 4-9
  • Designing The Narada, pp. 10-19
Eaglemoss XL23 USS Enterprise 2009 259 mm 1:2799
2021
(XL24) Star Trek Official Starships Collection Special Issue Delta Flyer Delta Flyer Special Issue

16/02/2021

  • Contents, p. 2
  • Delta Flyer Specification, p. 3
  • The Delta Flyer, pp. 4-5
  • Designing The Delta Flyer, pp. 6-19
Eaglemoss XL24 Delta Flyer 220 mm 1:95
(XL25) Star Trek Official Starships Collection Special Issue La Sirena La Sirena Special Issue

11/06/2021

  • Contents, p. 2
  • La Sirena Specification, p. 3
  • La Sirena, pp. 4-5
  • Designing The La Sirena, pp. 6-19
Eaglemoss XL25 La Sirena 254 mm 1:337
(XL26) Star Trek Official Starships Collection Special Issue USS Bonchune Nebula Class USS Bonchune Nebula Class Special Issue

11/06/2021

  • Contents, p. 2
  • Nebula Class Specification, p. 3
  • USS Bonchune Nebula Class, pp. 4-9
  • Designing The Nebula Class, pp. 10-13
  • The Making Of "The Wounded", pp. 14-19
Eaglemoss XL26 USS Bonchune 158 mm 1:4057
(XL27) Star Trek Official Starships Collection Special Issue USS Equinox NCC-72381 USS Equinox NCC-72381 Special Issue

30/09/2021

  • Contents, p. 2
  • U.S.S. Equinox specification, p. 3
  • Profile: U.S.S. Equinox, pp. 4-7
  • Designing the Equinox, pp. 8-13
  • The VFX of "Equinox", pp. 14-19
Eaglemoss XL27 USS Equinox 243 mm 1:910
(XL28) Star Trek Official Starships Collection Special Issue Oberth Class USS Pegasus NCC-53847 Special Issue[85]

06/10/2021

Eaglemoss XL28 USS Pegasus 231 mm 1:520
2022
(XL29) Star Trek Official Starships Collection Special Issue USS Discovery NCC-1031-A USS Discovery NCC-1031-A Refit Special Issue

01/02/2022

  • Contents, p. 2
  • U.S.S. Discovery specification, p. 3
  • Profile: U.S.S. Discovery-A, pp. 4-5
  • Designing the Discovery-A, pp. 6-19
Eaglemoss XL29 USS Discovery-A 284 mm 1:2655
(XL30) Star Trek Official Starships Collection Special Issue USS Prometheus NX-59650 USS Prometheus Special Issue

23/03/2022

  • Contents, p. 2
  • U.S.S. Prometheus specification, p. 3
  • Profile: U.S.S. Prometheus, pp. 4-9
  • Designing the Prometheus, pp. 10-15
  • The Voyage Home, pp. 16-19
Eaglemoss XL30 USS Prometheus 260 mm 1:1596
Scheduled but cancelled 2022 release-ready issue/2023 post-bankruptcy (model-only[60]) release
(XL31) Star Trek Official Starships Collection Special Issue USS Stargazer NCC-2893 USS Stargazer Special Issue[86]

06/2022

  • Contents, p. 2
  • U.S.S. Stargazer specification, p. 3
  • Profile: U.S.S. Stargazer, pp. 4-7
  • Designing Stargazer, pp. 8-11
  • Young Picard, pp. 12-15
  • False Profits, pp. 16-19
Eaglemoss XL31 USS Stargazer 235 mm 1:1319

Limited Edition Gold XL Exclusives[]

Similar to the displayed models seen in the observation lounge of the USS Enterprise-E and commonly debuting as "Exclusives" for conventions, Limited Edition versions of a number of XL USS Enterprise models are also manufactured with 18-carat gold-plated exteriors and are available in limited quantities.

No. Cover Title/Contents Model Lng* Scale
(XLG1) Star Trek Official Starships Collection Limited Edition USS Enterprise NCC-1701-D USS Enterprise NCC-1701-D Limited Edition [87]

03/02/2021 - Limited to 1,000 worldwide

  • Contents, p. 2
  • USS Enterprise NCC-1701-D Specification, p. 3
  • USS Enterprise NCC-1701-D, pp. 4-9
  • Designing The Enterprise-D, pp. 10-19
Eaglemoss XL Edition Gold USS Enterprise-D 220 mm 1:2914
(XLG2) Star Trek Official Starships Collection Limited Edition USS Enterprise NCC-1701 USS Enterprise NCC-1701 Limited Edition [88]

20/08/2021 - Limited to 500 worldwide

  • Contents, p. 2
  • USS Enterprise NCC-1701 Specification, p. 3
  • USS Enterprise, pp. 4-5
  • A Tour Of The USS Enterprise, pp. 6-19
Eaglemoss XL Edition Gold USS Enterprise 269 mm 1:1074
Scheduled but cancelled 2022 release-ready issue/2023 post-bankruptcy (model-only[60]) release
(XLG3) Star Trek Official Starships Collection Temp cover USS Enterprise NCC-1701-E Limited Edition (First Contact version)

15/09/2022 - Limited to 250 worldwide (as originally planned[89])

  • n/a
Eaglemoss XL Edition Gold USS Enterprise E.jpg 270 mm 1:2537

Shuttlecraft issues[]

Official Starships Collection Shuttlecraft logo

Shuttlecraft models are smaller than the other releases, are made of metallic resin, include a small standardized stand, and are individually packaged within each four-pack box. Presently, shuttle issues are only available for purchase in four-packs, in all markets. Shuttles may be offered as individual issues and alternate deco (or registry) variants may be manufactured in the future, if further production runs occur. [100]

In January 2015, shuttle issues were previewed to subscribers in Germany. By adding the "Premium" subscription option (for a small monthly fee), subscribers received a new shuttle every twenty issues. The first shuttle reached these subscribers in November 2015 [101], and only ships from the first two shuttle packs were included in the offer.

An eight-page booklet (measuring 150 × 210 mm, the smallest magazine dimension of all Eaglemoss' Star Trek publications) that contains (exclusively) "in-universe" information accompanies each model. It features master systems display illustrations (okudagrams) newly created for each issue by Mike Okuda.

These schematics are also printed onto translucent plastic sheets (measuring 120 × 80 mm) which can be mounted on (included) plastic clip stands.

Rick Sternbach and Tim Earls designed the sheets for the third shuttlecraft four-pack, while Doug Drexler was enlisted to design them for the fifth and sixth sets. Okuda designed the sheets for the seventh set.

Set 1 | Set 2 | Set 3 | Set 4 | Set 5 | Set 6 | Set 7| Set 8

No. Cover Title/Contents Model Lng* Scale
Set 1 (14/10/2015)
01 Star Trek Official Starships Collection Issue 01 Shuttle Shuttlecraft Galileo
  • Contents, p. 2
  • Galileo, pp. 3-5
  • Schematics, pp. 6-7
Eaglemoss Galileo II 70 mm 1:104
02 Star Trek Official Starships Collection Shuttle Issue 02 Shuttlecraft Type-6 (Goddard)
  • Contents, p. 2
  • Goddard, pp. 3-5
  • Schematics, pp. 6-7
Eaglemoss Goddard 70 mm 1:86
03 Star Trek Official Starships Collection Shuttle Issue 03 Shuttlecraft Type-10 (Chaffee)
  • Contents, p. 2
  • Chaffee, pp. 3-5
  • Schematics, pp. 6-7
Eaglemoss Chaffee 71 mm 1:111
04 Star Trek Official Starships Collection Shuttle Issue 04 Shuttlecraft Type-9 (Cochrane)
  • Contents, p. 2
  • Cochrane, pp. 3-5
  • Schematics, pp. 6-7
Eaglemoss Cochrane 69 mm 1:120
Set 2 (16/02/2017)
05 Star Trek Official Starships Collection Shuttle Issue 05 Executive Shuttle (SD-103)
  • Contents, p. 2
  • Executive Shuttle, pp. 3-5
  • Schematics, pp. 6-7
Eaglemoss SD-103 type shuttle 90 mm 1:289
06 Star Trek Official Starships Collection Shuttle Issue 06 Shuttlecraft Pod 1
  • Contents, p. 2
  • Pod 1, pp. 3-5
  • Schematics, pp. 6-7
Eaglemoss NX-01 Pod 1 90 mm 1:67
07 Star Trek Official Starships Collection Shuttle Issue 07 Shuttlecraft Type-7 (Hawking) [90]
  • Contents, p. 2
  • Hawking, pp. 3-5
  • Schematics, pp. 6-7
Eaglemoss Type 7 Shuttlecraft 80 mm 1:106
08 Star Trek Official Starships Collection Shuttle Issue 08 Type 15 Shuttle (Aldrin)
  • Contents, p. 2
  • Aldrin, pp. 3-5
  • Schematics, pp. 6-7
Star Trek Official Starships Collection Shuttlepod Type 15 60 mm 1:60
Set 3 (19/10/2017)
09 Star Trek Official Starships Collection Shuttle Issue 09 Shuttlecraft Argo
  • Contents, p. 2
  • Type-17, pp. 3-5
  • Schematics, pp. 6-7
Eaglemoss Argo shuttle 80 mm 1:250
10 Star Trek Official Starships Collection Shuttle Issue 10 Shuttlecraft Type-11 (Enterprise-E)
  • Contents, p. 2
  • Type-11, pp. 3-5
  • Schematics, pp. 6-7
Eaglemoss Type 11 Shuttlecraft 85 mm 1:188
11 Star Trek Official Starships Collection Shuttle Issue 11 Travel Pod (05)
  • Contents, p. 2
  • Travel Pod, pp. 3-5
  • Schematics, pp. 6-7
Eaglemoss Travel Pod 49 mm 1:90
12 Star Trek Official Starships Collection Shuttle Issue 12 Workbee
  • Contents, p. 2
  • Workbee, pp. 3-5
  • Schematics, pp. 6-7
Eaglemoss Workbee 53 mm 1:60
Set 4 (10/11/2018)
13 Star Trek Official Starships Collection Shuttle Issue 13 Transport Shuttlecraft (12091)
  • Contents, p. 2
  • Transport Shuttle, pp. 3-5
  • Schematics, pp. 6-7
Eaglemoss Transport Shuttle 51 mm 1:137
14 Star Trek Official Starships Collection Shuttle Issue 14 USS Enterprise Passenger Shuttle (2)

10/11/2018 (set 4)

  • Contents, p. 2
  • Passenger Shuttle, pp. 3-5
  • Schematics, pp. 6-7
Eaglemoss USS Enterprise Passenger Shuttle 76 mm 1:158
15 Star Trek Official Starships Collection Shuttle Issue 15 Med Evac Shuttle (43) [91]
  • Contents, p. 2
  • Med Evac Shuttle, pp. 3-5
  • Schematics, pp. 6-7
Eaglemoss Starfleet Med Evac Shuttle 63 mm 1:143
16 Star Trek Official Starships Collection Shuttle Issue 16 USS Enterprise Warrant Shuttle
  • Contents, p. 2
  • Warrant, pp. 3-5
  • Schematics, pp. 6-7
Eaglemoss USS Enterprise Passenger Shuttle Warrant 82 mm 1:171
Set 5 (09/07/2019)
17 Star Trek Official Starships Collection Shuttle issue 17 Starfleet Air Tram (3)
  • Contents, p. 2
  • Starfleet Air Tram, pp. 3-5
  • Schematics, pp. 6-7
Eaglemoss Starfleet Air Tram 85 mm 1:141
18 Star Trek Official Starships Collection Shuttle issue 18 Starfleet Tug (5)
  • Contents, p. 2
  • Starfleet Tug, pp. 3-5
  • Schematics, pp. 6-7
Eaglemoss Starfleet Tug 74 mm 1:108
19 Star Trek Official Starships Collection Shuttle issue 19 USS Enterprise NCC-1701-A Galileo
  • Contents, p. 2
  • USS Enterprise NCC-1701-A Galileo, pp. 3-5
  • Schematics, pp. 6-7
Eaglemoss Galileo Shuttlecraft 79 mm 1:115
20 Star Trek Official Starships Collection Shuttle issue 20 Shuttlecraft Type-8 (Tereshkova)
  • Contents, p. 2
  • Shuttlecraft Type-8, pp. 3-5
  • Schematics, pp. 6-7
Eaglemoss Type-8 Shuttlecraft 70 mm 1:100
Set 6 (23/10/2019)
21 Star Trek Official Starships Collection Shuttle issue 21 Sphinx Workpod (β)
  • Contents, p. 2
  • Sphinx Workpod, pp. 3-5
  • Schematics, pp. 6-7
Eaglemoss Sphinx Workpod 70 mm 1:89
22 Star Trek Official Starships Collection Shuttle issue 22 Type-18 Shuttlepod (01)
  • Contents, p. 2
  • Type-18 Shuttlepod, pp. 3-5
  • Schematics, pp. 6-7
Eaglemoss Type-18 Shuttlepod 70 mm 1:64
23 Star Trek Official Starships Collection Shuttle issue 23 Hawking Type-6 Shuttle [92]
  • Contents, p. 2
  • Type-06 Shuttle, pp. 3-5
  • Schematics, pp. 6-7
Eaglemoss Hawking Type-6 Shuttle 78 mm 1:117
24 Star Trek Official Starships Collection Shuttle issue 24 Janeway's Armored Shuttle
  • Contents, p. 2
  • Armored Shuttle, pp. 3-5
  • Schematics, pp. 6-7
Eaglemoss Janeway's Armored Shuttle 80 mm 1:119
Set 7 (15/12/2020)
25 Star Trek Official Starships Collection Shuttle issue 25 Captain's Yacht Calypso
  • Contents, p. 2
  • Captain’s Yacht, pp. 3-5
  • Schematics, pp. 6-7
Eaglemoss Calypso 73 mm w 1:605
26 Star Trek Official Starships Collection Shuttle issue 26 Docking Shuttle
  • Contents, p. 2
  • Docking Shuttle, pp. 3-5
  • Schematics, pp. 6-7
Eaglemoss Docking Shuttle 70 mm 1:114
27 Star Trek Official Starships Collection Shuttle issue 27 Cyrano Jones' Spacematic
  • Contents, p. 2
  • Spacematic, pp. 3-5
  • Schematics, pp. 6-7
Eaglemoss Spacematic 76 mm 1:184
28 Star Trek Official Starships Collection Shuttle issue 28 Cargo Shuttle Type 9A (β)
  • Contents, p. 2
  • Cargo Shuttle Type 9A, pp. 3-5
  • Schematics, pp. 6-7
Eaglemoss Cargo Shuttle Type 9A 75 mm 1:140
Set 8 (12/2021)
29 Star Trek Official Starships Collection Shuttle issue 29 Vulcan Shuttle
  • Contents, p. 2
  • Vulcan Shuttle, pp. 3-5
  • Schematics, pp. 6-7
Eaglemoss Vulcan Shuttle ~83 mm
30 Star Trek Official Starships Collection Shuttle issue 30 Xindi-Insectoid Shuttle
  • Contents, p. 2
  • Xindi-Insectoid Shuttle, pp. 3-5
  • Schematics, pp. 6-7
Eaglemoss Xindi-Insectoid Shuttle ~83 mm
31 Star Trek Official Starships Collection Shuttle issue 31 Ferengi Shuttle
  • Contents, p. 2
  • Ferengi Shuttle, pp. 3-5
  • Schematics, pp. 6-7
Eaglemoss Ferengi Shuttle ~83 mm
32 Star Trek Official Starships Collection Shuttle issue 32 Klingon Toron Class Shuttle
  • Contents, p. 2
  • Klingon Toron Class Shuttle, pp. 3-5
  • Schematics, pp. 6-7
Eaglemoss Klingon Toron Class Shuttle ~64 mm

Repacks[]

Official Starships Collection Repacks logo

Starship sets[]

Each set includes a fifty-page booklet (measuring 168 × 216 mm) that contains material covering all of the starships in the set, compiled from the previously released individual magazines, as is detailed above. The booklet for both versions of the third set has sixty-five pages to accommodate the content for the extra (fourth) ship. All models are identical to their earlier releases (as Standard or Bonus Editions) and are packaged individually within the box for the set.

No. Cover Magazine title Box title/Box Released
(001) Star Trek Official Starships Collection Enterprise C-D-E 3-pack

 USS Enterprise

 Starship Enterprise Set of 3
Eaglemoss Enterprise C-D-E 3-pack ships
28/08/2015
(002) Star Trek Official Starships Collection Voyager Defiant Excelsior 3-pack  Starships Set of 3
Eaglemoss Voyager Defiant Excelsior 3-pack
26/11/2015
(003) Star Trek Official Starships Collection Enterprise NX+TOS+A+B 4-pack  Starship Enterprise
Eaglemoss Enterprise NX-TOS-A-B 4-pack
21/07/2016
(003) Star Trek Official Starships Collection Enterprise NX+TOS+A+B 4-pack  Starship Enterprise 4 Set
Eaglemoss Enterprise NX-TOS-A-E 4-pack
01/11/2017
(004) Star Trek Official Starships Collection Mirror Universe 3-pack cover

 ISS Enterprise

 Mirror Universe Ships
Eaglemoss Mirror Universe 3-pack
14/08/2017
(005) Star Trek Official Starships Collection KBoP 3-Pack cover  Klingon Bird-of-Prey Set of 3
Eaglemoss Klingon Bird-of-Prey 3-pack
10/11/2018

Collector's Editions[]

Best of STSS USS Enterprise-D packaging

Packaging mockup

Debuting exclusively in North America in February 2018 and marketed as the Best of the Star Trek: The Official Starships Collection for its first three years, Eaglemoss re-released twelve of its most popular Standard Edition issues in new windowbox packaging with attached J-hooks, enabling the boxes to be hung on pegs at retailers. The models within are identical to their earlier releases.

Downscaled to fit into the box beneath the model, a twenty-page booklet accompanies each starship and its stand. Each "collector's guide" (measuring 145 × 183 mm, a smaller format which fits the box packaging) contains the same content as the larger, original full-sized A4 magazine (as is detailed above) but the issue number is not printed on the cover. Later, in 2019, this packaging style (without the J-hook) became used for the cloaked USS Defiant 2500-copy convention exclusive in the US and UK as well.

In 2020, the range was expanded by six ships and its availability in entirety to the UK was announced as a convention exclusive range, [102](X) though like in the US, unsold copies ended up in the UK webstore as well. From 2021 onward however, after the Standard Edition range was terminated, the Collector's Edition packaging style became the standard for new outings in the Bonus Edition range.

Eleven more ships, USS Titan NCC-80102 (B05), Pralor Warship (B37A), USS Prometheus NX-59650 (25), USS Phoenix NCC-65420 (112), Federation Attack Fighter (68), USS Excelsior NCC-2000 (8), USS Appalachia NCC-52136 (54), UES Warp Delta (82), USS Equinox NCC-72381 (15), SS Emmette (124), and USS Bozeman NCC-1941 (120) were scheduled for a 2021 (re-)release in this format. That intent however, became thwarted by the COVID-19 pandemic which necessitated worldwide lock-downs, meaning the cancellation of every convention as well. The Titan re-release became one of only two realized, but was not able to reach market because of the lock-downs.[94] The other realized planned release concerned the 500-copy Pralor warship model-only convention exclusive.[61]

Collector's XL Editions[]

In 2020, the company began to re-release a number of its most popular XL Edition starship models as the Best of the Star Trek: The Official Starships Collection XL Edition, which transitioned to Collector's XL Edition in the following year.

In new "retail-friendly" premium boxes made of thicker cardboard (and the models within held in black foam), lifting the magnetic clasps and opening the gatefold on the box's front allows the model to be displayed (in a windowbox) while still packaged.

A downscaled version of the magazine (measuring 227 × 155 mm) with identical contents to the XL Edition (as is detailed above) is included with each model and is stored (and retailed) within the box behind the ship.

Gift premiums[]

Official Starships Collection Gifts logo

Gift premiums (known here as "loyalty gifts") are sent to subscribers and include a binder able to hold sixteen magazines (afterwards becoming the regular, standard binder for sale at the company's webstores), a polyresin USS Enterprise-D dedication plaque, a three-nacelled Future USS Enterprise-D model, and a battery-powered, LED-illuminated PVC Borg Cube. An enamel starship pin was added as a gift in June 2018, which was superseded by a pair of steel bookends in September 2018. [95]

In Japan, early subscribers received a unique, smaller, LED-illuminated PVC Borg Cube after De Agostini, the magazine's local publisher, "declined" to release the UK version of the Borg Cube and manufactured its own. De Agostini also released a key ring as a gift, in lieu of the UK's free magazine binder.

Initially advertised as subscriber "exclusives", the UK version of the Borg cube, the USS Enterprise-D plaque, and the Future USS Enterprise-D model were later retailed to the general public through company webshops. Magazines were not included with these starship models.

No. Premium Photo Lng* Scale
1 Steel Starfleet and Klingon Empire insignia bookends [96] GNC bookends
1 USS Enterprise NCC-1701-D pin [97] Eaglemoss Fansets USS Enterprise-D pin 57 mm
2 Magazine binder[98] Eaglemoss Star Trek binder 300 mm
2 † USS Enterprise Command Division (TOS) key ring De Agostini Star Trek key ring 45 mm
3 USS Enterprise NCC-1701-D Dedication Plaque Eaglemoss USS Enterprise-D dedication plaque gift premium 216 mm 1:1.6
4 Future USS Enterprise NCC-1701-D ("All Good Things...") Eaglemoss Future USS Enterprise-D AGT gift premium 139 mm 1:4610
5 Borg Cube Eaglemoss Borg Cube gift premium 150 mm³ 1:20403
5 † Borg Cube De Agostini Japan Borg Cube gift premium 80 mm³ 1:38000
6 ‡ USS Enterprise lapel pin Eaglemoss USS Enterprise lapel pin 57 mm
Scaling, size, and contents info, cover scans, and some graphics courtesy of Wixiban.com [103]
*Starship length as measured from bow to stern, where applicable.
Japan early subscriber exclusive
UK subscriber gift released upon the publication of Standard Edition issue 160

Starship dedication plaques[]

Official Starships Collection Dedication Plaques logo

Painted, scaled, metallic polyresin starship dedication plaques are made available through company webshops and retail outlets, and were designed by Michael Okuda. In late 2018, the company indicated that a "few more" dedication plaques were being planned.

The first release was initially distributed to subscribers as a gift premium.

Commencing in September 2018, US subscribers who opt for a "Platinum" subscription will receive a plaque every ten issues, for an additional ongoing fee.

No. Packaging Title Plaque Lng Scale
(1) Eaglemoss USS Enterprise-D Dedication Plaque packaging USS Enterprise NCC-1701-D Dedication Plaque

01/08/2015

Eaglemoss USS Enterprise-D dedication plaque gift premium 216 mm 1:1.6
(2) Eaglemoss USS Voyager Dedication Plaque packaging USS Voyager Dedication Plaque

14/10/2015

Eaglemoss USS Voyager dedication plaque 216 mm 1:1.6
(3) Eaglemoss USS Defiant Dedication Plaque packaging Star Trek: Deep Space Nine USS Defiant Dedication Plaque

14/10/2015

Eaglemoss USS Defiant dedication plaque 216 mm 1:1.6
(4) Eaglemoss USS Enterprise Dedication Plaque packaging USS Enterprise NCC-1701 Dedication Plaque

01/04/2016

Eaglemoss USS Enterprise dedication plaque 253 mm 1:1.3
(5) Eaglemoss Enterprise NX-01 dedidication plaque packaging Enterprise NX-01 Dedication Plaque

01/05/2016

Eaglemoss Enterprise NX-01 dedication plaque 250 mm 1:1.4
(6) Eaglemoss USS Enterprise-E dedication plaque box USS Enterprise NCC-1701-E Dedication Plaque

01/06/2016

Eaglemoss USS Enterprise-E dedication plaque 216 mm 1:1.6
(7) Eaglemoss USS Enterprise-A plaque box USS Enterprise NCC-1701-A Dedication Plaque

11/01/2017

Eaglemoss USS Enterprise-A plaque 217 mm 1:1.6
(8) Eaglemoss USS Franklin Dedication Plaque packaging USS Franklin NX-326 Dedication Plaque

23/06/2017

Eaglemoss USS Franklin dedication plaque 224 mm

Reference books[]

Official Starships Collection Books logo

Designing Starships series[]

In October 2016, Eaglemoss Publications premiered the first volume of the Star Trek: Designing Starships series, a line of hardcover reference books that are primarily comprised of starship design articles from the Starships Collection partworks' individual magazines, combined with new artwork, charts, and expanded material.

Published under the Hero Collector imprint, second editions of the first three volumes and all subsequent books in the series were released by Eaglemoss in mass-market editions, utilizing Penguin Random House's Publisher Services division.

Vol. Cover Cover title Published Edition
1 Star Trek Designing Starships Volume One Star Trek: The Official Starships Collection: Designing Starships Volume One 10/2016 First
(1) Designing Starships The Enterprises and Beyond cover Star Trek: Designing Starships: The Enterprises and Beyond 16/10/2018 Second
2 Star Trek Designing Starships Volume Two Star Trek: The Official Starships Collection: Designing Starships Volume Two 10/2016 First
(2) Designing Starships The USS Voyager and Beyond cover Star Trek: Designing Starships: The USS Voyager and Beyond 16/10/2018 Second
(3) Star Trek Designing Starships The Kelvin Timeline Star Trek: The Official Starships Collection: Designing Starships The Kelvin Timeline 27/11/2017 First
(3) Star Trek Designing Starships The Kelvin Timeline MM Ed Star Trek: Designing Starships The Kelvin Timeline 30/04/2019 Second
(4) Star Trek Discovery Designing Starships final cover Star Trek: Discovery Designing Starships 03/09/2019 First
(5) Star Trek Designing Starships Deep Space Nine And Beyond Star Trek: Designing Starships Deep Space Nine and Beyond 24/08/2021 First

Shipyards series[]

Star Trek Shipyards Starfleet & The Federation poster

Starship size chart from box set

Star Trek: Shipyards, subtitled The Encyclopedia of Star Trek Ships, is a mass-market hardcover reference book series that presents an "in-universe" chronological history of canon starships, and is published by Eaglemoss Collections through Penguin Random House's Publisher Services division, under its Hero Collector imprint. Starships from the alternate reality (Kelvin Timeline) and TAS are not covered in this series, and ships seen only on displays will not be incorporated.

Volumes are principally comprised of starship profile articles produced for the Starships Collection partworks, combined with new artwork, charts, and expanded material. The series was characterized by Ben Robinson as an effort to create "an equivalent of Jane's Fighting Ships for Star Trek". [104] [99]

A Special Edition of the first volume included a model of the USS Enterprise from (Standard Edition) issue 50 of the Starships Collection. [105]

In Japan, the first editions of the first two volumes were published by De Agostini and carried its imprint on the covers. The Books-A-Million Edition of these two books bore variant covers and were exclusively retailed by the American bookshop chain, Books-A-Million. Polish editions of these books were also published by HarperCollins Publishers.

A second edition of the second volume incorporates ships from Star Trek: Lower Decks, Discovery, and Picard.

A "limited edition" three-volume box set included a specially-designed slipcase, a fold-out starship size chart (a 35 × 25-inch poster), and the first, second, and fourth books of the series. [106]

The fifth and sixth volumes explore almost every Borg vessel and starship seen in the Delta Quadrant, and the company has created new CG starship models for many of the VOY ships that were solely created as practical (physical) studio models. [107]

The seventh, eighth, and ninth volumes would have covered major races and ships from the Alpha, Beta, and Gamma Quadrants. The August 2022 bankruptcy of Eaglemoss meant that only the seventh title saw an actual release.

Vol. Cover Cover title Published Edition
(1) Star Trek Shipyards Starfleet Ships 2151-2293 Star Trek: Shipyards - Starfleet Ships 2151-2293 25/09/2018 First
(1) Star Trek Shipyards Starfleet Ships 2151-2293 model edition Star Trek: Shipyards - Starfleet Ships 2151-2293 25/09/2018 Special
1 Star Trek Shipyards Starfleet Ships 2151-2293 Japanese edition Star Trek: Shipyards Vol. 1 - Starfleet Ships 2151-2293 17/10/2019 Japanese
(1) Star Trek Shipyards Starfleet Ships 2151-2293 Polish edition Star Trek: Statki - Gwiezdnej Floty 2151-2293 06/05/2020 Polish
(2) Star Trek Shipyards Starfleet Ships 2294 to the Future cover Star Trek: Shipyards - Starfleet Ships 2294-The Future 13/11/2018 First
(2) Star Trek Shipyards Starfleet Ships 2294 to the Future Books-A-Million edition Star Trek: Shipyards - Starfleet Ships 2294-The Future 13/11/2018 Books-A-Million
2 Star Trek Shipyards Starfleet Ships 2294 to the Future Japanese edition Star Trek: Shipyards Vol. 2 - Starfleet Ships 2294 to The Future 17/10/2019 Japanese
(2) Star Trek Shipyards Starfleet Ships 2294 to the Future Polish edition Star Trek: Statki - Gwiezdnej Floty Od 2294 Do Przyszłości 14/10/2020 Polish
(2) Star Trek Shipyards Starfleet Ships 2294 to the Future 2nd ed cover Star Trek: Shipyards - Starfleet Ships 2294-The Future 24/08/2021 Second
(3) Star Trek Shipyards Klingon Fleet cover Star Trek: Shipyards - Klingon Fleet 04/06/2019 First
(4) Star Trek Shipyards Federation Members final cover Star Trek: Shipyards - Federation Members 19/11/2019 First
N/A Star Trek Shipyards Starfleet and the Federation Box Set Star Trek: Shipyards - Starfleet & the Federation Box Set 19/11/2019 Vols. 1, 2, 4
First
(5) Star Trek Shipyards The Borg and Delta Quadrant Akritirian to Krenim final cover Star Trek: Shipyards - The Borg and Delta Quadrant: Akritirian to Krenim 08/04/2021 First
(6) Star Trek Shipyards Delta Quadrant Ledosian To Zahl Star Trek: Shipyards - Delta Quadrant: Ledosian to Zahl 10/08/2021 First
(7) Star Trek Shipyards - Alpha Quadrant and Major Species Acamarian to Ktarian Star Trek: Shipyards - Alpha Quadrant and Major Species: Acamarian to Ktarian 14/12/2021 First
Canceled due to the July/August 2022 Eaglemoss bankruptcy
(8) Star Trek Shipyards - Alpha Quadrant and Major Species Lysian to Romulan Star Trek: Shipyards - Alpha Quadrant and Major Species: Lysian to Romulan 17/05/2022 (planned) First

Illustrated Handbook series[]

The first volume of the mass-market hardcover Illustrated Handbook reference series comprehensively explores the USS Enterprise NCC-1701-D starship and its history, technology, and crew, incorporating updated and expanded content from the Star Trek Fact Files, alongside some new material and artwork. [108]

A Special Edition of the first book includes a starship model (from the first Standard Edition issue of this partwork), and both editions were published by Eaglemoss Collections through Penguin Random House's Publisher Services division under its Hero Collector imprint. [109]

The second volume features the USS Enterprise and USS Enterprise-A, as they were seen in The Original Series, Discovery, and feature films. [110] A model of the USS Enterprise NCC-1701-A (from Standard Edition issue 72) is included with the Special Edition.

A third volume focuses on the USS Voyager and was slated for release in two editions but its Special Edition (with a model of the ship from Standard Edition issue 6) was "postponed indefinitely" before publication.

The fourth volume covers the Deep Space 9 space station, the USS Defiant, and the Danube-class runabouts from Star Trek: Deep Space Nine.

Many fans consider this series to be the contemporary successor to Pocket Books' acclaimed Star Trek: The Next Generation and Star Trek: Deep Space Nine Technical Manuals from the 1990s.

Vol. Cover Cover title Published Edition
(1) Star Trek TNG The USS Enterprise NCC-1701-D Illustrated Handbook final cover Star Trek: The Next Generation: The USS Enterprise NCC-1701-D Illustrated Handbook 07/09/2019 First
(1) Star Trek TNG USS Enterprise NCC-1701-D Illustrated Handbook with Collectible Star Trek: The Next Generation: The USS Enterprise NCC-1701-D Illustrated Handbook 07/09/2019 Special
(1) Star Trek TNG Illustriertes Handbuch - Die U.S.S. Enterprise NCC-1701-D Star Trek: The Next Generation: Illustriertes Handbuch: Die U.S.S. Enterprise NCC-1701-D 06/09/2021 German
(2) Star Trek USS Enterprise NCC-1701 & 1701-A Illustrated Handbook Star Trek: The USS Enterprise NCC-1701 & 1701-A Illustrated Handbook 15/10/2019 First
(2) Star Trek USS Enterprise NCC-1701 and 1701-A Illustrated Handbook with collectible Star Trek: The USS Enterprise NCC-1701 & 1701-A Illustrated Handbook 15/10/2019 Special
(3) Star Trek Voyager NCC-74656 Illustrated Handbook Star Trek: The USS Voyager NCC-74656 Illustrated Handbook 14/07/2020 First
(4) Star Trek Deep Space Nine Illustrated Handbook final cover Star Trek: Deep Space Nine Illustrated Handbook 09/02/2021 First

Comic book[]

Star Trek Year Five issue 6 cover Eaglemoss NYCC 2019 Star Trek Year Five issue 6 cover Eaglemoss NYCC 2019 autographed
IDW's Star Trek: Year Five Issue 6

A limited edition of 1,000 copies of IDW's Star Trek: Year Five Issue 6 comic book featured artwork and photography by Nils Walter Khan on its cover, and showcased the XL Edition model of the USS Enterprise.

The comic book debuted at Eaglemoss/Hero Collector's New York Comic Con booth in October 2019, where writer Jody Houser, "showrunners" Collin Kelly and Jackson Lanzing, and cover artist Khan autographed covers for convention attendees. [111] Additional autographed copies were also retailed at later conventions and through company webshops.

Eaglemoss/Hero Collector also retails the Star Trek Graphic Novel Collection partwork, which comprehensively republishes many of IDW's Star Trek titles and a wide range of comics from other publishers.

Non-regular magazine binders[]

Official Starships Collection Binders logo

The gift premium binder, listed above, became the regular, standard Collection magazine binder marketed on the company's webshops.[98] Additional "limited edition" binders with "Federation" and "Alien" starship illustrations on their covers have later been made available at a higher price point to supplement the standard binder design.

Originally released as a "limited edition" exclusive in December 2014, a "Federation & Alien" binder featuring a silver foil Star Trek logo (left) was only retailed for a brief period and did not reappear (on the US shop) until 2021.[100] The separate "Federation" (center) and "Alien" (right) binders, the other "limited edition" releases, later became available from company webshops on an ongoing basis.

When the smaller sized 145 × 183 mm magazine format was introduced for the "Collector's," and post-2020 issues of the "Bonus Editions" sub-collections, a new binder capable of holding the smaller-sized magazine format became required. However, this new binder was never marketed by Eaglemoss while it was still in business – though collectors could have made do with the similarly-sized Online Collection binder which had been released. It was only after the 2022 bankruptcy that new remainder stock owner Master Replicas discovered that the new format binder had just entered production for retail dissemination when the bankruptcy occurred. A small stockpile of these binders of about 60 copies was uncovered, and ultimately sold by them in September 2023.[77][112]

Marketing[]

UK and German test marketing[]

Originally identified as prospective product line during market research for (predecessor company) GE Fabbri's short-lived Star Trek: The Figurine Collection, the first five Starships Collection issues were test-marketed at retail in England's south-west region beginning in May 2012 with selected regions in Germany – Star Trek's biggest market after the US and UK – to follow, and the company's website began to solicit UK and German subscriptions. Due to unexpected heavy demand and the resulting production and distribution challenges, new subscriptions were suspended at the end of July 2012. As commonplace, the test issues were accompanied by local TV ads in the selected UK and German testing regions.

Upon receipt of the first five issues, subscribers were advised that the magazine had been suspended and that confirmation of forthcoming issues from the publisher was pending. Gift premiums were not distributed to subscribers. This type of early "test release" is a common practice for partwork publishers, in order to gauge public interest.

UK and Ireland marketing[]

In September 2012, a Facebook page was established for the magazine and Eaglemoss subsequently announced that a full UK roll-out of the line was slated for February 2013. New subscriptions resumed on 17 September 2012 and the company confirmed that gift premiums and more issues were forthcoming. Residents of the Republic of Ireland were added to the UK subscriber base in early 2013.

At the very inception of the project, a production run of fifty issues was foreseen, [113] but by the time the project was gearing up for its initial run, the company increased that number to seventy issues and displayed a "provisional list" of ships at the Destination Star Trek London convention in October 2012. A large number of additional issues have been identified by company representatives through social media and interview podcasts.

On 9 January 2013, the company announced that the line would be indefinitely placed on hiatus until a new manufacturer was found, following the closure of their contracted production facility by Chinese authorities.

Starship models produced with the toolings and paint masks from the closed factory subsequently appeared in large-volume online auctions from Hong Kong. The two USS Enterprise-D models were later dubbed "Shadyprise" variants by collectors, due to their somewhat shady origin. Notably, the early Klingon Bird-of-Prey, USS Enterprise-D and Future USS Enterprise-D models feature paintwork that differs markedly from the official releases.

In early April 2013, Eaglemoss sent emails to subscribers stating that the magazine was back in production at a new factory and indicated that shipping would resume in August 2013. This re-launch date was confirmed on the line's newly redesigned website in May 2013 and the first issue was re-released on 21 August 2013.

The Standard Edition-sized starship models are produced in "box scale", designed to fit within a standardized box size for sale at a common price point. The boxes for almost all of these starships (the Standard, Bonus and Shuttlecraft issues) measure 168 × 127 × 51 mm. Smaller (and taller) boxes (measuring 123 × 101 × 80 mm) were supplied for Standard issues 10, 58, 94, 96, 109, 127, 146, and 180, and Bonus issue 22. A larger box (measuring 176 × 176 × 80 mm) was made for the Bajoran Solar-Sailor and another (measuring 164 × 138 × 86 mm) encompassed the Xindi-Insectoid Warship. The dimensions of the boxes for the Special and XL Edition starship models vary greatly.

In all cases, the model can be easily removed from (and put back into) the box without damaging the packaging or model whatsoever. There are no holes made in the models for the stands.

In the UK and Ireland, COMAG UK distributes subscriptions through the Royal Mail while DPD (UK) and the Royal Mail distribute webshop orders. Most products are also available through specialty shops.

International marketing[]

Star Trek Official Starships Collection banners

US shop banners

Following the successful roll-out of the magazine in the UK and Ireland, Eaglemoss launched the magazine in a number of other territories worldwide, beginning in late 2013. English-language magazines distributed outside of the UK are identical to the UK releases.[101]

In Japan, the (numbered) Standard Edition issues are published and distributed by De Agostini and carry its imprint on the covers. The first six issues were retailed in 2012 in a test marketing run, similar to the initial UK five-issue test release. The subsequent regular Japanese release was marketed differently as magazine and model came standard packaged within a gatefold box, reminiscent of, but not entirely similar to, the later Collector's Edition packaging style. Like it became with the Collector's Edition, the Japanese magazine issues were released in a smaller format to fit within the box. As already stated above, the German release of the line became the only other international release that also saw a (five-issue) test run before its full launch.

John Van Citters, the Vice President of CBS Consumer Products' Product Development division at the time, supervised the production of the partwork for the licensors and formally announced the expansion of the magazine to ninety regular issues at a panel on 2 August 2014 at the Official Star Trek Convention in Las Vegas. [114]

Further extensions were announced on 11 December 2015 (to 110), 4 September 2016 (to 130), 22 September 2017 (to 150), 25 December 2017 (to 160), and 3 August 2019 (to 180).

A small number of models were manufactured with minor painting errors that were corrected during subsequent production runs. Issues affected include 1, 9, 15, 16, and shuttle issue 08.

The Collection was briefly seen in the 2018 "Star Trek" episode of the Netflix documentary series The Toys That Made Us, where it was characterized as an accurately reproduced product line from a latter-day company that is specifically aimed at adult collectors. It also opined that the line is not a toy line nor typical mass-market merchandise, as it caters to a very specific and relatively small niche in the collector market.

Eaglemoss Star Trek Official Starships Collection contests

Online contests

In many countries worldwide, products were available at the company's webshops, and through other retailers, where available. In some of the larger sized foreign markets they had also been available by subscription at first. Most products were also retailed by newsagents and booksellers, and by comics, collectibles and gaming shops affiliated with Diamond Comic Distributors. Amazon.com, Anovos, Sideshow Collectibles, ThinkGeek/GameStop, and other retailers marketed a number of releases from this partwork and its Discovery spin-off. Loot Crate also released a small number of models within its Star Trek Mission Crate subscription box line.

Incidentally, the XL, Bonus, and Special editions rarely saw translated magazines, and the German- and Japanese-language regular edition magazines were by the time of the August 2022 Eaglemoss bankruptcy the only two non-English editions left. Over the course of the Collection's release, most foreign-language magazines later switched over to English-only releases.[102]

Star Trek Official Starships Collection Issue 1, Japan Star Trek Official Starships Collection Issue 1, Japan box Star Trek Official Starships Collection Issue 1, German Star Trek Official Starships Collection Issue 1, Netherlands Star Trek Official Starships Collection Issue 1, France Star Trek Official Starships Collection Issue 1, Spain
Japanese
Japanese box
German
Dutch
French
Spanish
International editions

When Eaglemoss went bankrupt in 2022, stock held by, or earmarked for, DeAgostini Japan was not part of the bankruptcy settlements and subsequent takeover by Master Replicas contrary to the German-language stock, as it was not owned legally by Eaglemoss but by the Japanese branch of DeAgostini.

Considered issues[]

Official Starships Collection prototypes

Past prototypes

In a Q&A session on his Twitter page, project manager Ben Robinson wrote, "It's a question of economics, though. If enough people are buying, we'll keep going. We're already doing more ships than anyone ever imagined. Hurrah!"[103]

The project manager had stated that he considered every Andorian, Borg, Dominion, Kazon, Klingon, Romulan, Suliban, Tellarite, Vidiian, Vulcan, and Xindi ship to be "essential" to the collection, and aspired to produce all of the Federation ships seen on-screen.[104]

Star Trek celebrities at Eaglemoss booth

Michael Okuda, John Eaves, Anthony Montgomery, Rick Sternbach, Judy Elkins, André Bormanis, and Doug Drexler visiting Hero Collector convention booths

In October 2019, the company announced that Standard Edition (numbered) issues would conclude with the publishing of issue 180, and later outlined plans to continue to produce more Standard Edition-sized Bonus ships that would have reached market "roughly every three months", beginning around "the middle" of 2021. [115] Bernd Schneider of Ex Astris Scientia, the noted Star Trek reference website, had assisted CG modeler Fabio Passaro by providing reference material for many of these alien ships and lesser-known "ships of the week", mainly from TNG and VOY. [116] EAS and MA member Jörg Hillebrand also contributed reference material for some of these issues. [117][118]

More "extended-canon" or "soft-canon" Bonus Editions might had been produced, including newly-created models based on concept designs, and more cloaked ships are under consideration. "Battle-damaged" versions of some starships might had been made as XL Editions, while future starships from the older Star Trek films would likely had been released as Special Editions, due to the added costs of producing all-new CG models and toolings from scratch. A few Star Trek: The Animated Series ships might eventually had reached production, possibly alongside ships from later animated Trek series.

Eaglemoss Hero Collector staff on 2019 Vegas con bridge

Eaglemoss/Hero Collector staff on the bridge set at the 2019 Official Star Trek Convention

Registry, "cloaked", and gold variants might had been continued for release as convention exclusives but all new classes of starship would remain available to subscribers and retail. Robinson had indicated that the company wanted to ensure that missed con exclusives would "not be too painful" for those who could not attend, while still providing "something special" for collectors who did.

Robinson indicated that he hoped that the producers of Star Trek Beyond would allow Eaglemoss to manufacture a USS Enterprise NCC-1701-A model, something they have declined to sanction in the past due to uncertainty about its future appearance.

Eaglemoss had been hoping to produce the classic starship designs created by Franz Joseph as models, and has indicated that his estate had been engaged in negotiations with CBS.

Eaglemoss XL USS Cerritos

XL Edition USS Cerritos

The company had revealed that the USS Cerritos, USS Titan, and USS Vancouver would be forthcoming models and confirmed that its Star Trek: Lower Decks starships line would debut at retail in January 2022. Robinson also indicated that the company would manufacture starships from Star Trek: Section 31 and Star Trek: Prodigy. [119][120] [121][122]

Remaining unreleased issue from 2012 convention list[]

Star Trek Official Starships Collection poster

2012 UK promo poster

Remaining ships from 2012 promotional poster[]

Additional possible Bonus Editions identified on social media[]

Eaglemoss Think Tank Vessel

Think Tank vessel

Additional possible Bonus Editions from February 2019 survey[]

Additional possible Special or XL Editions identified on social media[]

† Developed but eventually not considered for production
* Not released as such exactly, but released as variants derived from the same production model, to wit the Hierarchy Assault Vessel (2022) and the Tarellian Starship (2020) respectively.
‡ Planned for a 2022 release, but eventually cancelled due to the 5 August 2022 Eaglemoss bankruptcy.

Related partworks[]

Star Trek Discovery The Official Starships Collection logo

Star Trek: Discovery The Official Starships Collection[]

Star Trek Discovery Official Starships Collection ship promos

In January 2018, Eaglemoss/Hero Collector launched the Star Trek: Discovery The Official Starships Collection partwork, a monthly spin-off publication that features starships from the Star Trek: Discovery series.

The starship models measure from about fifteen to twenty-five centimeters in length, comparable to many of the Special Editions from this collection. Larger "Special Edition" DIS starship models, similar in size to the "XL Edition" models released in this partwork, have also been produced.

As is detailed above, XL Edition models of the USS Enterprise (as it appeared in Discovery), the USS Shenzhou, and the USS Discovery were also released in this collection, following their release as smaller models in the DIS partwork. A USS Discovery-A refit model is also planned for this line.

In October 2020, the company announced that its forthcoming starship miniatures from DIS (after numbered issue 33), PIC, and SNW would be combined into a new product line, [123] which was subsequently identified as the Star Trek Universe: The Official Starships Collection. (see below)

Star Trek TNG Build The USS Enterprise-D logo

Star Trek: The Next Generation Build The USS Enterprise NCC-1701-D[]

Star Trek TNG Build The USS Enterprise NCC-1701-D model details

In March 2021, the company launched the Star Trek: The Next Generation Build The USS Enterprise NCC-1701-D partwork, a new line featuring a seventy centimeter-long electronically-lit model of the USS Enterprise 1701-D.

Subscribers construct the die-cast metal and ABS model over 120 kit "stages", and typically receive four kits (sent together) each month. A magazine containing the relevant assembly instructions, some feature articles, and a TNG episode guide accompanies the model parts.

Art prints and die-cast models of the ship's shuttles (in Standard Edition size, as above) are also produced as Special issues of the partwork. [124]

Star Trek Online Starships Collection[]

Star Trek Online logo, large
Star Trek Online Starships Collection starship models

On 6 June 2020, the company debuted the Star Trek Online Starships Collection, a new partwork featuring four to six-inch die-cast metal and ABS starships, similar in size to the Standard Edition models from this series.

This collection exclusively presents starships from Star Trek Online, the massively multiplayer online role-playing game.

After launching with ten, the company announced that the series would be extended to twenty issues in July 2020. On 10 August 2021, project manager Ben Robinson announced that the line would conclude following the release of the twentieth issue, due to an insufficient response at retail. [125]

Developed from a design originally commissioned for the game, Eaglemoss has previously manufactured two starship miniatures (in two distinct liveries) of the USS Enterprise NCC-1701-F (β) as Bonus Editions within the first Starships Collection, as is detailed above.

Star Trek Universe Starships Collection logo

Star Trek Universe: The Official Starships Collection[]

Eaglemoss Star Trek Picard starships

The Star Trek Universe: The Official Starships Collection partwork and product line premiered in March 2021.

Each issue includes a (roughly) six to ten inch-long (150 to 250 mm-long, similar in size to Special Editions from this partwork) die-cast metal and ABS scaled starship replica from Star Trek: Picard and/or Star Trek: Strange New Worlds, and the line will later serve as a continuation of the Star Trek: Discovery The Official Starships Collection.

Larger Special Edition models may also be produced for the Universe series, though a number of XL Edition ships from DIS, PIC, and SNW will continue to be released in this partwork.

Gallery[]

Appendices[]

Interactions with live-action Star Trek[]

aA copy of the Promellian Battle Cruiser model (Regular issue 142) was sent by Ben Robinson to Star Trek: Picard's Production Designer Dave Blass for a ship in a bottle set decoration that first appeared as a Château Picard fireplace mantel display piece in the Season 2 trailer, [126] like it was in the episode "The Star Gazer", while making an additional appearance in the episode "Hide and Seek" as part of a childhood memory of Jean-Luc Picard. [127]
Designed by series' prop master Jeffrey Lombardi, the 11.5×6×5 inches measuring ship-in-a-bottle model prop turned up later at auction as Lot #178 in Prop Store's 15-29 November 2022 Star Trek: Picard Seasons 1 & 2 Online Auction, eventually selling on 29 November for US$9,375. [128]

bAfter the above-mentioned canon appearance of the regular issue Promellian Battle Cruiser model in "The Star Gazer", three more Eaglemoss display models from the "Special Edition" side collection also made an appearance in Picard's childhood memories in the "Hide and Seek" episode alongside the Promellian Battle Cruiser model, which made an encore in the episode; The first one concerned the NX-class refit model (issue SP06) – in the process making the hitherto apocryphal design canon as well – whereas the two other ones concerned the Deep Space Station K-7 (issue SP10), and Regula I (issue SP24) models. A fifth additional Eaglemoss model that was featured concerned issue 11 from the XL Edition sub-collection, that of the Discovery retcon-Enterprise which was seen on the top shelf of the same display where the two space station models were also displayed in. Each of the four additional Eaglemoss models were featured non-modified.

Footnotes[]

  1. The models were painted freehand and with the use of paint masks (templates), alongside pad and tampo printing processes, while electro-plating is employed for the 18k gold-plated Enterprise-D release. The earliest prototypes are 3D printed in resin and, once approved by Eaglemoss and CBS, were manufactured using a variety of injection, vacuum, and compression molding techniques. [1]
  2. Ben Robinson had previously used live-action production CGI studio models to create illustrations for other licensed Star Trek print publications, in the process becoming, at least where the Star Trek franchise was concerned, a pioneer by doing so. He commissioned Rob Bonchune (and others) to render these models for use in the Star Trek Fact Files and its US magazine derivative. Robinson served as project manager, editor and writer of many issues of those publications (incidentally published by one of Eaglemoss Collections' two original constituent parts, GE Fabbri), foreshadowing his similar role at the Official Starships Collection.
    Regarding the availability of production-used digital models, Robinson has stated, "There is an excellent archive of ships from Voyager and Enterprise. Less so with the other shows." [2] To alleviate this shortage of models, Robinson solicited the input of former Digital Muse Effects Supervisor David Lombardi, who turned out to still have a partial database of digital models that Digital Muse had specifically constructed for Deep Space Nine. [3] [4] Years earlier, Lombardi had constructed a digital model of the Enterprise-E as Digital Muse's solicitation model for possible use in Star Trek: Insurrection, and it was his model that was used for the orthographic views in issues 21 and XL3 of the Collection, alongside the beauty views of the later Star Trek Nemesis version created by Digital Domain. (See: Sovereign-class model)
  3. Ben Robinson stated that he wrote the first magazines of this partwork in their entirety.
  4. Some of the designers' background art and material about starship design is based on archival material, and may have been previously published in the Fact Files and its derivatives.
  5. As identified online, Rob Bonchune has created 3D starship models and/or renders for issues 4, 10, 23, 24, 26-28, 30-32, 34, 37, 38, 40, 41, 48, 50, 55, 57, 60, 63, 65, 67, 71, 88, 93, 94, 98, 99, 102, 115, 117, 134, 154, 155, XL1, XL4, XL8, and Shuttlecraft Set 1. [5]
  6. CG models that Fabio Passaro's Meshweaver Productions has provided for the Collection, as identified online, include issues 12 (not a new build, but a re-rendered version of the Digital Muse model), 14, 20, 47, 54, 56, 61, 64, 73, 75, 79, 80, 85, 86, 91-93, 95, 96, 100, 104, 105, 108, 110, 114, 116, 118, 120, 122, 126, 127, 138, 143, 159, 161, M1, SP3, SP4, SP5, SP7, SP9, SP11, Bonus issues 05, 07, and 11, and Shuttle issues 05, 13, 14, 15 and 16. [6]
  7. Praised by Lebowitz for their high level of detail, Ed Giddings' pre-existing Centaur and Excelsior models, constructed for the canceled 2000 Unseen Frontier reference book project, were deemed as quite suitable for use in the Official Starships Collection, as was his 2010 spin-off build of the refitted Excelsior-class which he had built for Bonchune's USS Enterprise Owners' Workshop Manual reference book. [7] New or replacement CG models that Ed Giddings' Cgreactor has provided for the Collection, as identified online, include issues 8, 40, 42, 46, 52, 59, 90, 98, 103, 123, SP1, Bonus issues 08 and 19, and XL issue 17.
  8. Magazine PDF versions of most of the main and sub collections can be found at Wikiban.com.
  9. Though some Standard Edition-only subscription services had initially been offered to international customers in those countries that had a dedicated Collection website, most were prematurely terminated due the early closure of these websites, leaving only the UK and north-American subscription services in place in the end. Only open to UK inhabitants for this collection at first, the service was eventually extended to selected categories of non-UK inhabitants, typically those from continental EU countries, for the Discovery and Universe follow-up starships collections as well.
    In hindsight, it became clear that the overall 2020 termination of subscription services for the Standard Edition was actually intended as a desperate cost-saving measure by the soon-to-be-bankrupt Eaglemoss.
  10. International release dates, invariably lagged behind those for the UK home maket, ranging from weeks to years in some rare cases.
    UK releases started to regularly experience delays beyond the release dates as planned by the company from early 2020 onward due to the COVID-19 pandemic and the Brexit-inspired move of the company's warehouse and distribution centre from London, UK, to Waghäusel-Kirrlach, Germany, in early January 2021. (see also footnotes of main article) It has resulted in a delay ripple effect for the international releases as well, since the UK release was leading for the others – even for Germany and the EU, somewhat ironically. The post-2020 release dates mentioned in all tables, are therefore indications of intention rather than the actual release dates. This applied to all partwork releases by the company.
  11. The cover of the XL Edition of the Akira-class gives a different "real" ship length of 440 meters long rather than 464.43 meters, resulting in a scale of 1:3667.
  12. The "real" Solar-Sailor's length is given as 49 meters on the Starfleet & the Federation scale chart included with the Star Trek: Shipyards - Starfleet & the Federation Box Set, and was published in late 2019. Scale was calculated from this figure, courtesy of Wixiban.com [8]
  13. The magazine states that the size of the Prometheus is 126 m (used for scaling here) but other sources (and its onsceen appearances) indicate that a more appropriate size for the ship is 415 m [9], placing the scale at 1:2964. Courtesy of Wixiban.com [10]
  14. Scaling is based on an estimate of the armored Voyager set at a length of 360 metres (a 5% increase from the standard hull configuration), courtesy of Wixiban.com. [11]
  15. The magazine states the size of the Bajoran Raider is 33.1 m (used here for scaling) but other sources (and on-screen appearances) indicate that a more appropriate size for the ship is 8.5 m [12], placing the scale at 1:71. Courtesy of Wixiban.com [13]
  16. The original studio model of the Academy trainer craft bore a (too small to be seen on-screen) Cobra logo (from G.I. Joe) as a nose marking. Hasbro, the owner of this design, "declined" Eaglemoss' request to use it for the starship model so a Red Squad logo was substituted.
  17. The dimensions of the Borg Queen's ship are not stated in the magazine. Scale is based on a length/beam of 820.4 m, as published in the Star Trek: Starship Spotter reference book.
  18. The remastered Eymorg ship's scale is based on an estimated length of 10 meters. Courtesy of Wixiban.com. [14]
  19. The scale of Arctic One was based on the magazine's cover which stated the ship's length was 80 meters. As the assimilated version of the vessel is also deemed by the earlier magazine to be the same length, this version would be more appropriately sized at 60 meters, placing the scale at 1:480. Courtesy of Wixiban.com. [15]
  20. The length of the Warship Voyager was not stated in the magazine so it was estimated at 348 meters long. Courtesy of Wixiban.com. [16]
  21. A more appropriate length for the "real" Vaadwaur Fighter appears to be about 24 meters, placing the scale at 1:209. However, the stated length from the magazine was used here.
  22. According to a scale chart later created by the show's VFX supervisors, the Federation Tug is approximately 66 meters long, placing the scale at 1:733. [17] However, the stated length from the magazine was used here.
  23. Although the magazine cover states that the "real" T'Pau is 470 meters long, the 142.5 meter length printed on the poster included with Eaglemoss' Star Trek: Shipyards - Starfleet & the Federation Box Set was used for scaling here, as it appears to more accurately reflect the ships seen on-screen. Courtesy of Wixiban.com. [18]
  24. The Fesarius' scale was based on an estimated diameter of 2,080 meters. The magazine's cover states the "real" vessel's diameter is "more than 1.6 km". Courtesy of Wixiban.com. [19]
  25. As the lengths of the "real" USS Excelsior concept designs are not stated in the magazines, scale was based on the final ship's length of 467 meters. Courtesy of Wixiban.com. [20]
  26. The size of the "real" D'Vahl is not stated in the magazine so scale was based on an estimated length of 30 meters. Courtesy of Wixiban.com. [21]
  27. The sticker on the base of the Nebula-class USS Melbourne model's stand has "USS Nebula (Prototype)" printed on it.
  28. Like the other Nebula class variants, the USS Melbourne's magazine states that the "real" ship is 442.23 meters long, placing the scale of this model at 1:3810, which is used here. However, due to the ship's extended hull and other configuration differences, Ex Astris Scientia's estimated length of 535 meters would more appropriately set the scale at 1:4612. [22]
  29. As the lengths of the "real" USS Excelsior concept designs are not stated in the magazines, scale was based on the final ship's length of 467 meters. Courtesy of Wixiban.com. [23]
  30. Scale was based on an estimated length of 150 meters for the "real" Orion Interceptor. Courtesy of Wixiban.com. [24]
  31. Scale of the Concept III model was calculated using the (final) "real" USS Excelsior's length of 467 meters. Courtesy of Wixiban.com. [25]
  32. The scale of the Karemma starship model was calculated using the Star Trek Fact Files' stated length of 380 meters for the "real" ship, as the ship's length was not provided in the issue. Courtesy of Wixiban.com. [26]
  33. Erroneously, the sticker on the bottom of the Tamarian Deep Space Cruiser model's stand has "Karemma Starship" printed on it. A corrected sticker was sent to UK subscribers with issue 175.
  34. A design chapter is listed for pages 10-11, which however, is not featured in the magazine.
  35. Kes' "real" shuttle was estimated as 30 meters long for scaling purposes by Wixiban.com, the length of a previous incarnation of the ship when it appeared in 'Drive', as the ship's length was not provided in the magazine. [27]
  36. The "real" Denobulan Medical Ship was estimated as 23 meters long for scaling purposes by Wixiban.com, as the ship's length was not provided in the magazine. Courtesy of Wixiban.com. [28]
  37. The "real" Xindi-Insectoid Scout was estimated as 140 meters long for scaling purposes by Wixiban.com, based on a concept drawing in the magazine, as the ship's length was not provided in the issue. [29]
  38. Courtesy of Wixiban.com, the scaling of Archer's "real" toy ship was calculated using an estimated length of half a meter, as information about the toy's dimensions was not provided in the magazine. The "real" spaceship that the "in-universe" toy ship was based upon was estimated by Wixiban at 18 meters long, which would place the scale of the Eaglemoss replica at 1:200. [30]
  39. As no information is included in the magazine, the scale of the Vidiian Starship model was calculated using a length of 500 meters for the "real" ship, as estimated by Ex Astris Scientia. [31]
  40. The company has created new CG models for the Bonus Edition fleet ships from the Kelvin Timeline because the films' producers could not locate some of the original CG files within their archives.
  41. The Bonus Edition issue numbers and sequence shown here were provided by Eaglemoss UK in October 2019, are substantially revised from earlier versions, and do not necessarily list the ships in the order of actual release.
  42. The Future USS Enterprise-D model was first released on 28 November 2013 as a gift premium for subscribers and later became available to the general public exclusively from company webshops. A magazine was not included.
  43. A model of the apocryphal SS Yorktown model premiered at the New York Comic-Con and the Destination Star Trek Europe conventions in October 2016. [32](X) Subscribers were able to purchase it at a discount [33](X) and some remaining "limited stock" was retailed as a webshop exclusive. [34](X) [35](X) In total, 5,000 models were produced as a limited edition and a magazine was not included.
  44. Following a successful online fan petition championed by The Trek Collective and Geekology, [36](X) models of the USS Titan (which primarily appears in Star Trek novels, video games and calendars, but made its first canon appearance in the Star Trek: Lower Decks episode "No Small Parts") were produced. The original CGI model was designed by Sean Tourangeau and constructed by Ellery O'Connell, but the model was modified by Fabio Passaro for this collection. Project Manager Ben Robinson has later divulged that the Titan was considered an important release for Eaglemoss, as it was at the time the very first non-canon ship they released in the "Bonus Edition" side-collection. [37] Robinson had indicated at the time that, like with the preceding Yorktown issue, 5,000 copies was the minimum pre-sale number required for any petition to be successful, which was apparently achieved. [38] Unlike the preceding Yorktown issue, a magazine was now included.
  45. Following a successful online fan petition championed by The Trek Collective and Geekology, [39](X) models of the USS Aventine (which primarily appears in Star Trek novels, video games and calendars) were produced. The ship saw a very limited retail release, outside of Eaglemoss sources. The CGI model was constructed by the ship's designer, Mark Rademaker.
  46. Andrew Probert's USS Enterprise-C concept design appeared (in profile) in a six-ship relief sculpture of vessels named USS Enterprise, displayed on a wall in the USS Enterprise-D's observation lounge.
  47. The scale of the USS Enterprise-C Probert concept model was calculated using Andrew Probert's scale chart, indicating that that the "real" ship was intended to be 1721 feet (or 525 m) long. [40] This information was not stated in the magazine.
  48. The length of the "real" Phase II USS Enterprise is not stated in the magazine so scale was calculated using Kennedy Shipyards' specifications, placing the length of the ship at 301.55 m. [41] Designed for use in Star Trek: The Motion Picture, Andrew Probert lengthened the Enterprise refit to a thousand feet (304.8 m), "just a few feet longer than it was", in reference to Matt Jefferies' Phase II ship dimensions. Computer screens also displayed the Phase II Enterprise design in the first two Star Trek films. (Designing a refit-Enterprise for Phase II)
  49. The USS Defiant model features phosphorescent paintwork to simulate the starship's appearance when it became trapped in Interphase. Chronologically, it was the seventh Bonus issue released but it is identified as the tenth in Eaglemoss' catalogs.
  50. Scale of the "real" Voyager concept ship was based on a length of 1,250 feet (381 m), as stated by Rick Sternbach on the Unofficial STSS Facebook page on 28 September 2018. [42]
  51. Following a successful online fan petition championed by The Trek Collective and Geekology, [43](X) models of the USS Bonaventure, which originated in the 2006 Ships of the Line calendar and its book derivatives, were produced. The CGI model was constructed by the ship's designer, Meni Tsirbas.
  52. The length of the "real" Bonaventure is not stated in the magazine so scale was based on an estimate of 265 meters. Courtesy of Wixiban.com. [44]
  53. Both Enterprise-F models included an A5-sized printed insert bearing a code for a free Tier-5 Odyssey class (β) tactical cruiser and exclusive Ship Material and Ship Upgrade tokens for the Star Trek Online PC game. The magazines contain the same content but have different covers.
  54. A limited edition of 2500 cloaked (translucent resin) USS Defiant models debuted on 3 October 2019 at the New York Comic Con, and was also retailed on the 25th of the month at the Destination Star Trek convention in Birmingham, England. A smaller magazine (measuring 144 × 182 mm) is included within its windowbox package. [45][46][47](X)
  55. The length of the "real" Conestoga is not stated in the magazine so scaling was based on an estimated length of 211 meters. Courtesy of Wixiban.com. [48]
  56. The length of the "real" Klingon D4 concept is not stated in the magazine so scaling was based on an estimated length of 145 meters, equal to that of the Klingon Raptor. Courtesy of Wixiban.com. [49]
  57. The diameter of the "real" Cardassian orbital weapons platform was not stated in the magazine and was estimated at 120 meters. Courtesy of Wixiban.com. [50]
  58. Tiny hull markings painted on the outer rim of the USS Reliant Concept's saucer (and behind its bridge) identify the model as the "USS Antares", whereas its other hull markings are correct (for Reliant).
  59. Starting in 2021, the Bonus Edition side collection dispensed with the packaging format of the standard edition which had just been suspended perminently previously, and went hencefort with the Collector's Editions packaging and magazine format from issue 26 onward as standard.
  60. 60.0 60.1 60.2 60.3 All scheduled, but cancelled Eaglemoss issue releases had already entered regular production when the company went bankrupt and commercial quantities in the 500/2000-copy range of the display model at least had actually been produced by the manufacturer in China before production had to cease. [51][52] They were acquired from the administrators by (new) Master Replicas along with the regular remainder stock, and sold to the public after all through their webstore, starting in April 2023 with the XL edition of the USS Stargazer and the regular edition of the USS Vancouver from the main and Lower Decks collections respectively, [53] several of them selling out within a day. Third-party UK and Far Eastern eBay retailers who had managed to get their hands on a handful of these unreleased Eaglemoss issues previously – and selling them at hugely inflated prices – , had already reported that these previously unreleased models came without the magazine, they apparently not having entered the regular print-run yet by the time of the bankruptcy, [54](X) a state of affairs confirmed later on by the ones marketed by Master Replicas. It turned out a short while later though, that in the cases of the unreleased Special and XL issues at least, digital magazine versions were actually completed.
    Master Replicas only included (physical) magazines if they had already been packaged with the model (which was for the previously released issues not always the case, explaining in the process the large stock of back issues), some of which in German, the only foreign language version (besides Japanese, which however fell under the auspices of DeAgostini) still being printed by the time Eaglemoss had gone bankrupt; an 100,000-copy magazine (back-)issue stock did exist at two printer-owned warehouses somewhere (possibly also holding magazines of the unreleased issues as well), but the printer refused to release them until debt owned by the bankrupt Eaglemoss was fulfilled in full. As the new formal (model) inventory owners, Master Replicas had entered into legal negotiations with the disgruntled printer and was able to resolve the issue in August 2023. [55][56][57] The sale of this magazine stock started on 26 December 2023. [58]
  61. 61.0 61.1 Originally announced as the Pralor vessel in the February 2019 survey. It was initially assumed by Master Replicas that neither model nor magazine for this issue had entered the manufacturing stage yet when Eaglemoss went bankrupt, as only a prototype model (in Pralor vessel livery) was included in an earlier batch of stock received from overseas. That prototype model became offered as a reward for the winner of an online competition Master Replicas ran on their Twitter account in July 2023. It was only afterwards that it was discovered that the model had actually entered regular production, and the company subsequently sold an uncovered 2000-copy Cravic ship variant stock on 1 September 2023. [59] Not only that, but a short while later a smaller stock of 500 Pralor warship variant models was also uncovered which had been intended as a model-only convention exclusive. It went on sale by ballot at a higher price point on 2 October with the proceeds earmarked for charity, though twenty copies turned out to have suffered transportation damage beyond salvation. [60]
  62. From the proposed 8th season of DS9 as seen in the What We Left Behind documentary and named for Emmett Till, a 14 year-old African-American boy who was lynched in 1955. Designed by John Eaves.
  63. The Special Edition Deep Space 9 model does not include a display stand.
  64. The length of the "real" USS Enterprise from the 2009 film was not stated in the magazine. The ship was designed to be 366 m long but was scaled up by a factor of two for some sequences. 725.35 m (used here to calculate scale) is the length indicated by the film's Blu-ray disc. [61]
  65. The magazine's cover states that the Kelvin is 315 m long (used here to calculate scale) but the ship was also scaled at 457.2 m and 655 m during the film's production.
  66. Diameter of K-7 is not stated in the magazine. Scale calculated using Ex Astris Scientia's estimated (approximate) diameter of 450 m. [62]
  67. Length of the USS Enterprise XCV-330 is not stated in the magazine. Scale calculated using the Star Trek Spaceflight Chronology's stated length of 300 m.
  68. The length of the Klingon Warbird is not stated in the magazine so scale was calculated using an estimated length of 350 m, as indicated by Ex Astris Scientia. [63]
  69. The "real" Kobayashi Maru's size is not stated in the magazine. Scale is based on Ex Astris Scientia's estimated length of 562 m. [64]
  70. Spacedock stands approximately 225 mm high when displayed on its stand.
  71. Scale derived from placing the "real" V'ger's length (after shedding its energy cloud) at 78,000 km, as stated in the novelization and seen in a film outtake. The magazine cover states the vessel's length is 300 million km, placing the scale at 1:1363636363636. Courtesy of Wixiban.com. [65]
  72. The Planet Killer features internal electronic lighting, requiring two LR41 button cell batteries that are not included with the model.
  73. The Planet Killer model's scale was based on an estimated "real" length of 5 km. Courtesy of Wixiban.com. [66]
  74. A full-sized magazine (with a typo in its title) was included with the 18 karat gold-plated USS Enterprise-D model that was released in the UK. The model began to be retailed by the US e-shop on 23 December 2019 but did not include a magazine when first shipped. The model is enclosed in a Standard Edition box, within a printed outer sleeve that correctly identifies the product as the "Gold Model of the USS Enterprise NCC-1701-D".
  75. The size of the "real" Vulcan Warp Sled is not stated in the magazine so scaling was based on the 48 meter length printed on the poster included with Eaglemoss' Star Trek: Shipyards - Starfleet & the Federation Box Set. Courtesy of Wixiban.com. [67]
  76. Regula I stands approximately 225 mm high when displayed on its stand.
  77. 77.0 77.1 Starting with issue 25, a fifth magazine size dimension variant was introduced for the "Special Edition" sub-collection; the magazine was downsized from the hitherto regular large A4 format to the smaller 176 × 227 mm dimension in order to fit within the box packaging, just as the similar case would be with the Bonus Edition sub-collection later that year, though at 145 × 183 mm that magazine size variant would become even smaller. Collectors found themselves confronted with another magazine size variant yet again, and one for which, unlike most other size variants introduced after the Standard Edition was terminated, no binder was ever provided.
  78. The scale of the Son'a Collector was based on a "real" ship length of 5000 feet (1524 m), based on John Eaves' concept drawing, courtesy of Wixiban.com.
  79. The Eaglemoss version of the station differs in several respects from the one featured in DS9: "Apocalypse Rising" (its only canon appearance) because of the artistic license taken with the production model; firstly, the elaborate antenna array on top is for the Eaglemoss version switched to the bottom, and secondly, a fourth, lower arm was added at the rear of the CGI model, which had never been there on the production-used studio model (see main article for further clarification), making this outing one of the most apocryphal and egregious – for a company that prides itself for its "accurate" representations of canon models, that is – renditions by Eaglemoss of a structure that has appeared in canon.
  80. Later reseller (new) Master Replicas has confirmed that this was the very last "Special Edition" issue to have entered production, with no others planned yet at that moment in time. [68](X) This model too came without a magazine – even though a digital mock-up had actually already been completed [69] – , but 1250 of them were produced before the cessation of model production. [70].
  81. The final production version of the XL USS Thunderchild model does not have the ship's name printed on the saucer, in line with the studio model's appearance in First Contact. Inadvertently, a small number of models were released (mainly to Brazil) that had purple-painted impulse engines instead of grey. [71]
  82. Scale was calculated based on the "real" Akira-class' length being placed at 440 meters, as is printed on the XL magazine's cover. A length of 464.43 meters, as is printed in the Standard Edition magazine, was not used here but would result in a scale of 1:2101. Courtesy of Wixiban.com. [72]
  83. The XL Edition Deep Space 9 model includes a display stand.
  84. The XL Edition USS Shenzhou model erroneously bears mirror universe Terran Empire markings on its nacelles, rather than Starfleet logos. Beginning with this issue, slightly smaller magazines (measuring 227 × 155 mm) were enclosed with all XL Edition models, now sized to fit within the boxes.
  85. The only time that no new render of the CG model was made for the cover; instead, the exact same render was used as the one used seven years earlier for regular issue 36.
  86. While (new) Master Replicas sold the model without the magazine, a digital magazine mock-up had actually already been completed. [73]
  87. The Limited Edition (XL) version of the 18-carat gold-plated USS Enterprise-D is identified as the "Gold USS Enterprise NCC-1701-D" on its box and the "USS Enterprise NCC-1701-D (Special)" on its stand's label. It was made available for pre-order from company webshops (with only 1000 copies available worldwide) as a convention exclusive for the New York Comic Con x MCM Comic Con Metaverse online event (8-11 October 2020), and was first shipped (in a premium "Best of" box) to US customers in January 2021 and to UK customers during the following month.
  88. The Limited Edition (XL) version of the 18-carat gold-plated USS Enterprise was made available for pre-order from company webshops (with only 500 copies available worldwide) in late April 2021.
  89. When (new) Master Replicas received its stock acquired from the Eaglemoss administrators, it was discovered that the model was produced in larger quantities than originally announced, coming in at roughly twice the number Eaglemoss said it would. [74] Master Replicas planned to sell them in two batches to the public after all through their webstore in May and July 2023, [75] though it was eventually decided to forego the two-batch sale and stick to an one-time-sale only format on 26 May after all, [76] and where it sold out within the hour. [77]
    This was the second model for which Master Replicas strictly adhered to its recent 1-copy/1-customer rule, which the company had conditionally instituted for specific items, [78] the first one having been the Enterprise-E XL3 issue. [79]
  90. The Type-7 shuttlecraft was constructed from Andrew Probert's concept design that appeared on LCARS displays, at the designer's request.
  91. The Med Evac shuttle model is marked as shuttle 43, a shuttle that didn't have a red livery in the film.
  92. In the second, third, and fourth editions of the Star Trek Encyclopedia, information about this Hawking was added to the entry about the original Type 7 Hawking while a diagram of a Type 6 shuttlecraft appeared alongside, which might explain the designation used here. Both the miniature and the full-sized shuttle used in Star Trek Generations for the Hawking were slight redresses of one of the Galileo-type shuttlecraft shuttles built for Star Trek V: The Final Frontier. The Type 6 was also originally constructed from another one of the Final Frontier shuttles.
  93. An early production run of this 2018 re-release erroneously omitted the USS Enterprise-B model and included the USS Enterprise-E model. Free replacement ships were provided to customers by the company.
  94. After the August 2022 Eaglemoss bankruptcy, (new) Master Replicas sold the stock of the Titan convention exclusive through their webstore in May 2023, divulging that a little over a 1,000 copies had been produced of this format version. [80] Ben Robinson had observed that a handful of copies had fallen into the hands of "scalpers" who sold them at hugely inflated prices on eBay. [81] Having eventually become canon in 2020 through Lower Decks though, was actually the very reason for its inclusion in the otherwise entirely canon Collector's Edition convention exclusive range.
  95. Distribution issues resulted in some subscribers receiving their gift premiums much later than the scheduled intervals indicated on the magazine's subscription sites. Nonetheless, the magazine's Terms and Conditions state that the company had the right to modify this schedule (and the gifts) unilaterally. For American and Canadian subscriptions, the gift premiums were scheduled for much later subscriber milestones than had been the case with all other territories.
  96. The bookends were previously released as a Star Trek Graphic Novel Collection gift premium and were added as gift premiums for new Starships Collection subscribers in September 2018.
  97. This enamel pin was previously released as a FanSets product and was added as a gift premium for new subscribers between June and August 2018.
  98. 98.0 98.1
    Eaglemoss Star Trek regular binder variant

    Variant standard binder

    Over the course of 2016, some customers who had a standard binder on order at the UK company webshop, were sent a variant version of the standard binder. The variant version featured differently executed cover art, and while the binding system was very similar, it was of a slightly different design, which resulted in an one centimeter wider binder spine, 7.2 versus 6.2 cm. It is not clear if the variant binder was an intended replacement for the standard binder, or the original design thereof, as this version has never been marketed or promoted. Copies of the variant version were most likely sent out by the company to some customers in order to circumvent low stock levels and/or to clear inventory of already produced copies of the now redundant variant binder.
  99. Robinson had actually been mulling over the concept as far back as 2012 when he worked on the two (Star Trek) Owners' Workshop Manuals for Haynes Publishing, "I think the logical thing to do, and I haven’t even said this to Haynes, would be a Starfleet shipyard. I’m actually working on a collection of small model Star Trek ships. We’re collecting all the different CG models together as reference and then producing die-cast scale-model ships. These ships, like the Akira or… you can get much more obscure, like the Equinox or the Prometheus… they’re a big part of what makes the franchise cool for people, and there’s been remarkably little done about them. So if Haynes come back and say, “That went really well. What do we do next?” I think that’s what I would suggest to them." [82] As it turned out, Haynes was not interested in Robinson's ideas, and what he had in mind eventually became the Eaglemoss Shipyards book series.
    In August 2020, Eaglemoss/Hero Collector released a similar shipyard book, entitled Battlestar Galactica Shipyards, that focused on spaceships from the Battlestar Galactica franchise (ISBN 1858756111), whereas a second book, Battlestar Galactica: Designing Spaceships (ISBN 1858758009), was announced for an initial release in July 2021, but which was postponed to 5 October 2021. [83] Like their Star Trek counterparts, both titles originate from magazines articles first published in its related partwork from the same publisher.
  100. Since it first became available, the "Federation & Alien" (left) binder has been retailed continuously by the company's German webshop and was still in stock as late as 2021 – albeit language-adapted. [84]
  101. Aside from those countries where it had entered into joint ventures with established outside publishing partners (such as De Agostini in Japan), Eaglemoss has utilized Data Base Factory for its customer service, distribution, translation, and editorial services for the UK and non-English language areas. Data Base Factory is now a subsidiary of CCA International Inc.
  102. The company's discontinuation of non-English-language magazine releases were accompanied with not only the closure of the relevant official websites that had operated since the debut of the Collection in non-English territories, but also with the (premature) termination of subscription services in the foreign-language territories those websites had covered.
  103. In conjunction with the expansion from seventy to ninety issues, Robinson later confirmed that former Star Trek Producer Dave Rossi had made the entire starship database of the remastered Original Series available to the publication. [85] From this acquisition, Robinson scored a coup for his project as it constituted the first time that the remastered Original Series ships, particularly those specifically constructed for the production, [86] were made available for products produced for the general public. This availability enabled Robinson to incorporate several of these into the starships lineup past issue 50 (including issues 60 and 63) and the run increase enabled him to slate more for release in later issues. [87] Rob Bonchune contributed new meshes for issues 57 (though strictly speaking, this was Bonchune revisiting the model he had already constructed for Robinson in 1999 which had made its debut in Star Trek: The Magazine Volume 1, Issue 4) and 62 , as the remastered TOS CG models had not reached Robinson by the time the models were first required.
    However, these models were not quite production-ready, as CBS Digital had used Autodesk Maya software for their CGI effects at the time and the models needed to be converted into LightWave 3D, the software package of choice for the vast majority of Star Trek digital modelers. Robinson assigned Fabio Passaro, among others, to this chore. [88] Ironically, CBS Digital had originally bought the majority of the "hero" ship models from Finnish digital modeler Petri Blomqvist but had to convert them to Maya as he had constructed his models in LightWave. (Sci-fi & fantasy modeller, Vol. 26, p. 48-50) If his models were to be used (such as for the planned Terran Empire Enterprise extra issue), then they need to be reconverted back into LightWave.
  104. Following an unsuccessful search and appeal to a number of past Star Trek production artists, it appeared that the original CG models created for Star Trek: Insurrection and Star Trek Nemesis have been lost, necessitating Robinson's decision to commission all-new models for the Collection. [89][90] Robinson has also commented that some existing models might be in file formats that require computer software that no longer exists, sometimes due to the use of proprietary 3D software in the past. In addition, subsequent upgrades to LightWave software has resulted in alterations to the current appearance of some production-used models, as some legacy features (including some shaders) are no longer supported.
  105. Both incarnations of the Adam/McQuarrie-designed Planet of the Titans USS Enterprise study models (that were briefly seen on-screen as unidentified background ships) were slated for production as miniatures (with new CG models created by Eaglemoss) but after years without change in their licensing status by the licensor, Ben Robinson conceded that they "probably won't happen" due to legal ambiguities.

See also[]

External links[]

Official sites[]

Collector sites[]

This is a featured article. At the time it was featured (April 2020), it was considered one of the best examples of the Memory Alpha community's work. If you see a way this page can be improved further though, we invite you to contribute. You can use the links below to see how the article has changed since it was last featured.
Featured revision (2492013)Diff to currentBlurb
Advertisement